JIKONG Smart BMS 8S

Contents

JIKONG Smart BMS 8S User Manual

Model: Smart BMS 8S

1. Introduction

The JIKONG Smart BMS 8S is an advanced Battery Management System designed to protect and optimize the performance of Li-ion, LiFePo4, and LTO battery packs. This smart BMS features active balancing, comprehensive protection functions, and communication capabilities via CAN, Heat, and RS485 interfaces, along with Bluetooth connectivity for mobile app control.

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your JIKONG Smart BMS 8S.

Text description for non-visual users: A video demonstrating the JIKONG Smart BMS unit, showcasing its physical appearance and some features.

2. Safety Information

WARNING: Improper installation or use of this BMS can lead to serious injury, fire, or damage to the battery pack. Always follow these instructions carefully.

  • Ensure all connections are correct and secure before applying power.
  • Work in a well-ventilated area.
  • Wear appropriate personal protective equipment (PPE), including safety glasses and insulated gloves.
  • Do not short-circuit the battery terminals or BMS connections.
  • Keep the BMS away from water, moisture, and flammable materials.
  • If you are unsure about any step, consult a qualified professional.

3. Package Contents

Please check the package carefully to ensure all items are present and undamaged:

Image showing JIKONG Smart BMS, operation manual, screws, NTC temperature sensor, switch, CAN cable, and balance wires.

Text description for non-visual users: The package typically includes the JIKONG Smart BMS unit, an operation manual, 4 screws, an NTC temperature sensor (40cm), an active switch (50cm), a CAN cable (25cm), and two sets of balance wires (70cm each).

  • JIKONG Smart BMS Unit (with Bluetooth built-in)
  • Operation Manual
  • Screws (x4)
  • NTC Temperature Sensor (40cm)
  • Active Switch (15cm or 50cm depending on model)
  • CAN Cable (25cm, if applicable to model)
  • Balance Wires (70cm)
  • Heating Cable (Only for BMS models with heating function)

4. Specifications

The JIKONG Smart BMS 8S is available in several configurations. Key specifications are detailed below:

AttributeValue
Brand NameSMART JKBMS
TypeLI-ION Battery BMS
Battery Strings4S-8S (some models 3S-8S)
Battery TypeLi-ion/LiFePo4/LTO
Balance FunctionActive Balanced BMS
Active Balance Current1A / 2A (depending on model)
Handware or SmartSMART BMS
Charge and Discharge PortCommon Port BMS
Charging Current100A - 200A (depending on model)
FunctionOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection
CommunicationRS485/BT (CAN optional)
CertificationCE, FCC, RoHS
Usage ScenarioPower BMS, Energy Storage BMS, 3C Digital BMS
OriginMainland China

For detailed specifications of specific models, please refer to the table below:

Detailed specification table for various JIKONG BMS models including BD4A8S10P, BD4A17S4P, BD4A20S6P, BD4A20S8P, BD4A17S6P, BD4A20S8P, BD4A20S6P, BD4A20S8P, BD4A20S10P, BD1A17S10P, BD1A17S15P, BD2A24S15P, BD2A24S20P, B1A8S10P, B1A8S10P-HC, B1A8S20P, B1A8S20P-HC, B2A8S20P, B2A8S20P-HC. The table lists parameters like Item, Li-ion String, LiFePo4 String, LTO String, Balance method, Balance current, Continuous current, MAX discharge current, Interface, Dimension, Voltage acquisition, Overcharge protection, Overdischarge protection, Overcurrent protection, Short circuit, Temperature protection, Counter, and APP.

Text description for non-visual users: The detailed specification table provides specific values for different JIKONG BMS models (e.g., JK-B1A8S10P, JK-B2A8S20P, etc.) across various parameters such as supported battery strings (Li-ion, LiFePo4, LTO), balance current (1A or 2A), continuous current (100A-200A), maximum discharge current (300A-400A), interfaces (RS485, CAN, Heat), dimensions, and various protection thresholds (overcharge, overdischarge, overcurrent, short circuit, temperature). All models support iOS/Android APP.

5. Setup and Installation

Follow these steps to correctly install your JIKONG Smart BMS:

  1. Hardware Connection: Connect the protection board and battery pack according to the provided wiring diagram. Ensure that the last "B+" line of the cable is connected to the main positive pole of the battery. The total voltage of the battery pack must be greater than 20V (for default BMS) or 10V (for 4S BMS) before starting up.
  2. Wiring Diagram: Refer to the diagram below for proper connection of the BMS to your battery pack, load, and charger.
  3. Wiring diagram showing connections for a battery pack, BMS, load, and charger. It illustrates the balance wires connecting to individual cells, and main power cables for B-, P-, Load, and Charger.

    Text description for non-visual users: The wiring diagram illustrates the connection of the BMS to a battery pack. The main negative terminal of the battery (B-) connects to the B- terminal on the BMS. The main negative output for load and charger (P-) connects to the P- terminal on the BMS. Individual balance wires connect from each cell's positive terminal to the corresponding sampling port on the BMS. The load and charger are connected to the P- and B+ terminals.

  4. BMS Connection Scheme: A more detailed connection scheme is provided below.
  5. Detailed JIKONG BMS wire diagram showing connections for B+, B-, and individual cell balance wires (1S, 2S, 3S, etc.) and heating pad connections.

    Text description for non-visual users: This diagram displays the precise connection points on the JIKONG Smart BMS. It highlights the B- and P- terminals, along with multiple ports for balance wires (labeled 1S, 2S, 3S, etc., up to B+), and a heating pad connection.

  6. BMS Interfaces: Understand the various interfaces on your BMS unit.
  7. Image showing the various interfaces on the JIKONG BMS: Temperature sensor, Other functions (customized), LCD (by default), RS485 (by default), and Heat Function (needs customization).

    Text description for non-visual users: The image displays the side interfaces of the BMS, including ports for a temperature sensor, customized functions, LCD display (default), RS485 communication (default), and a heat function port (customizable).

  8. Activation: Use the display activation button or an additional switch to activate the BMS.
  9. Heating Cable Note: For instructions on heating cables, the green 5PIN cable of the heating cable needs to be connected to the heating pad. The black and red cables are connected without any equipment. If there is a smart charger, the black and red cables are connected to the smart charger. After the smart charger is connected to the BMS, it detects the temperature of the battery through the BMS and automatically monitors the charging status of the battery.

6. Operating Instructions

Your JIKONG Smart BMS offers intelligent control and monitoring via a mobile application.

  1. Mobile App Connection:
    • Turn on GPS and Bluetooth on your mobile phone.
    • Ensure your mobile Bluetooth is turned on, then open the JIKONG BMS APP.
    • Click on the top left corner of the APP to search for devices.
    • Click on the device name to connect. The default password is "1234".
  2. Initial Parameter Setup:
    • For the first start-up, parameters need to be set. Setting requires a password. The default parameter setting password is "123456".
    • Simply set the number of units (battery strings) and battery type (Li-ion/LiFePo4/LTO).
  3. Monitoring Battery Status:
    • Once parameters are set, go back to the real-time status page.
    • Check the battery status; ensure no error messages are prompted for normal operation.
    • In the app, blue indicates the highest cell voltage, and red indicates the lowest cell voltage.
  4. Screenshot of the JIKONG Smart BT APP showing real-time battery monitoring data, including charge/discharge status, battery power, voltage, current, cell voltages, and temperature.

    Text description for non-visual users: The mobile app allows monitoring of battery data in real-time, modification of related parameters, control of the BMS balance switch, and supports both Android and iOS systems. The screenshot shows detailed battery information like charge/discharge status, battery power, remaining capacity, cell voltages, and temperatures.

    Three screenshots of the JIKONG BMS mobile app showing different screens: real-time data, basic settings, and advanced settings/controls.

    Text description for non-visual users: The image displays three different views of the JIKONG BMS mobile app. The first shows real-time battery data, the second shows basic settings like cell count and battery capacity, and the third shows advanced settings and control options such as charge/discharge, balance, emergency, disable temp sensor, and port switch (CAN/RS485).

  5. Smart Energy Working Modes: The BMS supports various working modes to optimize battery life and performance.Diagram illustrating the smart energy working mode switching of the JIKONG BMS: Storage Mode, Normal Working Mode, Standby Mode, and Shutdown.

    Text description for non-visual users: This diagram explains the four smart energy working modes: Storage Mode (transportation/offline, no current consumption), Normal Working Mode (activated by charger, all protections and functions active), Standby Mode (static state, no charge/discharge, automatic entry after set time), and Shutdown (prevents wasting power, automatic shutdown below shutdown voltage).

    • Storage Mode: In transportation/offline or wireless transmission off mode, the BMS is in storage mode, which does not consume battery pack current.
    • Normal Working Mode: When the charger is inserted in the storage mode and off mode, the BMS will immediately return to the normal working mode, and all the protection functions, equalization functions, and communication functions will return to normal working.
    • Standby Mode: When the battery pack is in the static state (no charge and discharge current and no equilibrium current), the BMS will automatically enter the standby state after the set time (1-30 days can be set) is exceeded.
    • Shutdown: To prevent the BMS from wasting power for a long time and damaging the battery pack, the BMS has an automatic shutdown voltage, and the BMS automatically shuts down when a cell falls below the shutdown voltage.
  6. Heating Function:
    • The heating function is activated by detecting battery temperature, combined with low-temperature protection during charging.
    • Only BMS models with "Heat" in their model name support this function.
    • The heating interface requires an external heating film or charger. The green cable connects to the heating film, and the red and black cables connect to the charger.
    • Maximum heating power is 3A, and maximum heating voltage is 100V.
    • Heating is activated when the battery temperature is lower than the low-temperature protection threshold for charging.
    • Heating via the heating film consumes battery power. Heating via the charger is related to the protection board hardware and charger.

7. Maintenance

  • Regularly check all wiring connections for tightness and corrosion.
  • Keep the BMS unit clean and free from dust and debris.
  • Avoid exposing the BMS to extreme temperatures or humidity.
  • Periodically check the battery cell voltages via the mobile app to ensure proper balancing.
  • If the BMS is not in use for an extended period, ensure it is in "Storage Mode" to prevent unnecessary power consumption.

8. Troubleshooting

This section addresses common issues you might encounter with your JIKONG Smart BMS.

8.1. BMS Does Not Turn On

  • Ensure that the last "B+" line of the cable has been connected to the positive pole of the battery.
  • Start up after charging and ensure that the charger voltage is greater than 4V of the battery pack voltage.
  • Check whether the charger has voltage output.

8.2. Inaccurate Voltage Readings

  • Measure the actual total pressure of the battery pack with a multimeter.
  • Fill the actual total pressure in the "voltage calibration" setting on the parameter setting page in the app.

8.3. Inaccurate Current Readings

  • The B- and P- terminals of the protection board are two 7AWG wires; both need to be connected in parallel, otherwise it will lead to current error.
  • Measure the actual current of the battery pack with a clamp meter.
  • Fill the actual current into the "current calibration" setting on the parameter setting page in the app. A larger actual current generally leads to higher calibration accuracy.

8.4. Inaccurate Capacity Readings

  • An initial capacity estimated according to the monomer voltage when the protection board is powered on for the first time may be inaccurate.
  • After the protection board is discharged to the cut-off voltage and then fully charged, the capacity is calibrated. The charging process cannot be interrupted during this calibration.

8.5. Designed String Number Inconsistent with Actual String Number

  • Check whether the "unit quantity" in the parameter setting is set correctly in the app.
  • If there is no voltage in two or more strings in the middle, check whether the acquisition cable has fallen off or is improperly connected.

9. User Tips

  • Initial Check: Upon receiving your package, always verify the contents against the packing list and inspect for any visible damage before proceeding with installation.
  • App Exploration: Take time to explore all the settings and monitoring features within the JIKONG BMS mobile application. Understanding these functions will help you get the most out of your battery system.
  • Firmware Updates: Periodically check for firmware updates for your BMS through the official channels or app store to ensure optimal performance and access to new features.

10. Warranty and Support

JIKONG products are designed for reliability and performance. For specific warranty details, please refer to the documentation provided with your purchase or contact your retailer. For technical support, please visit the official JIKONG BMS website or contact their customer service.

Official instructions and protocol links:


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.