JIKONG BD4A8S4P

Contents

JIKONG Smart BMS Instruction Manual

Model: BD4A8S4P (and other variants)

Your comprehensive guide to setting up and operating your JIKONG Smart Battery Management System.

1. Introduction

The JIKONG Smart BMS is an advanced Battery Management System designed to protect and optimize the performance of LiFePo4, Li-ion, and LTO battery packs. It features active balancing, real-time monitoring via a mobile application, and comprehensive protection mechanisms to ensure the longevity and safety of your battery system. This manual provides detailed instructions for installation, operation, and troubleshooting.

Three JIKONG Smart BMS units in different colors
JIKONG Smart BMS product lineup.

2. Key Features

  • Active Balance BMS: Balances cell voltage differences to improve battery performance and extend lifespan.
  • 24-Hour Automatic Balancing: Continuous detection and real-time automatic balancing.
  • High Balance Efficiency: Features 0A~2A balanced current with balance pressure difference accuracy reaching 0.01V.
  • Smart Management via BT APP: Easy to operate with real-time battery data monitoring, parameter modification, and balance switch control via Android and iOS systems.
  • Wide Compatibility: Supports battery packs with different string numbers, ranging from 3S to 24S.
  • Comprehensive Protection: Includes 6 major protection features: Overcharge Protection, Short Circuit Protection, Over Discharge Protection, Overcurrent Protection, ALL-IN Protection (for cable drop or poor contact), and Over Temperature Protection.
  • Versatile Battery Support: Compatible with Li-ion, LiFePo4, and LTO battery types.
  • Multiple Interfaces: Equipped with BT (Bluetooth), RS485, and optional CAN and Heating interfaces, along with an LCD display port.
Video: Overview of JIKONG Active Balance BMS features, including balancing and smart management.

3. Package Contents

Please check the package for the following items:

  • JIKONG Smart BMS Unit
  • Operating Manual
  • Pack Box
  • Screws (x4)
  • NTC Temperature Sensor (40cm)
  • Switch (50cm)
  • Balance Wires (70cm)
  • Optional CAN cable (25cm, may vary by model)
Contents of the JIKONG Smart BMS package, including the BMS unit, manual, wires, NTC, switch, and screws.
Typical package contents for a JIKONG Smart BMS.

4. Specifications

FeatureDescription
Brand Namesmart jikong bms
TypeLIFEPO4 Battery BMS
Handware or SmartSMART BMS
Balance FunctionActive Balanced BMS
Balance Current0.4A / 0.6A / 1A / 2A (varies by model)
Battery TypeLi-ion / LiFePo4 / LTO
Battery Strings3S-24S (varies by model)
Charge and Discharge PortCommon Port BMS
Charge/Discharge Current40A - 200A (Continuous, varies by model)
FunctionOvercharge Protection, Over Discharge Protection, Overcurrent Protection, Short Circuit Protection, BT/RS485/CAN/Heat
Usage ScenarioPower BMS, 3C Digital BMS
CertificationCE, FCC, RoHS
Dimensions (approx.)e.g., 121.5x93x17.6 mm (BD4A8S4P), 162x102x16.6 mm (BD6A20S10P), 153x136x17 mm (B1A8S10P)
Detailed specifications table for various JIKONG BMS models, showing parameters like balance method, current, voltage, and dimensions.
Detailed specifications for various JIKONG BMS models.

5. Setup

5.1. Wiring Diagram

Carefully follow the wiring diagram below to connect your JIKONG Smart BMS to your battery pack. Ensure all connections are secure and correct before proceeding.

Wiring diagram showing connections for the JIKONG BMS to a battery pack, motor, and charger.
General wiring diagram for JIKONG Smart BMS.
Detailed JIKONG BMS connection scheme showing balance wire connections for different string counts.
Detailed JIKONG BMS connection scheme.

5.2. Initial Connection Steps

  1. Connect the protection board and battery pack according to the provided wiring diagram. Ensure that the last 'B+' line of the cable is connected to the main positive pole of the battery.
  2. The total voltage of the battery pack must be greater than 20V (for default BMS) or 10V (for 4S BMS) before starting up.
  3. Use the display activation button or an additional switch to activate the BMS.

6. Operating Instructions

6.1. Mobile APP Connection

  1. Turn on GPS and Bluetooth on your mobile phone.
  2. Ensure your mobile Bluetooth is turned on.
  3. Open the JIKONG BMS APP.
  4. Click on the top left corner of the APP to search for devices.
  5. Click on the device name to connect. The default password is 1234.

6.2. Parameter Setting

  1. For the first start-up, parameters need to be set. Setting requires a password. The default parameter setting password is 123456.
  2. Simply set the number of units (battery strings) and battery type (Li-ion, LiFePo4, or LTO).
  3. Once the parameters are set, go back to the real-time status page. Check the battery status; if no error message is prompted, the operation is normal.
  4. On the real-time status page, blue indicates the highest voltage, and red indicates the lowest voltage.
Screenshot of the Smart BT APP showing real-time battery data, parameter modification, and balance switch control.
Smart BT APP interface for monitoring and control.
Mobile APP page display showing active balancing and various settings.
Mobile APP page display supporting active balancing.

7. Interface Function Description

  • Temperature Sensor Interface: All JIKONG BMS models are equipped with a temperature sensor interface.
  • RS485 Interface: All JIKONG BMS models are configured with an RS485 interface for communication.
  • LCD Interface: All JIKONG BMS models are equipped with an LCD interface for display.
  • CAN Interface: Only configurations with "CAN" in the model name include a CAN interface.
  • Heating Interface: Only configurations with "Heat" in the model name include a heating interface.
Close-up of BMS interfaces including CAN/RS485, GPS, LCD, and Heat Function ports.
BMS interface details.
BMS with NTC, RS485, Switch, and LCD connections.
BMS with NTC, RS485, Switch, and LCD connections.

8. Heating Function

8.1. Function Description

The heating function detects battery temperature and, combined with low-temperature protection during charging, controls the heating of the battery pack. This function is only available on BMS models with "Heat" in their name.

8.2. Heating Interface

The heating interface requires an external heating film or charger. The green cable connects to the heating film, and the red and black cables connect to the charger. The maximum heating power is 3A, and the maximum heating voltage is 100V.

8.3. Heating Conditions

  1. Heating activates when the battery temperature is lower than the low-temperature protection temperature set for charging.
  2. When connected to a heating film, the APP will activate heating, which will consume battery power.
  3. Heating through the charger is related to the protection board hardware and charger. Please confirm technical status before ordering.

9. Smart Energy Working Modes

The JIKONG Smart BMS features several working modes to optimize battery usage and longevity:

  • Storage Mode: In transportation, offline, or wireless transmission off mode, the BMS is in storage mode and does not consume battery pack current.
  • Normal Working Mode: When the charger is inserted in storage mode and off mode, the BMS will immediately return to normal working mode, and all protection, equalization, and communication functions will resume normal operation.
  • Standby Mode: When the battery pack is in a static state (no charge and discharge current) and no equilibrium current, the BMS will automatically enter standby state after the set time (1-30 days can be set).
  • Shutdown: To prevent the BMS from wasting power for a long time and damaging the battery pack, the BMS has an automatic shutdown voltage. The BMS automatically shuts down when a cell falls below the shutdown voltage.
Diagram illustrating the smart energy working mode switching of the JIKONG BMS.
Smart energy working mode switching diagram.

10. Six Security Protection Features

The JIKONG Smart BMS is equipped with six major protection features to ensure the safety and reliability of your battery system:

  • Overcharge Protection: Prevents over-charging, which can affect battery life.
  • Short Circuit Protection: Provides automatic protection when a short circuit occurs.
  • Over Discharge Protection: Prevents the battery from running out completely.
  • Overcurrent Protection: Prevents the current from exceeding the battery's safe range.
  • ALL-IN Protection: Protects against cable drop or poor contact.
  • Over Temperature Protection: Prevents the battery from overheating.
Diagram illustrating the six security protection features of the JIKONG BMS.
Six security protection features.

11. Troubleshooting (FAQ)

11.1. BMS Does Not Turn On

  • Ensure that the last 'B+' line of the cable has been correctly connected to the positive pole of the battery.
  • Start up after charging and ensure that the charger voltage is greater than 4V of the battery pack voltage.
  • Check whether the charger has voltage output.

11.2. Inaccurate Voltage Readings

  • Measure the actual total pressure of the battery pack with a multimeter.
  • Fill the actual total pressure into the "voltage calibration" setting on the parameter setting page in the APP.

11.3. Inaccurate Current Readings

  • The B- and P- terminals of the protection board are two 7AWG wires, both of which need to be connected in parallel. Otherwise, it will lead to current error.
  • Measure the actual current of the battery pack with a clamp meter.
  • Fill the actual current into the "current calibration" setting on the parameter setting page. A larger actual current generally leads to higher calibration accuracy.

11.4. Inaccurate Capacity Readings

  • An initial capacity estimated based on the monomer voltage when the protection board is powered on for the first time may be inaccurate.
  • After the protection board is discharged to the cut-off voltage and then fully charged, the capacity is calibrated. Ensure the charging process is not interrupted during calibration.

11.5. Designed String Number Inconsistent with Actual String Number

  • Check whether the "unit quantity" in the parameter setting is set correctly in the APP.
  • If there is no voltage in two or more strings in the middle, check whether the acquisition cable has fallen off or is improperly connected.
FAQ section with troubleshooting tips for common BMS issues.
Visual representation of common FAQ and troubleshooting steps.

12. User Tips

  • BMS Selection: When choosing a BMS, ensure it matches your battery pack's cell count (e.g., 4S, 8S) and desired continuous charge/discharge current. Consider your battery's capacity (Ah) to select an appropriate current rating for the BMS.
  • Voltage Verification: Always verify the total battery pack voltage and individual cell voltages with a multimeter before initial setup and after any changes to ensure correct operation and prevent damage.
  • Firmware Updates: Regularly check for APP and BMS firmware updates to benefit from improved features and bug fixes.

13. Support & Resources

For further assistance and detailed technical information, please refer to the following resources:


Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.