1. Introduction
This manual provides essential information for the proper use and maintenance of your GoPro Smart Remote, model ARMTE-001. This genuine replacement part is designed to control various GoPro Hero cameras, including Hero 8, Hero 7, Hero 6, GoPro MAX, Hero 3+, Hero 4, and Hero 5. It allows for convenient remote operation of your camera's functions, such as power, mode switching, and recording.
2. Product Overview
The GoPro Smart Remote ARMTE-001 is a compact, wireless remote control unit. It typically includes the remote itself, a USB charging cable, a wrist strap for mounting, and a small metal key/tool for maintenance or battery access (if applicable).




Components:
- Smart Remote Unit: Features an LCD screen for status display, a power/mode button, a record button, and a settings/tag button.
- USB Charging Cable: Proprietary cable for recharging the remote's internal battery.
- Wrist Strap: For securely attaching the remote to your wrist or gear.
- Metal Key/Tool: A small tool, possibly for opening a battery compartment or for specific mounting.
3. Setup Instructions
3.1 Charging the Remote
- Connect the proprietary end of the USB charging cable to the charging port on the bottom of the Smart Remote.
- Connect the standard USB-A end of the cable to a USB power source (e.g., computer, wall adapter).
- Allow the remote to charge until the battery indicator on the LCD screen shows a full charge.
3.2 Pairing with Your GoPro Camera
To use the Smart Remote, it must first be paired with your GoPro camera. The exact steps may vary slightly depending on your specific GoPro model, but the general process is as follows:
- On your GoPro Camera:
- Turn on your GoPro camera.
- Navigate to the camera's settings menu.
- Enable Wi-Fi and select the "Connect New Device" or "Pair Remote" option.
- On the Smart Remote:
- Ensure the remote is powered off.
- Press and hold the Power/Mode button for a few seconds until the remote powers on and enters pairing mode (often indicated by a flashing Wi-Fi icon or specific message on the LCD).
- Confirm Pairing:
- Once the camera detects the remote, confirm the pairing on both devices.
- The remote's LCD screen should display the camera's status (e.g., battery level, recording mode) once successfully paired.
3.3 Attaching the Wrist Strap
Slide the remote into the designated slot on the wrist strap. Secure the strap comfortably around your wrist or attach it to compatible gear.
4. Operating Instructions
Once paired, the Smart Remote allows you to control your GoPro camera from a distance.
4.1 Basic Controls
- Power On/Off: Press and hold the Power/Mode button (usually marked with a circle and a line) for approximately 2-3 seconds.
- Change Mode: Short press the Power/Mode button to cycle through the camera's different modes (e.g., Video, Photo, Time Lapse).
- Start/Stop Recording or Shutter: Press the Record button (usually marked with a red circle) to start or stop video recording, or to take a photo.
- Settings/Tag: The third button (if present, often on the side or top) can be used to access settings or add a HiLight Tag during recording, depending on the camera model and firmware.
4.2 LCD Screen Information
The remote's LCD screen displays important information about your camera's status, including:
- Current shooting mode (Video, Photo, etc.)
- Recording status (recording, paused)
- Battery level of both the remote and the connected camera
- Remaining recording time or photo count
- Wi-Fi connection status
5. Maintenance
- Cleaning: Wipe the remote with a soft, damp cloth. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: Recharge the remote's battery regularly, even if not in frequent use, to maintain battery health. Avoid fully discharging the battery for extended periods.
- Water Exposure: While GoPro products are often rugged, refer to your specific camera's manual for water resistance ratings of the remote if used in wet conditions.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote does not power on. | Low or depleted battery. | Charge the remote using the provided USB cable. |
| Remote does not connect to camera. | Not paired, camera Wi-Fi off, or interference. | Ensure camera Wi-Fi is on. Re-attempt pairing process (Section 3.2). Move closer to the camera. |
| Buttons are unresponsive. | Software glitch or physical damage. | Try powering the remote off and on again. If issue persists, contact seller support. |
| LCD screen is blank or flickering. | Battery issue or internal fault. | Ensure remote is fully charged. If problem continues, contact seller support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | ARMTE-001 |
| Compatible Brand | GoPro |
| Compatible Camera Models | Hero 8, Hero 7, Hero 6, GoPro MAX, Hero 3+, Hero 4, Hero 5 |
| Material | Metal (internal components), Plastic (housing) |
| Power Input | 5VDC 500mAh |
| FCC ID | WPBFRC001 |
| Condition | 95% new, without original box |
| Package Contents | Smart Remote, USB Charging Cable, Wrist Strap, Metal Key/Tool |
8. Warranty and Support
As this product is listed as a repair part and "95% new, without original box," specific manufacturer warranty details may not apply. However, the seller offers certain assurances:
- Quality Assurance: All parts are tested and confirmed to be working well before shipment.
- Fast Delivery & Refunds: The seller provides a fast delivery service and offers refunds for issues such as delayed delivery (with a $1.00 coupon if delayed), lost packages, or damaged items.
- Free Returns: Free returns are available within 90 days of purchase.
- Customer Service: For any questions or issues regarding the product, please contact the seller directly through the platform where the purchase was made.