1. Introduction
The Godox TR Series Wireless Timer Remote Control is a versatile and portable device designed for photographers to capture stunning time-lapse photos, long exposures, and self-portraits. This multi-functional shutter remote features image stabilization and exposure timer functions, making it ideal for creative photography such as stars trails, sunsets, blooming flowers, and seascapes.
The TR Series utilizes 2.4GHz wireless transmission technology, providing a reliable remote control distance of up to 100 meters. With 32 selectable channels, it effectively eliminates interference from other similar devices, ensuring accurate connection and control of your camera. Each device (transmitter and receiver) is powered by two AA batteries, offering a standby time of 7000 hours for the transmitter and 350 hours for the receiver, allowing you to focus on your creativity without frequent battery concerns.
Weighing just 184 grams, the TR Series boasts a small form factor that easily fits into a jacket pocket, making it highly portable for photography on the go.
2. What's in the Box
Please check to ensure all items are present:
- Transmitter (TR-TX) x 1
- Receiver (TR-RX) x 1
- Shutter Cable x 1 (specific to your camera model)
3. Setup
3.1 Battery Installation
Both the TR-TX Transmitter and TR-RX Receiver require two AA batteries each. AA batteries are not included.
- Open the battery compartment cover on the back of both the Transmitter and Receiver.
- Insert two AA batteries into each device, ensuring correct polarity (+/-).
- Close the battery compartment covers securely.
3.2 Connecting to Camera
Use the appropriate shutter cable (included) to connect the receiver to your camera's remote control port.
- Identify the correct shutter cable for your camera model from the available TR Series cables (e.g., TR-C1, TR-N1, TR-P1).
- Plug one end of the shutter cable into the receiver's port.
- Plug the other end of the shutter cable into your camera's remote control port.
3.3 Channel Setting
The TR Series operates on 32 channels to prevent interference. Ensure both the transmitter and receiver are set to the same channel for proper communication.
- Use the 'CH' button on both the transmitter and receiver to cycle through the available channels (e.g., CH 32).
- Confirm that the channel displayed on both devices matches.
4. Operating Instructions
The TR Series offers various timer shooting settings for creative control over your photography.
4.1 Timer Shooting Settings
The transmitter allows you to program a 'Photographing Schedule' using the following functions:
- DELAY (Delay Time): Sets the delay before the first shot is taken (0s to 99h 59min 59s, with 1s increment). Useful for self-portraits or group photos.
- LONG (Exposure Time): Sets the duration of the shutter open time (0s to 99h 59min 59s, with 1s increment). Ideal for long exposure photography.
- INTVL1 (Interval Time between every shot): Sets the time between consecutive shots (0s to 99h 59min 59s, with 1s increment). Essential for time-lapse photography.
- INTVL1 N (Number of Shots): Specifies how many shots to take in the first interval sequence (1-999, or infinite).
- INTVL2 (Repeat Timer Schedule Interval Time): Sets the interval for repeating the entire timer schedule (0s to 99h 59min 59s, with 1s increment).
- INTVL2 N (Repeat Timer Schedule Times): Specifies how many times to repeat the entire timer schedule (1-999, or infinite).
4.2 Image Stabilization and Detail Preservation
Using the TR Series remote helps to reduce shaky hand movements and eliminates unwanted blurs, especially when shooting under high magnification or at slow shutter speeds. This results in better quality images with preserved details.
4.3 Wireless Transmission
The 2.4GHz wireless transmission ensures reliable control up to 100 meters, allowing for flexible positioning of your camera and creative shooting angles.
5. Compatibility
The Godox TR Series offers various models (TR-C1, TR-C3, TR-N1, TR-N3, TR-S1, TR-S2, TR-P1, TR-OP12) designed to be compatible with a wide range of cameras from major brands. Ensure you select the correct shutter cable for your specific camera model.
5.1 Compatible Camera Models by TR Series Variant
- TR-C1:
- Canon: 90D, 80D, 77D, 70D, 60D, 800D, 760D, 750D, 700D, 650D, 600D, 550D, 500D, 450D, 400D, 350D, 300D, 200D, 100D, 1500D, 1300D, 1200D, 1100D, 1000D, G10, G11, G12, G15, G16, G1X, SX70, SX60, SX50, EOS M6, M6II, M5
- Pentax: K5, K7, K10, K20, K100, K200, K1, K3, K30, K10D, K20D, K50
- Samsung: GX-1L, GX-1S, GX-10, GX-20, NX100, NX11, NX10, NX5
- Contax: 645, N1, NX, N digital, H series
- TR-C3:
- Canon: 1Ds Mark IV, 1Ds Mark III, 5D Mark III, 5D Mark II, 1Ds Mark II, 50D, 40D, 30D, 20D, 10D, 7D, 7D II, 6D, 5D, 5D2, 5D3, 1DX, 1Ds, EOS-1V
- TR-N1:
- Nikon: D850, D800E, D800, D700, D500, D300s, D300, D200, D5, D4, D3s, D3X, D3, D2Xs, D2X.D1X, D2HS, D2H, D1H, D1, F100, N90s, F90X, F5, F6, F90
- Fujifilm: S5 Pro, S3 Pro
- TR-N3:
- Nikon: D750, D610, D600, D7500, D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3300, D3200, D3100, D90
- TR-S1:
- Sony: a900, a850, a700, a580, a560, a550, a500, a450, a400, a350, a300, a200, a100, a99, a99II, a77, a77II, a65, a57, a55, a35, a33
- TR-S2:
- Sony: a7, a7m2, a7m3, a7s, a7SII, a7R, a7RII, a9, a9II, a58, a6600, a6400, a6500, a6300, a6000, a5100, a5000, a3000, NEX-3NL, HX50, HX60, HX300, HX400, RIRM2, RX10M2, RX10M3, RX10M4, RX100M2, RX100M3, RX100M4, RX100M5, RX100M6, RX100M7
- TR-P1:
- Panasonic: GH5II, GH5S, GH5, G90, G91, G95, G9, S5, S1H, DC-S1R, DC-S1, FZ1000II, BGH1, DMC-GH4, GH3, GH2, GH1, GX8, GX7, GX1, DMC-G7, G6, G5, G3, G2, G85, G10, G1, GF1, DMC-FZ2500, FZ1000, FZ300, FZ200, FZ150
- TR-OP12:
- Olympus: E-620, E-600, E-520, E-510, E-450, E-420, E-410, E-30, E-M5, E-P3, E-P2, E-P1, SP-570UZ, SP-560UZ, SP-550UZ, SP-510UZ, A900, A850, A700, A580, A560
6. Maintenance
- Keep the remote control clean and dry. Avoid exposure to dust, dirt, and moisture.
- Use a soft, dry cloth to clean the exterior. Do not use harsh chemicals or abrasive cleaners.
- Remove batteries if the device will not be used for an extended period to prevent leakage.
- Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures.
- Handle the shutter cables carefully to avoid bending or damaging the connectors.
7. Troubleshooting
- Remote not triggering camera:
- Ensure both transmitter and receiver are powered on and have fresh batteries.
- Verify that the transmitter and receiver are set to the same channel.
- Check that the shutter cable is securely connected to both the receiver and the camera.
- Confirm that the correct shutter cable for your camera model is being used.
- Ensure your camera is in a mode that allows remote shutter release.
- Limited range or intermittent connection:
- Check for potential sources of 2.4GHz interference (e.g., Wi-Fi routers, other wireless devices).
- Ensure there are no major obstructions between the transmitter and receiver.
- Replace batteries in both units if they are low.
- Timer settings not working as expected:
- Double-check all programmed timer settings (DELAY, LONG, INTVL1, INTVL1 N, INTVL2, INTVL2 N) on the transmitter.
- Ensure the camera is set to the appropriate shooting mode (e.g., Bulb mode for long exposures if applicable).
8. Specifications
| Feature | Wireless Timer Transmitter (TR-TX) | Wireless Timer Receiver (TR-RX) |
|---|---|---|
| Model | TR-TX | TR-RX |
| Power Supply | 2*AA Battery (3V) | 2*AA Battery (3V) |
| Stand-by Time | 7000h | 350h |
| Timer Delay | 0s to 99h 59min 59s (increment 1s) | / |
| Exposure Time | 0s to 99h 59min 59s (increment 1s) | / |
| Interval Time | 0s to 99h 59min 59s (increment 1s) | / |
| Shooting Numbers | 1-999 (infinite) | / |
| Repeat Timer Schedule | 0s to 99h 59min 59s (increment 1s) | / |
| Repeat Timer Schedule Times | 1-999 (infinite) | / |
| Channel | 32 | |
| Controlling Distance | ≈100m | |
| Working Environment Temperature | -20℃ ~ +50℃ | |
| Dimension | 99mm × 52mm × 27mm | 75mm × 44mm × 35mm |
| Net Weight (including AA batteries) | 100g | 84g |
9. User Tips
- Battery Check: Always check battery levels before an important shoot, especially for long time-lapse sequences, to avoid interruptions.
- Cable Matching: Double-check that you are using the correct shutter cable variant (e.g., TR-C1, TR-N3) for your specific camera model to ensure proper functionality.
- Practice Settings: Familiarize yourself with the various timer settings (Delay, Long, Interval) by practicing at home before attempting complex shots in the field.
- Interference: If experiencing connection issues, try changing the channel on both the transmitter and receiver to avoid interference from other 2.4GHz devices.
- Camera Mode: For advanced timer functions like long exposure, ensure your camera is set to the appropriate mode (e.g., Bulb mode) to allow the remote to control exposure duration.
10. Warranty and Support
This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included with your purchase for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact the retailer or Godox customer service directly. Keep your proof of purchase for warranty validation.