ICANING G10S Pro BT Voice Remote Control User Manual

1. Introduction

The ICANING G10S Pro BT is a versatile voice remote control featuring both Bluetooth 5.0 and 2.4G wireless connectivity. It functions as an air mouse with a built-in 6-axis gyroscope, supports voice search, and includes an IR learning function for essential controls. This remote is designed to enhance your experience with Android TV Boxes, PCs, Smart TVs, projectors, and other compatible multimedia devices.

2. Package Contents

Please check the package for the following items:

• 1 x G10S Pro BT Air Mouse Remote Control
• 1 x USB Nano Receiver (typically found in the battery compartment)
• 1 x User Manual

3. Product Features

• Dual Connectivity: Supports both 2.4G wireless connection via USB receiver and Bluetooth 5.0 (G10S Pro BT version only).
• Voice Search Function: Built-in high-fidelity voice microphone for easy voice commands and searches (compatible with Google Assistant).
• Air Mouse & Gyroscope: Equipped with a 3-Gyro + 3-Gsensor (6-axis gyroscope sensor) for precise motion sensing and cursor control.
• IR Learning Function: The 'Power' button can be programmed to learn infrared signals from other remote controls.
• LED White Backlight: Backlit buttons for improved visibility in low-light conditions (G10S Pro BT only).
• Durable Design: Multi-layer spraying process for a wear-resistant finish and comfortable grip.
• Energy Saving: Automatic sleep mode and low battery indicator (flashes at 10% battery) to conserve power.

4. Setup Instructions

4.1. Battery Installation

1. Open the battery compartment cover on the back of the remote control.
2. Insert two AAA batteries (not included) according to the polarity markings (+/-).
3. Close the battery compartment cover securely.

4.2. 2.4G Wireless Connection

This mode uses the included USB nano receiver.

1. Locate the USB nano receiver inside the remote's battery compartment.
2. Plug the USB nano receiver into an available USB port on your device (e.g., Android TV Box, PC, Smart TV).
3. The remote control should be automatically recognized and ready for use (plug and play).

4.3. Bluetooth Connection (G10S Pro BT version only)

This mode is primarily for Android systems, especially Android 10 ATV devices.

1. Ensure the USB receiver is disconnected from your device. The remote will prioritize 2.4G connection if the receiver is plugged in.
2. Press and hold the OK button and the Return button simultaneously for 3-5 seconds.
3. The remote will enter pairing mode. Look for the remote on your device's Bluetooth settings and select it to pair.

5. Operating Instructions

5.1. Button Layout

Familiarize yourself with the remote control's buttons:

5.2. Voice Search Function

To use voice search:

1. Press the Voice Switch button (microphone icon).
2. Speak clearly into the remote's microphone.
3. The device will process your command or search query.

5.3. Air Mouse & Gyroscope Function

The remote's built-in gyroscope allows for intuitive cursor control:

• Move the remote in the air to control the on-screen cursor.
• Press the Mouse On/Off button to toggle the air mouse function.

5.4. IR Learning Function

The 'Power' button on the G10S Pro BT can learn infrared signals from another remote control (e.g., your TV's power button).

1. Press and hold the Power button on the G10S Pro BT for 3 seconds. The red indicator light will flash slowly, indicating it has entered IR learning mode.
2. Point the infrared emitter of your original remote control (e.g., TV remote) directly at the G10S Pro BT's infrared receiver (located at the top) at a distance of approximately 2-3 cm.
3. Press the Power button on your original remote control. The G10S Pro BT will receive the infrared code, and its red indicator light will flash rapidly and then turn off, signifying successful learning.
4. The learned code is automatically stored.
5. To clear the learned IR code, press and hold the OK and DEL buttons simultaneously.

5.5. Backlight Control

To turn the LED backlight on or off, press and hold the Backlit On/Off button (light bulb icon) for 3 seconds.

6. Compatibility

The G10S Pro BT is compatible with a wide range of devices:

• Supported Devices: Android TV Box, PC, Smart TV, Projector, HTPC, Raspberry Pi, All-in-one PC, Mobile phones (with OTG support), Tablets (with OTG support).
• Voice Control: Requires a TV Box with Voice Assistant. In Bluetooth mode, voice function primarily supports ATV system devices. In 2.4G mode, it supports most Android devices with voice capabilities.
• Known Compatible TV Boxes: H96 MAX+, T9, V1, X96MAX, etc.
• Known Incompatible Devices: TX3 mini, X96W (S905W), X92, X98 PRO, Magicsee N5 TV box, Fire TV, Fire TV Stick, Xiaomi TV, and some Smart TVs (due to blocked third-party USB dongles).

If using with an Android TV box, it is recommended to install "Google Assistant" for optimal voice control functionality.

7. Maintenance

• Keep the remote control dry. Avoid exposure to moisture or liquids.
• Clean the remote with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Avoid exposing the remote to extreme temperatures (hot or cold).
• If the remote will not be used for an extended period, remove the AAA batteries to prevent leakage.

8. Troubleshooting

8.1. Voice Control Not Working

• Check Device Compatibility: Ensure your TV Box or device has a Voice Assistant installed and enabled.
• Mode Check: If using Bluetooth mode, ensure your device is an ATV system. For other Android devices, try 2.4G mode (with USB receiver).
• App Installation: For Android TV boxes, ensure "Google Assistant" is installed.
• Incompatible Devices: Refer to the compatibility section (Section 6) for a list of known incompatible devices.

8.2. Air Mouse Not Responding

• Battery Level: Check if the batteries are low. Replace them if necessary.
• USB Receiver (2.4G Mode): Ensure the USB receiver is securely plugged into your device. Try a different USB port.
• Bluetooth Pairing (Bluetooth Mode): Confirm the remote is successfully paired via Bluetooth in your device's settings.
• Obstructions: Ensure there are no physical obstructions between the remote and the USB receiver (for 2.4G) or the device (for Bluetooth).

8.3. IR Learning Not Working

• Button Limitation: Only the 'Power' button supports IR learning.
• Procedure: Carefully follow the IR learning steps in Section 5.4. Ensure the original remote's IR emitter is pointed directly at the G10S Pro BT's IR receiver at a close distance (2-3 cm).
• Indicator Light: Observe the red indicator light for correct flashing patterns during the learning process.

8.4. Remote Not Compatible with Smart TV

• Some Smart TVs may block third-party USB dongles or have proprietary remote protocols. Verify if your Smart TV supports universal USB remote controls.

9. Specifications

10. User Tips

• Smartphone Connectivity: Yes, this remote can connect with a smartphone if the smartphone supports OTG (On-The-Go) functionality for USB devices.
• Projector Power Control: If your projector's power button isn't working, use the IR learning function (Section 5.4) to program the remote's 'Power' button with your projector's original remote.
• Bluetooth Pairing for Tablets: For devices like the Samsung Galaxy TAB a7, ensure the USB receiver is unplugged, then press and hold the 'OK' and 'Return' buttons simultaneously for 3-5 seconds to enter Bluetooth pairing mode.

11. Warranty and Support

For any issues, questions, or support needs regarding your ICANING G10S Pro BT Voice Remote Control, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.