1. Introduction
Thank you for choosing the fenvi WiFi 7 BE200 PCIe Wireless Adapter. This adapter is designed to provide high-speed wireless connectivity and Bluetooth 5.4 capabilities for your desktop computer. Featuring the Intel BE200NGW chipset, it supports the latest 802.11be standard across tri-bands (2.4GHz, 5GHz, and 6GHz), offering superior performance for gaming, streaming, and general internet use.
This manual provides essential information for the safe and efficient use of your new wireless adapter. Please read it thoroughly before installation and operation.
2. Safety & Warnings
Important Safety Information:
- Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- Do not use this product for purposes other than its intended use.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- Do not expose to water or moisture.
3. Package Contents
Please check the package contents upon receipt. If any items are missing or damaged, contact your retailer.
- fenvi WiFi 7 BE200 PCIe Wireless Adapter Card with Heatsink
- Intel BE200NGW M.2 Module (pre-installed on adapter card)
- Two Detachable High-Gain Antennas
- Low-Profile Bracket
- USB Cable for Bluetooth Functionality

4. Specifications
| Feature | Specification |
|---|---|
| Model Name | BE200 PCIE Adapter / be200ngw pcie adapter |
| Chip | for Intel be200 be200ngw |
| Wireless Communication Standard | 802.11.be (WiFi 7) |
| Wireless Protocol | 802.11n, 802.11ax (802.11ax), 802.11a/g, 802.11ac |
| Frequency Band Class | Tri-Band (2.4Ghz, 5Ghz, 6Ghz) |
| Wireless Transmission Rate | Up to 8774Mbps (574Mbps @ 2.4GHz, 2400Mbps @ 5GHz, 5800Mbps @ 6GHz) |
| Bluetooth Protocol | Bluetooth 5.4 |
| Interface Type | PCI Express (PCI-E X1, X4 or X16 slot) |
| Adapter Socket | PCI-E |
| Applicable Network Type | Ethernet (Wireless) |
| Lan Transmission Rate | 1000M Ethernet (via PCIe interface) |
| Heat Dissipation | Support (Integrated Heatsink) |
| Compatible Operating Systems | Windows 10/11 64bit and Linux |
| Features | WiFi 7, MU-MIMO & OFDMA |
| Certification | CE |

5. Setup Instructions
5.1 Hardware Installation
- Power Off PC: Completely shut down your computer and disconnect the power cable.
- Open PC Case: Remove the side panel of your computer case.
- Locate PCIe Slot: Find an available PCI Express slot (PCI-E X1, X4, or X16) on your motherboard.
- Install Adapter Card: Carefully insert the fenvi WiFi 7 BE200 adapter card into the chosen PCIe slot until it is firmly seated. Secure the card with a screw to the PC case.
- Install Antennas: Screw the two detachable antennas onto the connectors at the back of the adapter card. Adjust their orientation for optimal signal reception.
- Connect Bluetooth USB Cable: Connect one end of the provided USB cable to the small port on the adapter card and the other end to an available 9-pin USB header on your motherboard. This connection is essential for Bluetooth functionality.
- Close PC Case: Replace the side panel of your computer case and reconnect the power cable.
- Power On PC: Turn on your computer.


5.2 Driver Installation
For the adapter to function correctly, you must install the appropriate drivers.
- Download Drivers: Please obtain the corresponding drivers for the Intel BE200NGW chipset from the official fenvi website or Intel's support website. Ensure you download the correct drivers for your operating system (Windows 10/11 64bit or Linux).
- Install Drivers: Follow the on-screen instructions to install the downloaded drivers. You may need to restart your computer after installation.
6. Operating Instructions
6.1 Connecting to Wi-Fi
- Once drivers are installed, your computer should detect the new wireless adapter.
- Open your operating system's Wi-Fi settings.
- Select your desired Wi-Fi network (2.4GHz, 5GHz, or 6GHz band) from the list of available networks.
- Enter the network password if prompted and click 'Connect'.
- The adapter supports Tri-Band connectivity, allowing you to connect to the optimal frequency for your network environment.
- Leverage advanced features like MU-MIMO and OFDMA for improved network efficiency and performance with compatible routers.
Note: 6GHz WiFi functionality only works on Windows 10/11 64bit operating systems.
6.2 Using Bluetooth 5.4
- Ensure the Bluetooth USB cable is correctly connected to both the adapter card and your motherboard's USB header.
- Open your operating system's Bluetooth settings.
- Turn on Bluetooth and put your desired Bluetooth device into pairing mode.
- Select your device from the list of available devices and follow any on-screen prompts to complete the pairing process.

7. Maintenance
- Keep Clean: Periodically clean your computer's interior to prevent dust buildup on the adapter's heatsink, which can affect performance. Use compressed air for best results.
- Ensure Airflow: Make sure your PC case has adequate airflow to prevent overheating of internal components, including the wireless adapter.
- Driver Updates: Regularly check the official fenvi or Intel websites for updated drivers to ensure optimal performance and security.
- Antenna Position: Adjust the antennas as needed to maintain the best possible signal strength.
8. Troubleshooting
- No Wi-Fi Connection:
- Ensure the adapter card is correctly seated in the PCIe slot.
- Verify that the latest drivers are installed.
- Check if your Wi-Fi router is powered on and broadcasting a signal.
- Confirm that your operating system is Windows 10/11 64bit or Linux, as other OS are not supported.
- No Bluetooth Functionality:
- Ensure the small USB cable is securely connected between the adapter card and a 9-pin USB header on your motherboard.
- Check Bluetooth settings in your operating system to ensure it's enabled.
- Verify Bluetooth drivers are correctly installed.
- Slow Wi-Fi Speeds:
- Ensure you are connected to the appropriate band (5GHz or 6GHz for higher speeds, if available).
- Check for interference from other devices or physical obstructions.
- Update your router's firmware and ensure it supports WiFi 7 (802.11be) for optimal performance.
- Confirm your router supports MU-MIMO and OFDMA for improved efficiency.
- Adapter Not Detected:
- Re-seat the adapter card in the PCIe slot.
- Try a different PCIe slot if available.
- Ensure your motherboard's BIOS/UEFI settings are configured correctly for PCIe devices.
- Compatibility Issue with AMD Systems:
- Note: The Intel BE200 chipset is generally not compatible with AMD platforms. This adapter is designed for Intel-based systems.
9. User Tips
- Desktop PC Use: This adapter is specifically designed for desktop PCs with available PCI Express slots. It is not intended for use in notebooks or other form factors.
- Driver Source: Always download drivers directly from the official Intel website or fenvi's official support page to ensure authenticity and the latest versions.
- 6GHz Band: To utilize the 6GHz band, ensure your operating system is Windows 10/11 64bit and your Wi-Fi router also supports the 6GHz band (WiFi 6E or WiFi 7).
10. Warranty & Support
For warranty information, technical support, or further assistance, please contact the manufacturer:
Manufacturer: Shenzhen Fenvi Technology Co., LTD.
Address: 401 North Block, Beier Road, Hi-tech Industrial Park, Bantian Subdistrict, Longgang District, Shenzhen, Guangdong Province, China
Phone: 0755-83628485
EU Authorized Representative: E-CrossStu GmbH
Address: Mainzer Landstr.69, e-crossstu@outlook.com
Phone: +49-69332967674
You can also refer to the official product manual PDF for additional details: View User Manual (PDF)