abdo Q-24, Q-12, Q-22 Series

Contents

abdo USB Audio Interface Sound Card User Manual

Models: Q-24, Q-12, Q-22 Series

1. Introduction

Thank you for choosing the abdo Professional USB Audio Interface Sound Card. This device is designed to provide high-quality audio recording and monitoring for musicians, podcasters, and content creators. It features dual microphone inputs, RCA input/output, 24-bit/192kHz audio resolution, and ultra-low-latency monitoring. This manual will guide you through the setup, operation, and troubleshooting of your audio interface.

2. Safety Information

Please read and understand the following safety precautions before using the device:

  • Do not expose the device to rain, moisture, or extreme temperatures.
  • Avoid placing the device near heat sources or in direct sunlight.
  • Use only the provided USB cable for connection to a computer.
  • Ensure all connections are secure before powering on the device.
  • Turn down all volume controls to minimum before connecting or disconnecting external equipment to prevent sudden loud noises or damage.
  • When 48V phantom power is required for a condenser microphone, ensure the switch is turned on after connecting the microphone and turned off before disconnecting.

3. Package Contents

Verify that all items are present in your package:

  • 1 x USB Audio Interface (Q-24, Q-12, or Q-22 model)
  • 1 x Type A to B High Speed USB Cable
  • 1 x User Manual (this document)

4. Product Overview

The abdo USB Audio Interface offers professional-grade audio capabilities in a compact design. Key features include:

  • Dual Microphone Interface: Two MIC (XLR)/LINE (TRS) input interfaces for microphones or digital musical instruments.
  • High Resolution Audio: Supports 24-bit/192kHz HD sound quality with flexible sampling rates (44.1K/48K/88.2K/96K/176.4K/192KHz).
  • RCA Input and Output: Provides additional connectivity for external audio sources and output to speakers.
  • Ultra-low-latency Monitoring: Dedicated headphone jack with individual volume control for real-time monitoring.
  • 48V Phantom Power: Essential for condenser microphones.
  • Loopback/Cover Function: Allows synchronous data transmission for streaming and live broadcasting.
  • Drive-Free USB 2.0: Easy plug-and-play connectivity with computers.

4.1. Interface Diagrams

Familiarize yourself with the front and rear panels of your audio interface model.

Q-24 Front and Rear Views

Figure 1: Q-24 Front and Rear Panel Views

Q-22 Front and Rear Views

Figure 2: Q-22 Front and Rear Panel Views

Q-12 Front View

Figure 3: Q-12 Front Panel View (16Bit@48Khz)

Q-22 Interface Diagram with Labels

Figure 4: Q-22 Interface Diagram with Labeled Ports and Knobs

5. Setup

Follow these steps to set up your abdo USB Audio Interface:

5.1. Connecting to a Computer

  1. Connect the provided Type A to B High Speed USB Cable from the USB 2.0 port on the rear of the audio interface to an available USB port on your computer. The device is drive-free, so no complex driver installation is required.
  2. If using an iPad, connect it via the 5V microUSB port for power to enable mobile music production.

5.2. Connecting Audio Equipment

Refer to the connection diagrams for your specific model (Q-24 or Q-22) for visual guidance.

Q-24 Front Panel Connection Diagram

Figure 5: Q-24 Front Panel Connections (Guitar, Synthesizer, Microphone, Earphone)

Q-24 Rear Panel Connection Diagram

Figure 6: Q-24 Rear Panel Connections (PC, CD/Phone, Power Amplifier)

Q-22 Connection Diagram with Warnings

Figure 7: Q-22 Connection Diagram with Warnings

  • Microphones: Connect your microphone(s) to the MIC/LINE input interfaces (INPUT 1, INPUT 2) using XLR or TRS cables.
  • Instruments: Connect instruments like electric guitars or synthesizers to the HI-Z (high impedance) input or LINE inputs.
  • Headphones: Plug your headphones into the PHONES jack for monitoring.
  • Speakers/Monitors: Connect your main output speakers to the MAIN OUTPUTS (1/L, 2/R) or RCA OUT ports.
  • External Audio Source (RCA IN): Connect devices like CD players or phones to the RCA IN ports for accompaniment.

6. Operating Instructions

Once connected, you can begin using your audio interface for recording and monitoring.

6.1. Powering On and Initial Checks

  1. Ensure the USB cable is connected to your computer. The device will power on automatically.
  2. Check the PWR indicator light to confirm the device is receiving power.
  3. If using a condenser microphone, activate the +48V POWER switch. Ensure the microphone is connected before turning on phantom power.

6.2. Adjusting Volume Levels

  • GAIN Knobs (GAIN 1, GAIN 2): Adjust these knobs to control the input level of your microphones or instruments. Monitor the PEAK and SIG indicators to avoid clipping (PEAK light should not stay red).
  • PHONES Knob: Controls the volume of your headphones for monitoring.
  • OUTPUT Knob: Controls the overall output volume to your main speakers.
  • MIX-DAW Knob: Balances the mix between direct input monitoring (MIX) and playback from your computer (DAW).

6.3. Recording with Software

This device supports all free recording software and DAWs. The following video demonstrates a basic recording setup using Audacity.

Video 1: Product Demonstration and Setup for Recording with Audacity

  1. Open your preferred recording software (e.g., Audacity).
  2. Select the audio interface as your input device within the software's audio settings.
  3. Adjust the input gain on the audio interface and within the software to achieve a healthy signal level without clipping.
  4. Press the record button in your software to begin recording.

6.4. Loopback/Cover Function

The loopback function allows you to mix audio input from streaming media with your live input (microphone/instrument) for synchronous data transmission to the internet, recording, or live broadcasting (e.g., K-song). Use the LOOP BACK switch/button to activate this feature.

7. Specifications

FeatureSpecification
MIC INPUT 1-2 (balanced)
Frequency Response-1 / -1 dB, 20 Hz - 20 kHz
Dynamic Range82 dB, A weighting
THD+N0.03 %, 1 kHz
Maximum Input Level+6 dBu
Input Resistance4 kΩ
Gain Range+3 dB - +60 dB
HI-Z INPUT 2 (Unbalanced)
Maximum Input Level+3.0 dBV
Input Resistance1 MΩ
Gain Range0 dB - +40 dB
LINE INPUT 1/2 (balance)
Maximum Input Level+10 dBu
Input Resistance18.5 kΩ
Gain Range-10 dB - +40 dB
MAIN OUTPUT (Impedance balance)
Frequency Response-1 / -1 dB, 20 Hz - 20 kHz
Dynamic Range82 dB, A weighting
THD+N0.03 %, 1 kHz
Maximum Output Level+6 dBu
Output Resistance100 kΩ
PHONES
Maximum Output Level15 mW + 15 mW, 40Ω
USB
Technical SpecificationsFull speed USB 2.0, 24-bit, 44.1kHz/48kHz/88.2kHz/96kHz/176.4kHz/192kHz
XLR INPUT
Polarity1: Grounding, 2: Hot wire (+), 3: Cold wire (-)
Power Requirements> 5W
Built-in BatteryNo
CertificationCE, FCC, RoHS

8. Troubleshooting

If you encounter issues with your audio interface, refer to the following common problems and solutions:

8.1. Repetitive Sound or Severe Distortion

This issue often occurs due to a loopback setting in your computer's audio mixer.

  1. Access your computer's sound settings or volume mixer.
  2. Locate the settings for your audio interface.
  3. Turn off any 'return to listening' or 'listen to this device' options for the audio interface.
  4. Click 'Apply' and then 'OK' to save the settings.

8.2. No Sound Output

  • USB Cable: Confirm that the correct USB cable (preferably the one included) is used and securely connected to both the device and the computer.
  • Volume Controls: Check if the [OUTPUT] knob and [PHONES] knob on the audio interface are set to an audible level.
  • Connections: Ensure microphones, speakers, and headphones are properly connected to the device's respective ports. Refer to the connection diagrams in Section 5.2.
  • Speaker Power: If using external speakers, verify that their power switch is turned on and they are functioning correctly.
  • Software Settings: In your recording software or computer's sound settings, ensure the abdo USB Audio Interface is selected as the output device.

9. Maintenance

To ensure the longevity and optimal performance of your audio interface, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or abrasive materials.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use.
  • Handling: Handle the device with care to avoid physical damage to knobs, ports, and the casing.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.