1. Product Overview
The RainPoint Smart 2 Zone Watering Timer is an advanced irrigation system designed to automate and optimize your garden watering. Featuring two independent outlets, it allows for precise control over two separate watering zones. This device integrates with the Homgar app, offering remote control, smart scheduling, and water usage monitoring capabilities.
2. Setup Guide
2.1 Package Contents
Before installation, ensure all components are present:
- RainPoint Smart 2 Zone Watering Timer
- WiFi Hub
- User Manual (this document)
- Required: 4 x AA batteries (not included)
2.2 Physical Installation
- Install Batteries: Open the battery compartment on the back of the watering timer and insert 4 new AA batteries. The indicator light will quickly blink red.
- Connect to Faucet: Attach the watering timer to any standard outdoor faucet. The 360° rotatable interface allows for effortless installation.
- Connect Hoses: Connect your garden hoses to the two independent outlets (Zone 1 and Zone 2) at the bottom of the timer.
2.3 App Installation & Pairing
- Download App: Download the "Homgar" app from your smartphone's app store (iOS or Android).
- Add Device:
- Open the Homgar app.
- Select the "+" symbol to add a new device.
- Alternatively, go to the hub's home page and use "Sub-devices" to add devices.
- Select Device Type: Find and select the "2-ZONE Water Timer" icon (represented by two faucet symbols) to add your HTV213 2-Zone Water Timer.
- Pairing: While the timer's indicator light is blinking red (after battery insertion), select "Next" in the app to start searching for your device. The app will guide you through the pairing process.
3. Operating Instructions
3.1 Watering Modes
The timer supports two primary watering modes:
- Irrigation Mode: For standard watering, with durations from 1 minute to 12 hours. Repeat options include Everyday, Odd Day, Even Day, or Custom.
- Mist Mode: For shorter, more frequent watering, ideal for adding moisture on hot days. Watering time from 1 second to 60 minutes, with intervals from 1 second to 60 minutes.
3.2 Scheduling and Smart Features
- Multiple Plans: Each of the two zones can have up to 6 different watering plans.
- Watering by Usage: Utilize the built-in flow meter to schedule watering based on exact gallon measurements (minimum 0.1 gal).
- Weather-Based Smart Watering: The app adjusts schedules based on local weather forecasts. A rain delay function (24, 48, or 72 hours) can be manually activated or automatically applied to prevent overwatering.
- Soil Sensor Integration: When paired with a compatible WiFi soil sensor (sold separately), the system can automatically monitor soil temperature and humidity, adjusting watering based on soil moisture levels.
3.3 Control Methods
- App Control: Manage all settings, schedules, and monitoring through the Homgar app from anywhere.
- Voice Control: Compatible with Google Assistant and Amazon Alexa for hands-free operation.
- Manual Buttons: Physical buttons on the timer allow for quick manual watering for 1-10 minutes.
3.4 Monitoring and Expandability
- Water Consumption Tracking: Review monthly and yearly water consumption data history directly on the app.
- Leak Alert Function: The built-in flow meter can detect leaks and send real-time notifications to your app.
- Expandable System: One WiFi hub can connect and manage up to 4 WiFi water timers and 1 WiFi soil sensor, allowing for a comprehensive smart irrigation system.
- Family Sharing: The Homgar app supports co-management, allowing multiple family members to control the irrigation schedules.
4. Maintenance
- Battery Replacement: Replace the 4 AA batteries when the low battery indicator appears in the app or on the device. Ensure correct polarity.
- Cleaning: Periodically clean the exterior of the timer with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
- Winterization: Before freezing temperatures, disconnect the timer from the faucet and hoses. Remove batteries and store the device indoors in a dry, protected area to prevent damage from freezing water.
5. Troubleshooting
- Device Not Pairing:
- Ensure fresh AA batteries are correctly installed and the indicator light is blinking red.
- Make sure the WiFi Hub is powered on and within range (up to 60m, depending on obstacles).
- Confirm your router is broadcasting a 2.4GHz WiFi signal, as the device communicates via WI-FI 2.4G and RF 433MHz.
- Try resetting the timer by re-inserting the batteries or holding the left button (if applicable) to re-enter pairing mode.
- Leak Alert Notification: If you receive a leak alert, immediately check all connections (faucet, timer outlets, hoses) for tightness and inspect hoses for damage.
- No Water Flow: Check water supply to the faucet, ensure the timer is not in a paused or off state in the app, and verify battery levels.
- Inaccurate Water Usage: Ensure the flow meter is clear of debris.
6. Specifications
| Feature | Specification |
|---|---|
| Inlet Thread | 1" or 3/4" |
| Outlet Thread | 3/4" |
| Operating Water Pressure | 0.5~8 bar (7-116 PSI) |
| Flow Rate | 5~35 L/Min (1.32~9.25 GAL/Min) |
| Watering Duration | 1 Min ~ 12 hrs |
| Waterproof Level | IP54 |
| Maximum Plans per Zone | 6 |
| Working Temperature | 3℃~50℃ (37℉~122°F) |
| Communication Protocol | WI-FI 2.4G and RF 433MHz |
| Wireless Range (Hub to Timer) | Up to 60m (depending on obstacles) |
| Power Source | 4 x AA batteries (not included) |
7. Warranty and Support
RainPoint offers support for its products. If you encounter any issues or have questions, please refer to the following:
- Returns: You have 7 days to contact the seller and 30 days to return the item from the date it was received if it is considered defective or not as advertised.
- Contact: For further assistance, please contact the seller directly through the platform where you purchased the product.
8. User Tips
- Easy Setup: Many users find the setup process to be straightforward and quick. Follow the app's instructions carefully for a smooth experience.
- Check Package Contents: Upon receiving your order, verify that all expected components, especially the timer and hub, are included. If you ordered a bundle with a soil sensor, confirm its presence.
- Thread Compatibility: The timer uses standard 1" or 3/4" inlet and 3/4" outlet threads. Ensure compatibility with your existing garden hose connections.
- Hub Placement: For optimal performance, place the WiFi Hub in a central location, minimizing obstacles between it and the watering timer to ensure a stable RF 433MHz connection.
- Battery Quality: Use high-quality AA batteries for reliable operation and to avoid frequent replacements.