CYCLAMI A2 Mini Portable E-Pump User Manual

1. Introduction

The CYCLAMI A2 Mini Portable E-Pump is a compact and efficient electric air inflator designed for various applications, primarily bicycle tires (MTB, road bikes) and other small inflatables like sports balls. Its cordless design and portability make it an ideal companion for outdoor activities and daily use. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your E-Pump.

2. Safety Information

• Read all instructions before using the device.
• Keep out of reach of children.
• Do not operate the pump near flammable liquids or gases.
• Avoid prolonged operation to prevent overheating. Allow the device to cool down if it becomes excessively warm.
• Do not point the air nozzle at people or animals.
• Ensure the correct pressure is used for the item being inflated to prevent over-inflation and potential damage or injury.
• Use only the provided charging cable and a compatible QC charger for optimal performance and safety.
• Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.

3. Package Contents

Please check the package to ensure all items are present:

• 1 x CYCLAMI A2 E-Pump
• 1 x Silicone Cover
• 1 x Schrader Valve (SV) Adapter
• 1 x Presta Valve (FV) Adapter
• 1 x Ball Needle
• 1 x Inflatable Hose (for SV)
• 1 x Adapter (for FV)
• 1 x Type-C USB Charging Cable
• 1 x Fine Lanyard
• 1 x Velcro Straps
• 1 x Packing Box

4. Product Overview

Familiarize yourself with the components of your CYCLAMI A2 E-Pump:

• On/Off Button: Powers the device on/off and initiates inflation.
• Charging Indicator: Shows charging status and battery level.
• Air Nozzle: Connects to the valve of the item to be inflated.
• Type-C Charging Port: For connecting the charging cable.

The pump is compatible with both Schrader (SV) and Presta (FV) valves. An inflatable hose and an adapter are provided for versatile use.

5. Specifications

6. Setup

1. Charge the Pump: Before first use, fully charge the E-Pump. Refer to the 'Charging' section for details.
2. Attach Silicone Cover: For heat insulation and protection against scratches, place the provided silicone cover onto the pump.
3. Select and Attach Valve Adapter:
   • For Schrader Valves (AV): Use the inflatable hose (SV) directly with the pump's air nozzle.
   • For Presta Valves (FV): First, attach the FV adapter to the inflatable hose, then connect the hose to the pump's air nozzle. Ensure a secure connection.
   • For Ball Needles: Attach the ball needle to the appropriate valve adapter (usually SV) and then to the pump.
4. Connect to Item: Securely connect the chosen valve adapter/hose assembly to the valve stem of the tire or inflatable item.

7. Operating Instructions

1. Power On: Press the On/Off button to turn on the E-Pump. The charging indicator may light up.
2. Connect: Ensure the pump is securely connected to the item you wish to inflate via the appropriate valve adapter.
3. Start Inflation: Press the On/Off button again to begin inflation. The pump will start operating.
4. Monitor Pressure: The pump is designed for intelligent and precise inflation. Monitor the inflation process. For bicycle tires, it can inflate to 80 PSI in approximately 80 seconds.
5. Stop Inflation: Once the desired pressure is reached, press the On/Off button to stop the pump.
6. Disconnect: Carefully disconnect the pump from the valve stem.
7. Power Off: Press and hold the On/Off button to power off the device when not in use.

8. Charging

The CYCLAMI A2 E-Pump features fast charging capabilities via its Type-C port.

1. Connect the provided Type-C USB charging cable to the pump's charging port.
2. Connect the other end of the cable to a compatible QC (Quick Charge) charger (5V 1.5A recommended).
3. The charging indicator will show the charging status.
4. A full charge can be achieved in approximately 25 minutes with a QC charger.
5. Once fully charged, disconnect the charging cable.

9. Maintenance

• Cleaning: Wipe the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Storage: Store the pump in a cool, dry place away from direct sunlight and extreme temperatures.
• Silicone Cover: Always use the special silicone cover to protect the pump from scratches and provide effective heat insulation during operation.
• Battery Care: For optimal battery life, avoid completely draining the battery frequently. Charge the pump regularly, even if not in constant use.

10. Troubleshooting

• Pump not turning on: Ensure the battery is charged. If not, connect to a charger.
• Pump not inflating: Check if the valve adapter is securely attached to both the pump and the item's valve stem. Ensure the valve stem is not blocked.
• Slow inflation: Verify the battery is sufficiently charged. A low battery can affect performance. Ensure the air nozzle and adapters are clean and free of debris.
• Overheating: If the pump feels excessively hot, turn it off and allow it to cool down before resuming use. Ensure the silicone cover is in place for heat insulation.
• Charging indicator not working: Try a different Type-C cable or QC charger to rule out cable/charger issues. Ensure the cable is fully inserted.

11. User Tips

• The CYCLAMI A2 is versatile and can be used for inflating bicycle tires (MTB, road), footballs, and even electric scooter tires.
• On a full charge, the pump can inflate two 700*25C bicycle tires from 0 to 80 PSI. It can also inflate approximately 20 footballs or 4-5 electric scooter tires.
• While suitable for various inflatables, this pump is not designed for high-pressure air suspension systems.
• The compact 'Mini' design makes it easy to carry in a jersey pocket, backpack, or attached to your bike frame using the included Velcro straps.

12. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the product packaging. Keep your purchase receipt as proof of purchase.