ROMOSS PMT60

Contents

ROMOSS PMT60 60000mAh 100W Portable Power Bank User Manual

Model: PMT60 | Brand: ROMOSS

1. Introduction

Thank you for choosing the ROMOSS PMT60 60000mAh 100W Portable Power Bank. This high-capacity power bank is designed to provide reliable and fast charging for a wide range of devices, including laptops, tablets, and smartphones. Featuring a durable LiFePO4 battery and multiple output ports, it's an ideal companion for outdoor activities, emergencies, and daily use. This manual provides essential information on how to safely and effectively use and maintain your power bank.

2. Important Safety Information

Please read all safety instructions carefully before using this product. Failure to follow these instructions may result in electric shock, fire, or personal injury.

  • Do not expose the power bank to extreme temperatures (above 60°C/140°F or below 0°C/32°F), direct sunlight, or high humidity.
  • Do not disassemble, repair, or modify the power bank.
  • Keep the power bank away from water and other liquids.
  • Do not drop, puncture, or apply strong impact to the power bank.
  • Keep out of reach of children.
  • Use only certified charging cables and adapters.
  • If the power bank swells, emits an odor, or becomes hot during use or charging, discontinue use immediately.
  • Dispose of the power bank according to local regulations.

The ROMOSS PMT60 is equipped with 10-layer protection features, including over-recharge, over-current, reset, over-charge, over-voltage, over-wattage, short-circuit, and battery protection, ensuring well-rounded safety. It is certified with CE, FCC, and RoHS standards.

Image showing 10-layer protection features and safety certifications CE, FCC, RoHS

Image: Diagram illustrating the 10-layer protection system and international safety certifications (CE, FCC, RoHS).

3. Package Contents

Please check the package for the following items:

  • 1 x ROMOSS PMT60 Portable Power Bank
  • 1 x User Manual
  • 1 x Charging Cable

4. Product Overview

The ROMOSS PMT60 features a robust design with multiple ports and an integrated LED display and light. Below is an overview of its main components:

Close-up view of the ROMOSS PMT60 power bank's ports and control buttons

Image: Close-up of the power bank's top panel showing input/output ports, LED display, light switch, and power button.

  • USB A1 Output: 22.5W (Max)
  • USB A2 Output: 22.5W (Max)
  • Type-C1 Input & Output: 100W (Max)
  • Type-C2 Input & Output: 100W (Max)
  • LED Display: Shows battery percentage.
  • Light Switch: Activates the LED lamp.
  • Power Button: Turns the device on/off and controls low-current mode.
  • Portable Handle: For easy carrying.

5. Specifications

Detailed technical specifications for the ROMOSS PMT60 Power Bank:

FeatureSpecification
Product NameROMOSS EZCarry Max-PMT60 60000mAh 100W Portable Power Bank
ModelPMT60
Battery TypeRechargeable LiFePO4 Battery
Capacity60000mAh
Rated Capacity34000mAh (5V/3A)
Rated Power192 Wh
Max Output100W
Input InterfaceMicro USB, USB Type-C (2 ports)
Output InterfaceUSB-A (2 ports), USB Type-C (2 ports)
USB-A Output Power22.5W Max (each port)
Type-C Output Power100W Max (each port)
Input/Output (Type-C1/C2)5V=3A or 9V=3A or 12V=3A or 15V=3A or 20V=5A
Output (Single Port USB-A)5V=3A or 9V=2A or 10V=2.25A or 12V=1.5A
Charging Port (Type-C1+Type-C2)Input: 65W; Output: 3A
Charging Port (Type-C1+USB)Output: 65W+22.5W
Charging Port (Type-C+Type-C2)Output: 65W+15W
Support Quick Charge TechnologyTwo-way Quick Charge
Shell MaterialPlastic
FeaturesWith Flashlight, Digital Display, With LED Lamp
Dimensions (L×W×H)190 × 94.9 × 75.3 mm (7.5 × 3.7 × 2.9 in)
Weight~1670g / 58.9 oz
CertificationsRoHS, CE, FCC

Note: All data are obtained from ROMOSS Laboratory tests; actual results may vary.

Detailed specifications table for ROMOSS PMT60 power bank

Image: Comprehensive specifications including product name, model, battery type, capacity, input/output details, and physical dimensions.

6. Initial Setup and Activation

To ensure optimal performance and battery activation, please follow these steps upon receiving your power bank:

  1. Initial Charge: Fully recharge the power bank to 100% using a compatible 100W fast charger and cable.
  2. Full Discharge: Consume all the power of the fully charged power bank until it is completely depleted.
  3. Repeat Activation: Repeat steps 1 and 2 for 2 to 3 cycles. This process activates the power bank's battery for long-term optimal use.

This activation process is recommended for all 40000mAh and 60000mAh high-capacity ROMOSS power banks.

Important notice for initial power bank activation

Image: Notice detailing the initial activation steps for the power bank.

7. Operating Instructions

7.1 Charging the Power Bank

To charge your ROMOSS PMT60, connect a compatible 100W fast charger to either of the Type-C input ports. The LED display will show the charging progress. A full charge takes approximately 4.5 hours with a 100W fast charger.

ROMOSS PMT60 power bank being fast charged

Image: The power bank being recharged, highlighting its 100W dual-way fast charge capability.

7.2 Charging Your Devices

Connect your device to any of the available output ports (USB-A or Type-C) using a suitable charging cable. The power bank will automatically begin charging. It supports charging up to 4 devices simultaneously.

ROMOSS PMT60 charging four devices simultaneously

Image: The power bank connected to and charging four different devices concurrently.

The PMT60 can deliver up to 100W output, capable of charging high-demand devices like laptops (e.g., MacBook Pro 14" (M1) to 53% in 30 minutes) and smartphones (e.g., iPhone 14 Pro Max to 60% in 30 minutes).

ROMOSS PMT60 charging a laptop and a smartphone

Image: The power bank charging a MacBook Pro and an iPhone, demonstrating its 100W output capability.

7.3 Low-Current Mode

For charging low-current devices such as Bluetooth earphones, smartwatches, or mini fans, activate the Low-Current Mode to prevent overcharging and optimize battery health for these smaller gadgets.

  • To Enter Low-Current Mode: Double press the Power Button.
  • To Exit Low-Current Mode: Slightly press the Power Button.
ROMOSS PMT60 in low-current mode charging small devices

Image: The power bank charging a mini fan, speaker, and Bluetooth earphone in low-current mode.

7.4 LED Lamp Operation

The integrated LED lamp provides illumination for various situations, such as power outages, study nights, or camping. It offers three brightness levels:

  • To Turn On/Cycle Brightness: Press the Light Switch button. Each press cycles through Low, Medium, and High brightness levels.
  • To Turn Off: Press and hold the Light Switch button for 2 seconds.
ROMOSS PMT60 LED lamp with three brightness levels

Image: The power bank's LED lamp demonstrating its three accessible brightness levels (Low, Medium, High).

8. Maintenance

Proper care will extend the lifespan of your ROMOSS PMT60 Power Bank:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the power bank. Do not use harsh chemicals or abrasive materials.
  • Storage: Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures. If storing for extended periods, charge it to about 50-75% every three months to maintain battery health.
  • Avoid Over-Discharge/Over-Charge: While the power bank has built-in protections, it's best practice to avoid letting it completely drain or remain at 100% charge for very long periods when not in use.

9. Troubleshooting

If you encounter issues with your power bank, refer to the following common problems and solutions:

  • Power bank not charging: Ensure the charging cable and adapter are working correctly and are securely connected. Use a 100W compatible charger for optimal charging speed.
  • Device not charging from power bank: Check if the power bank has sufficient charge. Ensure the charging cable is properly connected to both the power bank and your device. Try a different port or cable.
  • Fast charging not working: If multiple devices are charged simultaneously, the fast-charging function may be disabled. Disconnect other devices. Ensure your device and cable support fast charging protocols compatible with the PMT60.
  • Power bank overheating: The PMT60 features smart temperature control. If it feels excessively hot, disconnect all devices and allow it to cool down. If overheating persists, discontinue use and contact support.
  • LED lamp not working: Ensure the power bank is turned on. Press and hold the light button for 2 seconds to turn it off, then press it again to cycle through brightness levels.

10. User Tips

Here are some helpful tips for getting the most out of your ROMOSS PMT60:

  • Initial Activation is Key: Don't skip the initial charge/discharge cycles mentioned in Section 6. This is crucial for the long-term health of the LiFePO4 battery.
  • Check Device Compatibility: While the PMT60 supports various fast charging protocols, always ensure your device and charging cable are compatible to achieve optimal charging speeds.
  • Utilize Low-Current Mode: For small electronics like earbuds or smartwatches, use the low-current mode to provide a safer and more efficient charge.
  • Portability: Despite its large capacity, the PMT60 is designed for portability. Use the integrated handle for easy transport during outdoor activities.

11. Frequently Asked Questions (FAQ)

Q: What are the charging protocols supported by this power bank?
A: The ROMOSS PMT60 supports two-way quick charge and various fast charging protocols via its USB-A and Type-C ports, delivering up to 100W. Specific protocols include PD (Power Delivery) and QC (Quick Charge) standards, among others, to ensure broad compatibility with modern devices.
Q: How long does it take to fully charge the power bank?
A: When using a compatible 100W fast charger and cable, the PMT60 can be fully recharged in approximately 4.5 hours.
Q: Can I charge multiple devices simultaneously?
A: Yes, the PMT60 features 2 input and 4 output ports, allowing you to charge up to 4 devices concurrently. Note that fast charging may be disabled when multiple devices are connected.
Q: Does the power bank have a flashlight?
A: Yes, it includes an integrated LED lamp with three adjustable brightness levels for emergency illumination or general lighting.
Q: What is Low-Current Mode for?
A: Low-Current Mode is designed for safely charging small, low-power devices like Bluetooth headphones, smartwatches, or fitness trackers, preventing potential overcurrent issues and optimizing their battery life.

12. Warranty and Support

12.1 Warranty Information

ROMOSS provides 12-months free maintenance for this product. During the warranty period, if any part requires replacement due to manufacturing defects, the buyer should return the product in its original condition. The buyer is responsible for shipping costs for returns. If any part needs to be replaced, the buyer will also be responsible for the costs of the replacement parts.

Before returning any items, please confirm the return address and the logistics method with the seller. Once the item is given to the logistics company, please provide the tracking number. Upon receipt of the returned items, ROMOSS will proceed with repair or exchange as soon as possible.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.