BUCKLOS Bicycle Taillight

Contents

BUCKLOS Bicycle Taillight LED USB Rechargeable Bike Rear Light User Manual

Model: Bicycle Taillight

1. Product Overview

The BUCKLOS Bicycle Taillight is a versatile, USB rechargeable LED light designed to enhance safety and visibility for cyclists. It can be used as a rear light, headlight, or helmet light, offering multiple light modes to suit various riding conditions.

Three BUCKLOS bicycle taillights in red, green, and white colors.
Figure 1: BUCKLOS Bicycle Taillights (Red, Green, White)
Four images showing the bicycle taillight in use at night, mounted on a bike and a rider's seatpost.
Figure 2: Taillight in various night riding scenarios

2. Safety Information

Warning! Failure to comply with the following safety precautions may result in personal injury, property damage, or product malfunction. Read and follow all instructions carefully before use.

  • Keep the product away from children under 14 years old to avoid choking hazards (for small parts), electric shock, or other injuries.
  • Do not touch the product with wet hands. Avoid exposure to water or other liquids.
  • Disconnect the power supply immediately in case of short circuit or overheating.
  • Do not use the product if it is damaged (e.g., cracked casing, frayed wires). Contact after-sales service for repair or replacement; unauthorized repair is prohibited.
  • Dispose of the product in accordance with EU WEEE Directive (2012/19/EU) and local waste recycling regulations. Do not discard it as household waste.
  • Do not modify, disassemble, or refit the product without authorization, as this will invalidate compliance certifications and cause potential safety hazards.
  • Do not use the product in extreme environments (e.g., high temperature, high humidity, flammable/explosive areas) beyond the specified range.

3. Package Contents

Before use, carefully unpack the product and check if all components are intact and free from damage. The package should contain:

  • BUCKLOS Bicycle Taillight (Red, White, or Green, depending on purchase)
  • Mounting Strap/Bracket
  • USB Charging Cable

4. Setup and Installation

4.1 Charging the Device

The taillight is USB rechargeable. Before first use, ensure the battery is fully charged.

  1. Connect the provided USB charging cable to the taillight's charging port.
  2. Plug the other end of the USB cable into a computer's USB port or any standard USB power adapter (not included).
  3. The light will indicate charging status (e.g., a specific LED color or pattern). Once fully charged, the indicator will change.
A red bicycle taillight connected via a USB cable to a laptop for charging.
Figure 3: USB Charging via Laptop
A USB charging cable with a micro-USB connector, used for charging the taillight.
Figure 4: USB Charging Cable

4.2 Mounting Options

The BUCKLOS taillight features universal mounting and can be attached to various parts of your bike or gear. It supports both horizontal and vertical orientations.

  1. **Attach the Mount:** Secure the rubber mounting strap/bracket to your desired location (e.g., seatpost, handlebar, helmet, backpack strap). Ensure it is tight and stable.
  2. **Slide the Light:** Align the taillight with the mount and slide it into place until it clicks securely. The quick-release button allows for easy attachment and detachment.
  3. **Adjust Orientation:** The light can be mounted horizontally or vertically. Choose the orientation that provides the best visibility.
Diagram showing universal mounting options for the taillight, including tail light, head light, and helmet light uses, with horizontal and vertical adjustments.
Figure 5: Universal Mounting and Multi-Use
Image showing the taillight's mounting options, including horizontal and vertical placement, and the quick release button.
Figure 6: Mounting Options and Quick Release
A red bicycle taillight mounted horizontally on a bike handlebar.
Figure 7: Horizontal Mounting Example
A red bicycle taillight mounted vertically on a bike seatpost.
Figure 8: Vertical Mounting Example

5. Operating Instructions

5.1 Power On/Off and Mode Selection

The taillight is operated using a single rubber switch button.

  1. **Power On:** Press and hold the rubber switch button for approximately 2 seconds to turn on the device.
  2. **Change Mode:** Once on, short press the button to cycle through the available light modes. The light offers 4 modes: Full Brightness, Half Brightness, Slow Flashing, and Fast Flashing.
  3. **Power Off:** Press and hold the button again for approximately 2 seconds to turn off the device.
Close-up of the red bicycle taillight showing the rubber switch button.
Figure 9: Rubber Switch Button
Image illustrating the four light mode options: Full Brightness, Half Brightness, Slow Flashing, and Fast Flashing.
Figure 10: 4 Light Mode Options

Video 1: Demonstration of light modes and button operation.

6. Maintenance

  • **Cleaning:** Wipe the light with a soft, damp cloth. Do not use abrasive cleaners or solvents.
  • **Storage:** When not in use for extended periods, turn off the light and store it in a dry, well-ventilated place, away from direct sunlight and strong magnetic fields.
  • **Battery Care:** To prolong battery life, avoid completely draining the battery frequently. Recharge the light regularly, especially if stored for a long time.
  • **Water Resistance:** The light has an IPX5 waterproof rating, meaning it is protected against low-pressure water jets from any direction. It is suitable for use in rain but should not be submerged in water.
A red bicycle taillight with water droplets, illustrating its waterproof feature.
Figure 11: IPX5 Waterproof Rating

7. Troubleshooting

  • **Light not turning on:**
    • Ensure the battery is charged. Connect to a USB power source and check the charging indicator.
    • Press and hold the power button for 2 seconds to ensure it's not just a short press.
  • **Light not charging:**
    • Check the USB cable for damage and ensure it's properly connected to both the light and the power source.
    • Try a different USB port or power adapter.
  • **Light modes not changing:**
    • Ensure the light is powered on. Short press the button to cycle modes.
  • **Light detaches from mount:**
    • Ensure the mounting strap is securely fastened and the light is properly clicked into the mount.

If the product is damaged or malfunctions, do not attempt to repair it yourself. Contact the manufacturer or authorized service center for assistance.

8. Specifications

FeatureSpecification
BrandBUCKLOS
TypeTail Light
Body MaterialPlastic (ABS+PC)
Power SupplyBattery (Polymer Lithium Battery)
Battery Capacity220 mA
Battery LifeUp to 5 hours
Lumen (Red Light)30
Lumen (White Light)45
Light Beads2835 patches
Light ColorsRed, White, Green (depending on model)
Light Modes4 (Full Brightness, Half Brightness, Slow Flashing, Fast Flashing)
Waterproof LevelIPX5
Dimensions (L x W x H)7 cm x 2 cm x 1.7 cm (2.75 in x 0.78 in x 0.67 in)
Net Weight30g
Mounting PlacementSeatpost (Universal)
Intelligent SensingNo
Image showing the dimensions of the taillight and a table of specifications including brand, material, weight, size, light colors, and modes.
Figure 12: Product Dimensions and Key Specifications

9. User Tips

  • **Visibility is Key:** Always use the brightest or flashing mode in low-light conditions or heavy traffic to maximize your visibility to others.
  • **Regular Charging:** For consistent performance, make it a habit to charge your taillight after every few rides, especially if you use it frequently.
  • **Mounting Versatility:** Experiment with different mounting locations (seatpost, helmet, backpack) to find what works best for your bike and riding style to ensure maximum visibility.
  • **Check Before Ride:** Always do a quick check before your ride to ensure the light is securely mounted and fully charged.

10. Compliance Markings

This product conforms to relevant EU regulatory requirements, indicated by the following markings:

  • **CE Marking:** Affixed in a visible, legible, and indelible manner, confirming compliance with applicable EU directives.
  • **RoHS 2.0 Directive (2011/65/EU, amended by (EU) 2015/863):** Restricts the use of certain hazardous substances in electrical and electronic equipment.
  • **REACH Regulation ((EC) No 1907/2006):** Addresses the production and use of chemical substances and their potential impacts on human health and the environment.
  • **EMC Directive (2014/30/EU):** Ensures that electrical and electronic equipment does not generate electromagnetic disturbances exceeding a level that allows radio and telecommunication equipment and other apparatus to operate as intended.

The CE Marking shall not be altered or removed without permission.

11. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the manufacturer directly:

  • **Manufacturer:** Fujian Quantu Trading Co., Ltd.
  • **Contact Email:** 737136476@qq.com

For a complete list of applicable harmonized standards, please contact the manufacturer or EU Authorized Representative.

A detailed user manual in PDF format is also available for download: User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.