1. Introduction
1.1 Product Overview
The LASER TREE Laser Module series offers a range of high-power diode laser modules designed for engraving and cutting various materials. These modules feature advanced technologies such as beam compression, integrated air assist, and intelligent temperature monitoring to ensure stable performance, precision, and extended lifespan. This manual provides essential information for the safe and effective use of your LASER TREE laser module.
1.2 Key Features
- High Optical Power: Available in various optical power outputs (10W, 20W, 30W, 40W, 60W) using multi-beam compression technology.
- Integrated Air Assist: Built-in air assist system to achieve clean-cut edges and improve cutting performance.
- Dual-Fan Cooling System: Ensures excellent heat dissipation, maintaining stable operation and prolonging module life.
- Temperature Display & Alarm: Real-time temperature monitoring with an alarm function for overheating protection.
- Fixed Focus Lever: Designed for quick and easy focus adjustment for different engraving and cutting requirements.
- Red Crosshair Positioning: Provides precise positioning for engraving and secondary cutting tasks.
- Wide Compatibility: Designed for compatibility with various DIY laser engraving machines (e.g., Z*aitu, O*tur, Tw* Trees, S*culpful9, Xtool, A*omstack).
- Easy Maintenance: Features an easy-to-change protection window and replaceable lenses for prolonged performance.
1.3 Product Video
An overview of the LASER TREE K30 module, demonstrating its features and capabilities.
2. Safety Information
- Laser Radiation Hazard: Laser can damage a person's skin. Do not expose your skin directly to the laser beam.
- Eye Protection: Always wear laser goggles to protect your eyes when operating the laser module.
- Air Pump Usage: Ensure the air pump is turned on before starting any cutting operation. Failure to do so may result in smoke contaminating the lens, reducing performance.
- Hot Plugging: This laser module does not support hot plugging. Connecting or disconnecting the module while the power is on may cause damage to the laser module.
- Over-temperature Alarm: The module is equipped with an over-temperature alarm. If the working temperature exceeds 55°C, an alarm will sound, indicating that the laser head needs to stop working to prevent damage and prolong its lifespan.
3. Package Contents
The standard configuration for the LT-80W-AA-PRO module typically includes the following components:
- Laser Module (LT-80W-AA-PRO)
- Cooling Fan (Built-in)
- Built-in Driver Board
- Focus Fixing Plates (3mm, 4mm, 5mm)
- Driver Adapter (P-DA-01)
- 3 Pin Input Cable
- Replaceable Protective Lens
- 1.5mm L-wrench
- Air Nozzle
- Air Inlet Port
4. Specifications
4.1 General Specifications (LT-80W-AA-PRO)
| Attribute | Value |
|---|---|
| Brand Name | Laser Tree |
| Model Number | LASER TREE Laser Module |
| Optical Power | 10W (±1W) |
| Effect Output Power | 80W |
| Wavelength | 450nm (±10nm) |
| Electric Power | 12V 3.2A (3A-3.5A); 24V 1.7A (1.5A-2A) |
| Input | DC 12V 3A / DC 24V 1.5A |
| Focus Length | 45mm |
| Power Adjustable | TTL/PWM |
| PWM Modulation | 0/3-12V, 0-5kHz |
| Air Assistance | Built-in airway |
| Fan Speed | 10000rpm |
| Operating Temperature | 0-60°C |
| Interface | XH2.54-3P Socket |
| Cable | 3PIN, 80cm |
| Material | Aluminum alloy |
| Module Size | 40*40*147mm |
| Module Weight | 250g |
| Application | Engraving or Cutting |
4.2 K30 Module Specifications
| Attribute | Value |
|---|---|
| Optical Power | 30W+ (28W-32W) |
| Electric Power | 24V 5A |
| Wavelength | 450nm (±20nm) |
| Focus Length | 40mm |
| Power Adjustable | TTL/PWM |
| Fan Speed | 9000rpm |
| Operating Temperature | 0-60°C |
| Interface | MR30 |
| Material | Aluminum & Copper |
| Module Size | 64x66x134mm |
| Module Weight | 710g |
| Application | Engraving/Cutting |
4.3 K40 Module Specifications
| Attribute | Value |
|---|---|
| Optical Power | 40W-46W |
| Input | 24V 6A |
| Wavelength | 450nm (±10nm) |
| Focus Length | 40mm |
| Power Adjustable | TTL/PWM |
| PWM Modulation | 0/3-12V, 0-5kHz |
| Air Assistance | Built-in airway |
| Fan Speed | 9000rpm |
| Operating Temperature | 0-60°C |
| Interface | 2EDG-3.81 |
| Material | Aluminum & Copper |
| Module Weight | 900g |
| Application | Engraving & Cutting |
4.4 K20 Pro Module Specifications
| Attribute | Value |
|---|---|
| Optical Power | 18W-22W |
| Electric Power | 24V 4A |
| Wavelength | 450nm (±10nm) |
| Focus Length | 40mm |
| Power Adjustable | TTL/PWM |
| Fan Speed | 6000rpm |
| Operating Temperature | 0-60°C |
| Interface | 2EDG-3.81 |
| Material | Aluminum & Copper |
| Module Size | 64x66x134mm |
| Module Weight | 587g |
| Application | Engraving/Cutting |
5. Setup and Connection
Before connecting the laser module, ensure compatibility with your engraving machine regarding voltage parameters and main control board ports.
5.1 Checking Compatibility
- Voltage Parameter: Ensure your engraving machine's voltage matches the laser module's requirements (e.g., 12V or 24V).
- Main Control Board Port: Identify the PWM, GND, and VCC ports on your engraving machine's main board.
5.2 Connection with Built-in Driver Board
If your laser module has a built-in driver board, connect it directly to the main board of your engraving machine. Ensure the yellow wire (PWM), red wire (Power), and black wire (GND) are connected correctly according to the pin definition of your machine's main board.
5.3 Connection with Driver Adapter (P-DA-01)
If the voltage parameters or pin definitions of your machine are not directly compatible, use the provided P-DA-01 Driver Adapter.
- Connect the cable of your engraving machine to the corresponding input connector on the P-DA-01.
- Connect the cable of the laser module to the Output A connector on the P-DA-01.
- Connect the corresponding power adapter (12V or 24V) to the DC Input connector on the P-DA-01.
- Push the switch on the adapter to the "EXT" position if using an external power supply, or "INT" for internal power supply.
The multi-hole sliding plate allows for mounting compatibility, and electrical compatibility with different machines can be achieved with the adapter plate.
6. Operation
6.1 Focus Adjustment
The laser module features a fixed focus lever for quick and easy adjustment of the focus distance according to your material and task (engraving or cutting).
- For Cutting: Make the focus locate slightly lower than the cutting material surface. For example, to cut 12mm material, the focus should be 6mm lower than the material surface. Adjust the fixed focus lever to 6mm.
- For Engraving: Ensure the focus is located directly on the engraving material surface. For example, to perform engraving, adjust the fixed focus lever to 0mm.
6.2 Red Crosshair Positioning
The red crosshair feature assists in precise positioning of the material for engraving and cutting, allowing for convenient secondary operations.
6.3 Engraving and Cutting Capabilities
The LASER TREE modules offer powerful engraving and cutting abilities across a range of materials. Performance varies by module power and material type.
Material Test Sheet (Suitable for laser modules with optical power >5W)
| Number | Material | Engraving | Cutting |
|---|---|---|---|
| 1 | Plywood | ✓ | ✓ |
| 2 | MDF | ✓ | ✓ |
| 3 | Acrylic (Deep color) | ✓ | ✓ |
| 4 | Polyester | ✓ | ✓ |
| 5 | Jeans | ✓ | ✓ |
| 6 | Paper | ✓ | ✓ |
| 7 | Linen | ✓ | ✓ |
| 8 | Rubber (Deep color) | ✓ | ✓ |
| 9 | Stainless Steel | ✓ | ✗ |
| 10 | Ceramic | ✓ | ✗ |
| 11 | Marble | ✓ | ✗ |
| 12 | Granite | ✓ | ✗ |
| 13 | Iron | ✓ | ✗ |
| 14 | Anodized aluminum | ✓ | ✗ |
| 15 | Copper | ✓ | ✗ |
| 16 | Plexiglass (Deep color) | ✓ | ✗ |
| 17 | Foam (Deep color) | ✗ | ✓ |
| 18 | Glass | ✗ | ✗ |
7. Maintenance
7.1 Lens Cleaning
Dirty lenses will cause a drop in performance. Regularly clean the lens to maintain the life of the module. You can get one spare lens with the kit to keep the machine running for a long time.
- When the laser module is not used for a long time, ensure that the lens is not polluted by dust.
- When you replace the air nozzle, ensure that your operation will not pollute the lens. Fingerprints or dust on the lens will weaken the output power of the laser module, or even damage the lens.
- If the cutting ability decreases, the lens might be dirty. Use a clean alcohol swab to clean it.
7.2 Over-temperature Alarm
The module is equipped with a thermistor to monitor the working temperature of the laser diode. The working temperature is displayed on a digital tube in real-time. If the temperature exceeds 55°C, an alarm will sound, indicating that the laser head needs to stop working to prevent damage and prolong its lifespan. You can choose to turn off the alarm via the "Alarm ON/OFF" button if needed, but it's recommended to address the overheating issue.
8. Troubleshooting
- Laser not working or weak performance:
- Check power supply voltage: Ensure the correct voltage (12V or 24V) is supplied to the module or adapter. Incorrect voltage can cause damage.
- Verify cable connections: Ensure all wires (PWM, GND, VCC) are correctly matched and securely connected.
- Clean the lens: A dirty or dusty lens can significantly reduce laser output power. Refer to the "Lens Cleaning" section.
- Check for overheating: If the module is too hot (above 55°C), it may stop working or perform poorly. Allow it to cool down.
- Compatibility issues with engraving machine:
- Use the provided driver adapter (P-DA-01) if your machine's main board has different pin definitions or voltage requirements.
- Ensure the adapter's switch is set correctly (EXT for external power, INT for internal).
- Software issues (e.g., GRBL):
- If the laser stops working with GRBL after some hours, check your software settings for any conflicts or incorrect configurations. Consult your engraving machine's software manual or support.
9. User Tips
- Material Settings: For materials like felt, dark tones may require 50-60% power for quick cutting, while white tones might need 100% power at a lower speed. Experiment with settings for optimal results.
- Focus Precision: The modules are noted for extremely precise focus, which is crucial for clean cuts and detailed engravings. Utilize the fixed focus lever effectively.
- Build Quality: Users appreciate the great build quality, indicating reliability and durability.
10. Warranty and Support
For any questions regarding your LASER TREE product, technical assistance, or warranty claims, please contact the seller or manufacturer directly. Ensure you provide your product model and purchase details for efficient support.
You can refer to the official user manual PDF for the LT-80W-AA-PRO module for more detailed instructions and diagrams. The PDF can be accessed via the seller's provided resources.