Newmen SK01

Contents

Newmen SK01 Ultrathin Three Mode Wireless Mechanical Keyboard User Manual

Model: SK01

1. Introduction

This manual provides instructions for the Newmen SK01 Ultrathin Three Mode Wireless Mechanical Keyboard. This 100-key keyboard features multiple connection options, RGB backlighting, hot-swappable mechanical switches, and a durable aluminum alloy body, designed for both office and gaming use.

Newmen SK01 Ultrathin Three Mode Wireless Mechanical Keyboard
Figure 1: Newmen SK01 Ultrathin Three Mode Wireless Mechanical Keyboard.

2. Setup and Connection

The Newmen SK01 keyboard supports three connection modes: Wired (Type-C), 2.4G Wireless, and Bluetooth.

2.1. Wired Connection

Connect the keyboard to your computer using the provided Type-C USB cable. The keyboard will be automatically recognized and ready for use.

2.2. 2.4G Wireless Connection

  1. Insert the 2.4G USB receiver into an available USB port on your computer.
  2. Turn on the keyboard and switch it to 2.4G wireless mode (refer to the keyboard's physical switch or key combination for mode selection).
  3. The keyboard should automatically connect to the receiver.

2.3. Bluetooth Connection

  1. Turn on the keyboard and switch it to Bluetooth mode (refer to the keyboard's physical switch or key combination for mode selection).
  2. On your device (computer, laptop, tablet), go to Bluetooth settings and search for new devices.
  3. Select "Newmen SK01" (or similar name) from the list of available devices to pair.
  4. Follow any on-screen prompts to complete the pairing process.
Newmen SK01 keyboard showing Bluetooth, Wired, and 2.4G wireless connection modes
Figure 2: The Newmen SK01 supports three connection modes: Bluetooth, Wired, and 2.4G Wireless.

2.4. Hot-Swappable Switches

The SK01 features hot-swappable mechanical switches, allowing you to easily change switches without soldering. This enables customization of typing feel and sound.

Newmen SK01 keyboard with keycaps and switches removed, showing hot-swap sockets
Figure 3: Hot-swappable switch design for easy customization.

3. Operation

The Newmen SK01 is a 100-key mechanical keyboard designed for efficient typing and gaming.

3.1. Key Layout and Functions

The 100-key layout provides a compact design while retaining most essential keys, including a numeric keypad. Specific function key combinations (Fn + F-keys, etc.) may be available for media control, backlight adjustments, and other shortcuts. Refer to the keyboard's keycap legends for specific functions.

3.2. RGB Backlighting

The keyboard features customizable RGB backlighting. Various lighting effects and brightness levels can be adjusted using dedicated key combinations or software (if available). The backlight color is MULTICOLOR.

3.3. N-Key Rollover

The SK01 supports N-Key Rollover (Full key No flushing), ensuring that every key press is registered accurately, even when multiple keys are pressed simultaneously. This is particularly beneficial for fast typing and gaming.

Newmen SK01 keyboard in use with a smartphone and glasses, highlighting its compact 100-key layout
Figure 4: The 100-key layout offers a balance of compactness and functionality.

4. Maintenance

Proper maintenance will ensure the longevity and optimal performance of your Newmen SK01 keyboard.

4.1. Cleaning the Keyboard

  • Aluminum Alloy Body: The keyboard's shell is made of aluminum alloy with an anodized surface. Wipe the surface gently with a soft, damp cloth. Avoid abrasive cleaners or solvents.
  • Keycaps: The PBT double-shot molding keycaps are durable. For general cleaning, you can use a soft brush or compressed air to remove dust and debris. For deeper cleaning, keycaps can be carefully removed and washed with mild soap and water, then thoroughly dried before reattaching.

4.2. Switch Replacement

Thanks to the hot-swappable design, individual switches can be replaced if they become faulty or if you wish to change the typing feel. Use a switch puller tool (often included with hot-swappable keyboards) to gently remove the switch, and then press a new compatible 3-pin or 5-pin mechanical switch into place.

Close-up view of the Newmen SK01 keyboard's aluminum alloy body
Figure 5: The high-quality aluminum alloy body is durable and easy to maintain.

5. Troubleshooting

If you encounter issues with your Newmen SK01 keyboard, try the following troubleshooting steps:

  • Keyboard not responding (Wired):
    • Ensure the Type-C cable is securely connected to both the keyboard and your computer.
    • Try a different USB port on your computer.
    • Test with a different Type-C cable if available.
  • 2.4G Wireless connection issues:
    • Ensure the 2.4G USB receiver is properly inserted into a USB port.
    • Verify the keyboard is switched to 2.4G mode.
    • Try moving the keyboard closer to the receiver.
    • Ensure there are no strong interferences (e.g., other wireless devices) nearby.
  • Bluetooth connection issues:
    • Ensure the keyboard is in Bluetooth pairing mode.
    • Make sure Bluetooth is enabled on your device.
    • Remove "Newmen SK01" from your device's paired Bluetooth devices list and attempt to re-pair.
    • Try connecting to a different Bluetooth-enabled device to isolate the issue.
  • Backlight not working or inconsistent:
    • Check if the backlight is turned off or set to the lowest brightness level via keyboard shortcuts.
    • Ensure the keyboard battery has sufficient charge if in wireless mode.
  • Keys not registering:
    • For specific keys, try removing the keycap and switch (if hot-swappable) and reseating the switch firmly.
    • Ensure the keyboard is clean and free of debris under the keycaps.
  • Battery not charging:
    • Ensure the Type-C cable is properly connected for charging.
    • Try a different USB port or charger.
    • Allow sufficient time for charging.

6. Specifications

FeatureSpecification
Product ModelSK01
Keyboard Standard100 Keys
Connection ModesType-C (Wired), Bluetooth, 2.4G Wireless (Three Mode)
Keycap MaterialPBT plastic, Double-shot molding
Keycap PrintingDye-sublimation
Keycap TypeLSA height
SwitchesMechanical, Hot-swappable (OUTEMU blue/brown/red options)
BacklightRGB, Multicolor
N-Key RolloverSupported (Full key No flushing)
Body MaterialAluminum alloy
StyleStandard, Ergonomics
ApplicationDesktop, Laptop, Number
Battery Capacity2000mAh
Wrist SupportNo
Full Size KeyboardNo
PackageYes
OriginMainland China
CertificationNone
Additional FeaturesGasket structure, Dwarf axis

7. Warranty and Support

For any issues or concerns regarding your Newmen SK01 keyboard, please contact the seller or retailer from whom you purchased the product. They will assist you with troubleshooting, returns, or warranty claims according to their policies.

The seller states: "If you are not satisfied with the items, please feel free to contact us for solution instead of leaving neutral or negative feedback, which means you do not need our after-sale service. We will try our best to solve the problem."

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.