Introduction
Thank you for choosing AUXITO D3S LED Headlights. This manual provides essential information for the safe and effective use of your new LED headlight bulbs. These high-performance bulbs offer superior brightness, efficient cooling, and a long lifespan, designed for a plug-and-play installation experience.
Product Information
Product Name
AUXITO Car LED Headlight
Model
H4 9003 / H7 / H8 H9 H11 H16(JP) / 9005 HB3 / 9006 HB4/9012 HIR2 / 9007 HB5 / 9008 H13
Batch/Serial Number
AUX0001
Safety & Warnings
Choking Hazard
- Small parts. Not for Children under 3 years.
- Pièces de petites dimensions. Ne convient pas aux enfants de moins de 3 ans.
- Piezas pequeñas. No apto para niños menores de 3 años.
- Kleine Teile. Nicht für Kinder unter 3 Jahren.
- Piccole parti. Non adatto ai bambini sotto i 3 anni.
- Małe części. Nieprzeznaczone dla dzieci w wieku poniżej 3 lat.
Product Specifications
| Specification | Detail |
|---|---|
| LED Type | LED |
| Socket | D1S, D2S, D3S, D4S |
| Voltage | DC 12-18V (for 12V cars only) |
| Power | 120W±10%/Pair High Power |
| Light Source | LED |
| Light Temperature | 6000K Cool White |
| Waterproof Rate | IP67 |
| Working Lifetime | 50,000hrs |
| Working Temperature | -40°F to +176°F |
| Housing Material | Aviation Aluminum |
| Cooling System | Aluminum + Fan Cooling (12000RPM) |
| Application | HID modification for D1S or D3S models only |
| Certification | CE |

IP67 Waterproof rating, showing the bulb's resistance to water.

Diagram illustrating the efficient cooling system components: 12,000RPM Turbo Fan, Vacuum Heat Pipe, Fin Heat Sink, and Aluminum Housing.
Package Contents
Your AUXITO LED Headlights package includes:
- 2 x LED Light Bulbs
- 1 x Product Manual
- 1 x Pair of Gloves
Setup & Installation
The AUXITO LED Headlights are designed for a 1:1 mini design, making them a perfect replacement for stock HID bulbs and allowing for easy installation. Installation typically takes around 10 minutes.
General Installation Steps (for H11, H8, H9, 9008, H13, 9005, HB3, 9006, HB4, 9012, HIR2, H10, 9145, 9140)
- Remove the original bulb:
- Remove the dust cover (if present).
- Disconnect the electrical plugs.
- Turn the original bulb counter-clockwise and carefully remove it from the light housing.
- Insert the LED bulb:
- Line up the tab parts of the LED bulb with the groove sections of the light housing.
- Insert the LED bulb into the housing.
- Secure the LED bulb:
- While gently pressing down the LED bulb, turn it clockwise until it locks securely in place.
- Connect the plug:
- Connect the electrical plug to the LED bulb.
- Finalize:
- Perform a power test to ensure the light functions correctly.
- Replace the dust cover (if present).
Installation Steps for 9004(HB1)/9007(HB5)
- Remove the original bulb:
- Remove the dust cover (if present).
- Disconnect the plug.
- Rotate the original bulb holder counter-clockwise and remove it.
- Remove the original bulb.
- Insert the LED bulb.
- Secure the LED bulb:
- Insert the vehicle's original light holder into the light housing, rotate clockwise and lock it in place.
- Connect the plug.
- Finalize:
- Perform a power test.
- Put the dust cover back (if present).
Installation Steps for 9003(H4)
- Remove the original bulb:
- Remove the dust cover (if your vehicle has one).
- Disconnect the plug.
- Press down and release the buckle.
- Remove the original bulb.
- Insert the LED bulb:
- Line up the tab parts of the LED bulb with the groove sections of the light housing, then insert the LED bulb.
- Secure the LED bulb:
- Put the buckle back to secure the bulb.
- Connect the plug.
- Finalize:
- Perform a power test.
- Put the dust cover back (if present).

Visual guide for the 1:1 Mini Design and the three-step easy installation process.
Official product video demonstrating the features and installation of AUXITO D3S LED Bulbs, including low and high beam performance.
Note: To avoid errors, please ensure that the installation of both LED bulbs is completed before turning on the car.
Operating Instructions
Once installed, the AUXITO LED Headlights operate like standard vehicle headlights. Turn on your vehicle's lights to activate them. The bulbs provide both low beam and high beam functionality, offering a clear and focused light output.

Comparison of beam patterns, highlighting the perfect beam of AUXITO for safe driving with no blinding oncoming vehicles, no dark spots, and no shadow.

Visual comparison showing AUXITO LED bulbs are 500% brighter than stock xenon bulbs, enhancing night visibility.
Maintenance
To ensure optimal performance and longevity of your AUXITO LED Headlights, follow these simple maintenance guidelines:
- Cleaning: Keep the headlight lenses clean from dirt, dust, and debris for maximum light output. Use a soft cloth and appropriate cleaning solution.
- Inspection: Periodically inspect the bulbs for any signs of damage, loose connections, or wear.
- Cooling System: Ensure the area around the cooling fan and heat sink is free from obstructions and debris to maintain efficient heat dissipation. A clear cooling system is crucial for the bulb's lifespan.
Troubleshooting
If you encounter any issues with your AUXITO LED Headlights, please refer to the following common problems and solutions:
Flickering/Error Warning
For some sensitive vehicles (e.g., Jeep, Chrysler, Dodge Ram, GMC, Ford), changing to LED bulbs might cause flickering or error warnings. This is often due to the vehicle's Canbus system. Please contact us for proper decoders/resistors to resolve this issue.
No Light
- Check to ensure all wires are connected properly and fuses are functioning correctly.
- If only one bulb works, swap the left and right bulbs to confirm if the issue is a Canbus problem or a defective bulb.
Light is Dim
Check to make sure the bulbs are locked securely into place and that the LED chips are clean and intact.
Conditions Beyond Warranty Scope
- Canbus Problem: Vehicles equipped with a Canbus system may experience issues like light flickering or error warnings. While decoders can often resolve this, if they don't work, you may return for a full refund.
- Installation Problem: Some vehicles may have limited installation space, making it difficult to install the bulbs.
- Natural Disaster: Damages caused by irresistible natural disasters (e.g., earthquake, flood) are not covered.
Warranty & Support
This product is backed by a 1-year warranty from the date of purchase.
Warranty Terms
- This Warranty covers defects resulting from defective parts, materials, or manufacturing, if such defects are revealed during the period of 12 months since the date of purchase.
- The warranty covers only the products delivered according to valid online orders, but not their installation.
- The product is considered defective if it fails to perform the functions described in the above specification or exceeds the average nominal failure rate.
- The warranty does not cover the normal reduction of light output and the shift of the light color temperature during the lifespan of the LED chips.
- The warranty does not cover damage due to negligence, misuse, or improper installation.
Warranty Claims
To file a warranty claim, if you believe you are experiencing defective products, please contact us through AliExpress message. The warranty services will be provided promptly upon meeting the following conditions:
- Cease the use of defective products and report the technical problems to us.
- Provide the proof of purchase that matches the order number, product serial number, or other numbers for product identification and date of purchase.
- Photo or video of defective products, with at least one frame where the product item and its intact serial number are all captured.
Once a warranty claim is validated, we will send you a replacement, or make a partial or full refund according to the severity of defects. We reserve the right to charge the cost for delivering a replacement.
Please contact our customer service team for further assistance.

Detailed warranty terms and claims process.
Manufacturer & EU Representative Information
Manufacturer: SHENZHEN TUYAO AUTO ACCESSORIES CO.,LTD
EU Authorized Representative: APEX CE SPECIALISTS LIMITED
Address: Grafenberger Allee 277, 40237 Düsseldorf, DE
Contact: Wolle Yan
Email: Info@apex-ce.com
Tel: +49 21312066043
User Tips
- Brightness: Users report these LED bulbs are significantly brighter than old xenon bulbs, improving night visibility.
- Installation Complexity: For some car models (e.g., Skoda Superb MK3), accessing headlights might require removing wheels and wheel arch liners. Be prepared for potentially more involved installation than a simple bulb swap.
- Beam Pattern: The bulbs provide a good shadow cutting line, often better than discharge lamps, ensuring a focused beam without glare.
- Included Accessories: The package includes gloves, which can be helpful during installation.
- Compatibility Note: Some users have reported that the radiator size might be too large for certain car models like Nissan or Renault. Always verify fitment before purchase.
- Xenon Projector Upgrade: For maximum improvement, some users have replaced xenon projectors in addition to the bulbs.
Compliance Information
This product complies with relevant European directives and standards.
Certifications: CE
Environmental Compliance:
This symbol indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
