HIENA HI-301

Contents

HIENA HI-301 Electric Razor User Manual

Model: HI-301 | Brand: HIENA

1. Introduction

Thank you for choosing the HIENA HI-301 Electric Razor. This manual provides essential information for the safe and efficient use, maintenance, and care of your new electric shaver. Please read it thoroughly before first use and keep it for future reference.

2. Safety Information

WARNING: To prevent electrical failure, do not wash the main body of the product directly with water. Do not place this product in a hot or humid environment.

  • This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
  • Children shall not play with the appliance.
  • Cleaning and user maintenance shall not be made by children without supervision.
  • Ensure the charger is not damp during charging.

3. Package Contents

Please check the package for the following items:

  • HIENA HI-301 Electric Razor (Host)
  • USB Charging Cable
  • Spare Cutter Head
  • Cleaning Brush
HIENA HI-301 Electric Razor and accessories
Image: HIENA HI-301 Electric Razor with included USB charging cable, cleaning brush, and spare cutter head.

4. Specifications

FeatureSpecification
BrandHIENA
Model NumberHI-301 (also HYN-301)
Item TypeElectric Shaver
Blade MaterialStainless Steel
Cutter Net TypeReciprocating 2 cutter net (Foil Knife Net)
FunctionsWet shave, Dry shaving, Washing cutter head under water, Fast Charging
Power TypeRechargeable/Electric Both Work
Voltage CompatibilityGlobal Universal (100-240V)
Charging Input5V-1A (USB)
Battery Capacity600mAh
Charging TimeApprox. 2 hours (initial charge may be longer)
Usage TimeUp to 60 minutes
Host Power5W
Net Weight70g
Product Size5 x 9 cm
CertificationsCE, FCC, RoHS, UKCA
Product parameters table for Hiena HI-301 Electric Razor
Image: Detailed product parameters including brand, model, and dimensions.

5. Setup

5.1 Initial Charging

  1. Upon receiving the product, please charge the machine for approximately 2 hours. For the very first use, it is recommended to charge for more than twelve hours to optimize battery life.
  2. Insert the provided USB charging cable into your own 5V-1A power adapter (Note: The power adapter is not included; you must provide your own 5V-1A adapter).
  3. Connect the charging cable to the charging port on the razor.
  4. The charging indicator light will illuminate, indicating that charging has begun. Ensure the charger and razor are not damp.
Hiena HI-301 Electric Razor charging port and battery life details
Image: Close-up of the Type-C charging port and battery endurance information.
Hiena HI-301 Electric Razor battery indicators
Image: Visual representation of battery charging (8 hours) and usage (45 minutes).

6. Operating Instructions

6.1 Power On/Off

To start the electric razor, simply press the power switch button located on the side of the device. Press the button again to turn it off.

Hiena HI-301 Electric Razor one-button operation
Image: Diagram illustrating the one-button operation for starting the shaver.

6.2 Shaving

The HIENA HI-301 supports both wet and dry shaving. For a smooth shave, gently glide the razor across your skin. The reciprocating blades and floating double-knife design adapt to facial contours for efficient hair removal.

Man using Hiena HI-301 Electric Razor
Image: A man using the Hiena HI-301 Electric Razor for shaving.
Before and after shave comparison with Hiena HI-301 Electric Razor
Image: Before and after use comparison, showing a clean shave.

7. Cleaning and Maintenance

Proper cleaning and maintenance will ensure the longevity and optimal performance of your razor.

  1. After Each Use: Turn off the power supply.
  2. Cutter Head Cleaning: Remove the cutter head from the razor. Use the small cleaning brush to sweep away any hair clippings along the direction of the blade. You can then rinse the cutter head under running water. Ensure it is completely dry after cleaning to prevent rust.
  3. Lubrication: After the cutter head is completely dry, apply a few drops of lubricating oil (not included) onto the blade. The cutter head should be replaced regularly for best performance.
  4. Main Body Cleaning: Use the small brush to clean any broken hair on the motor head of the fuselage. Do NOT flush the motor head or the main body of the razor directly with water to prevent water from entering the fuselage and causing electrical failure. It is best to wipe the fuselage with a neutral lotion or a damp cloth, then dry naturally.
  5. Storage: Do not place this product in a hot or humid environment.
Hiena HI-301 Electric Razor detachable cutter head
Image: Detachable cutter head for easy disassembly and cleaning.
Hiena HI-301 Electric Razor cutter head being rinsed
Image: Illustrates rinsing the cutter head under water for easy cleaning.

8. Troubleshooting

If you encounter any issues with your HIENA HI-301 Electric Razor, please refer to the following common solutions:

  • Razor not turning on or low power: Ensure the razor is fully charged. If the battery is low and the razor cannot be started, it can often be used at least once after charging for 5 minutes.
  • Poor shaving performance: The cutter head may need cleaning or replacement. Ensure blades are lubricated after cleaning.
  • Electrical malfunction: If you suspect an electrical issue, immediately stop using the device. Do not attempt to repair it yourself. Refer to the warranty information for support.

9. User Tips

  • For optimal battery health, fully charge the razor before storing it for an extended period.
  • If the razor is not used for a long time, charge it periodically to maintain battery performance.
  • Always ensure the razor is dry before charging to prevent damage.
  • The compact and portable design makes it an ideal travel companion.
Hiena HI-301 Electric Razor as a travel companion
Image: The Hiena HI-301 Electric Razor, ideal for business and travel.

10. Warranty and Support

10.1 Product Warranty Matters

  • The product is transported by air and does not contain lubricating oil due to liquid restrictions.
  • If the product is photographed under different lights, there may be a slight visual error of 0.1mm-0.5mm.
  • The product contains a lithium battery (18650 series). If the battery is damaged during transportation, it needs to be fully charged before using the product.
  • In order to maintain the service life of the battery, it must be fully charged before putting it away. Under normal use, it must be discharged and recharged after a period of time.
  • If it is not used for a long time, it needs to be charged every once in a while.

10.2 Additional Resources

For a complete user manual in multiple languages, including English, Chinese, Spanish, German, French, Japanese, Korean, Italian, Arabic, Polish, Czech, Portuguese, Danish, Dutch, Swedish, Greek, Hungarian, Finnish, Romanian, Lithuanian, Turkish, Russian, Ukrainian, and Norwegian, please refer to the official PDF document:

View User Manual (PDF)

© 2023 HIENA. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.