1. Important Safety Information
Please read all instructions carefully before installation and use. Keep this manual for future reference.
- Electrical Safety: To reduce the risk of electric shock, ensure electricity is turned off at the circuit breaker or fuse box before beginning installation. All wiring must conform to national and local electrical codes. Electrical installation should be performed by a qualified, licensed electrician.
- WARNING: To reduce the risk of electric shock and fire, do not use this fan with any solid-state fan speed control device.
- Mounting: To reduce the risk of fire, electric shock, or personal injury, mount to an outlet box marked "Acceptable for Fan Support of 12 kg (26.46 lb) or less" and use the mounting screws provided with the outlet box. Most outlet boxes commonly used for lighting fixture support are not suitable for fan support and may need to be replaced. Due to the complexity of this fan's installation, a qualified and licensed electrician is highly recommended.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45 kg (99.12 lb). Use only UL listed outlet boxes marked FOR FAN SUPPORT.
- The fan must be mounted with a minimum distance of 7 feet (2.3 meters) from the blade's trailing edge to the floor. Avoid placing objects in the path of the blades.
- Personal Safety: To avoid personal injury and damage to the fan and other items, be careful when working around or cleaning the fan.
- Cleaning: Do not use water or detergents to clean the fan or fan blades. A dry dust cloth or a slightly damp cloth will be suitable for most cleaning.
- Wiring Connections: After making electrical connections, the spliced conductors should be turned upward and carefully pushed into the outlet box. The wires should be separated, with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- This fan is suitable for indoor use only.
2. Package Contents
Carefully unpack your fan and check the contents. You should have the following items:
- Motor Assembly
- Fan Blades (3x)
- Mounting Bracket
- Remote Control
- Light Kit
- Decorative Cover
- Hardware Pack (screws, wire nuts, etc.)

3. Tools Required
The following tools are required for installation:
- Phillips Head Screwdriver
- Flat Blade Screwdriver
- Adjustable Wrench
- Pliers
- Wire Strippers
- Electrical Tape
- Step Ladder
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | CY-Fan |
| Item Type | Ceiling Fans |
| Installation Method | Assembly |
| Blade Size | 42 inch (105cm) / 52 inch (132cm) |
| Power | 48W (Fan) / 30W (Motor) |
| Power Source | AC |
| Light Source | LED |
| Luminous Flux | 2000-82000 |
| Is Dimmable | Yes |
| Is Bulbs Included | Yes |
| Control Method | Remote Control |
| Switch Type | Remote Control |
| Number of Lights | 1 pcs |
| Body Material | ABS, aluminum |
| Weight (Product) | 5 KG |
| Package Dimensions (L x W x H) | 56cm x 27cm x 21cm |
| Package Weight | 3.982 KG |
| Certification | CE, CCC |
| Origin | Mainland China |
| Style | Modern Style |

5. Installation
5.1 Mounting Bracket Installation
To prevent personal injury and damage, ensure the mounting location allows for a blade clearance of 7.5 feet (2.3 meters) from the floor and 18 inches (15.72 centimeters) from any wall or obstruction.
For Concrete Ceilings:
- Mark the position for the ceiling fan.
- Drill two holes in the ceiling to install the ceiling bracket with two expansion screws provided.
- Secure the mounting bracket to the building structure with the provided expansion screws and tighten them.
For Wooden Ceilings:
- Mark the position for the ceiling fan.
- Secure the mounting bracket to the building structure with four wood screws provided.
Note: The hanger must be able to support a weight of 45 kg or more after installation.
5.2 Fan Assembly
- Install the Motor: Unscrew the four screws from the ceiling mounting bracket. Connect the motor housing to the bracket using these screws.
- Install the Remote Receiver: Connect the motor wires and receiver wires according to the corresponding colors. (Refer to the wiring diagram below).
- Install the Decorative Cover: Place the decorative cover over the motor, rotate it to the right, and secure it onto the mounting bracket.
- Install the Blades: Attach each fan blade to the motor using the blade lock screws. Ensure all three blades are securely fastened.
- Install the Light Kit: After securing the blades, install the lamp kit. Ensure the lamp kit is not installed in the opposite direction.
- Final Step: Rotate the fan body to the right to tighten it and check if it is loose. Complete the installation.
5.3 Electrical Connections
Perform electrical connections from the house wiring to the remote receiver and then to the fan motor and light, as shown below. Ensure all connections are secure and insulated.
| House Wiring | Remote Receiver | Fan Motor / Light |
|---|---|---|
| Black (Live) | Black | Black (Motor Wire) |
| White (Neutral) | White | White (Motor Wire) |
| Ground (Green/Bare Copper) | Green/Yellow | Green/Yellow (Ground) |
| Blue (Light Live) | Blue | Blue (Light Wire) |
| Red (Fan Live) | Red | Red (Motor Wire) |
Note: The remote receiver must match the same control code as the remote control.
6. Operation
The IRALAN Ceiling Fan with LED Light is controlled via the included remote control. All operations, including light settings, fan speeds, and fan direction, can be managed from the remote.
6.1 Remote Control Functions
- Power On/Off: Turn the fan and light on or off.
- Fan Speed Control: Adjust between 6 different wind speeds for optimal comfort.
- Light Control:
- Color Temperature Adjustment: Cycle through 3 color temperatures: Warm Light (3000K), Natural Light (4500K), and Cold Light (6000K).
- Dimming: Adjust light brightness from 5% to 100% (6 levels).
- Fan Direction (Summer/Winter Mode): Switch between forward (downward airflow for cooling in summer) and reverse (upward airflow to circulate warm air in winter) modes with a single button.
- Timer Function: Set the fan to turn off automatically after a set period (e.g., 1H, 2H, 4H).


7. Maintenance
Regular maintenance helps ensure the longevity and optimal performance of your ceiling fan.
- Cleaning: To clean the fan and blades, use a dry dust cloth. For more stubborn dirt, a slightly damp cloth can be used. Do NOT use water or harsh detergents directly on the fan or its components.
- Blade Balance: Periodically check the fan blades for any signs of wobble. If wobbling occurs, ensure all blade screws are tight.
- General Inspection: Annually inspect all connections and mounting hardware to ensure they remain secure.
8. Troubleshooting
If you encounter any issues with your IRALAN Ceiling Fan, refer to the following troubleshooting guide:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not start | 1. Blown fuse or tripped circuit breaker. 2. Loose wiring connections. 3. Remote control issue (no response, beeping). | 1. Check and replace fuses or reset circuit breakers. 2. Ensure main power is OFF. Check all line wire connections to the fan and switch wire connections in the switch housing. Remove and reinstall if necessary. 3. If the remote control does not respond and the fan beeps, do not press the remote multiple times. Immediately turn off the power and check if the wire between the motor and receiver is loose. Remove and reinstall the receiver if needed. |
| Fan is noisy | 1. Loose motor housing screws. 2. Loose blade bracket screws. 3. Wire nut connections rubbing. 4. New fan "run-in" period. 5. Loose light kit screws or bulb. 6. Motor sensitivity to solid-state variable speed controls. 7. Canopy touching the ceiling. | 1. Ensure all motor housing screws are tightly secured. 2. Ensure screws fastening the blade bracket to the motor hub are tightly secured. 3. Ensure main power is OFF. Check that wire nut connections do not rub against each other or the interior wall of the switch housing. 4. Allow a 24-hour "run-in" period. Most noises associated with a new fan disappear during this time. 5. If using an optional light kit, ensure screws securing the glass are tight. Check that the bulb is secure. 6. If you have installed a solid-state variable speed control, choose and install another type of control. 7. Ensure the top part of the canopy is a short distance from the ceiling. It should not touch the ceiling. 8. If the above methods do not resolve the problem, please contact the manufacturer. |
9. User Tips
- Remote Control Batteries: If your remote control is not working, first check if the batteries are correctly inserted and have sufficient charge. Replace them if necessary.
- Light Color Memory: The fan's light typically remembers the last used color temperature and brightness setting when turned off and on again.
- Quiet Operation: The IRALAN fan features an ultra-quiet DC motor, designed to operate at low noise levels (e.g., 35dB whisper, 46dB chatting). If you experience unusual noise, refer to the troubleshooting section.
- Power Supply: This fan is designed for AC power. Please check your local voltage requirements (e.g., 110V or 220V) to ensure compatibility.
10. Warranty & Support
This IRALAN Ceiling Fan comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.
For detailed warranty terms, technical support, or replacement parts, please refer to the official user manual PDF available at: User Manual (PDF).
If you require further assistance, please contact your retailer or the manufacturer's customer service.