1. Product Overview
The ENCHEN Hummingbird Electric Hair Clipper is a versatile grooming tool designed for precise haircuts, beard maintenance, and various hair styling needs. It features a T-shaped cutter head, powerful motor, and a long-lasting rechargeable battery, all while operating with low noise.
2. Package Contents
- 1 x ENCHEN Hummingbird Electric Hair Clipper
- 3 x Limit Combs (0.5mm, 1mm, 1.5mm)
- 1 x USB Charging Cable
- 1 x Cleaning Brush
- 1 x Lubricating Oil Bottle
- 1 x User Manual (this document)
3. Setup and Charging
3.1 Initial Charge
Before first use, fully charge the hair clipper. The device uses a USB-B charging port.
- Connect the USB charging cable to the clipper and a suitable USB power source (e.g., wall adapter, power bank).
- The indicator light will blink red during charging.
- A full charge takes approximately 3 hours.
- Once fully charged, the indicator light will turn solid white.
- The clipper can be used for up to 120 minutes on a full charge. It can also be used while charging.
3.2 Attaching and Detaching Trimmer Blade
The trimmer blade can be detached for cleaning and oiling.
- To detach: Place your thumb on the blade and push it in the direction of the arrow (away from the clipper body). The blade unit will pop off.
- To attach: Align the guiding slot on the blade unit with the corresponding lug on the clipper body. Insert the lug properly and push the back of the blade onto the trimmer until it clicks into place.
3.3 Attaching Limit Combs
Select the desired limit comb (0.5mm, 1mm, or 1.5mm) for your preferred haircut length.
- Align the comb with the trimmer blade and slide it on until it securely clicks into place.
- To remove, gently pull the comb away from the blade.
4. Operating Instructions
4.1 Power On/Off
Press the power button located on the front of the clipper to turn it on or off.
4.2 Hair Trimming
- Ensure the desired limit comb is securely attached for the preferred hair length.
- For precise trimming, the T-shaped cutter head is ideal for oil head gradient styles, blending, fading, and carving.
- The ultra-thin 0.3mm blade allows for quick finishing of bald heads.
- The clipper can be used for both wet and dry haircuts.
- Move the clipper against the direction of hair growth for an even cut.
4.3 Beard Maintenance
Use the attachment combs to achieve consistent cut lengths and a balanced shape for beard maintenance.
5. Maintenance
5.1 Cleaning the Blades
- After each use, detach the trimmer blade unit as described in Section 3.2.
- Rinse the blade part with water to remove hair clippings.
- Use the provided cleaning brush to remove any stubborn hair from the blade and clipper body.
- Ensure the blade is completely dry before reattaching.
5.2 Lubricating the Blades
To maintain optimal performance and extend the lifespan of the blades, apply a few drops of the provided lubricating oil to the blades after cleaning or before each use.
- Apply a drop of oil to each side of the blade and one drop to the center.
- Turn on the clipper for a few seconds to distribute the oil evenly.
- Wipe off any excess oil.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clipper does not turn on | Low battery or no charge | Charge the clipper for 3 hours until the indicator light is solid white. |
| Clipper pulls hair | Blades are dull or not lubricated | Clean and lubricate the blades. If problem persists, blades may need replacement. |
| Reduced cutting performance | Hair buildup in blades, insufficient lubrication, or low battery | Clean and oil the blades. Ensure the clipper is fully charged. |
| Overheating | Prolonged use or dirty blades | Allow the clipper to cool down. Clean and lubricate the blades. The clipper has an anti-overheating feature. |
7. Specifications
| Feature | Specification |
|---|---|
| Product Name | Hair Trimmer |
| Model | Hummingbird |
| Blade Material | Stainless Steel |
| Motor Speed | 7100 rpm |
| Rated Power | 10W |
| Input | 5V/1A |
| Battery Capacity | 1500mAh Lithium Battery |
| Charging Time | 3 hours |
| Usage Time | Up to 120 minutes |
| Minimum Haircut Length | 0.5 - 1 mm |
| Length Adjustment Method | Change of nozzles (limit combs) |
| Noise Level | Less than 50dB |
| Power Type | Rechargeable (USB-B) |
| Product Size | 40.8 x 145 x 26 mm |
| Net Weight | 149.6g |
| Certifications | RoHs, CE, FCC |
8. User Tips
- Always ensure the clipper is fully charged before a long grooming session to avoid power interruptions.
- Regularly clean and oil the blades to maintain sharpness and prevent hair pulling.
- Experiment with different limit comb sizes to find your preferred hair length and style.
- For best results, use the clipper on clean, dry hair unless performing a wet haircut.
- Store the clipper in a dry place, ideally hanging it by its convenient bottom hook.
9. Warranty and Support
For any issues, questions, or warranty claims, please contact the seller or the official ENCHEN customer support. Keep your purchase receipt as proof of purchase.
