1. Product Overview
The JIAYIN JYPC-2 is a compact and efficient electromagnetic solenoid water pump designed for various applications requiring water transfer, such as electric irons, steam mops, and garment steamers. It operates on AC power and features a robust piston pump structure, ensuring reliable performance for its intended uses.
2. Specifications
The JIAYIN JYPC-2 pump is part of a series with specific performance characteristics. Please refer to the label on your pump for exact voltage and frequency. General specifications are provided below, combining information from product attributes and technical diagrams.
General Technical Data (JYPC-2 Series)
| Parameter | Value | Unit |
|---|---|---|
| Power Source | Electric (AC) | - |
| Theory | Electromagnetic Pump | - |
| Structure | Piston Pump | - |
| Standard or Nonstandard | Standard | - |
| Pressure | High Pressure | - |
| Usage | Water | - |
| Certification | CE | - |
| High-concerned chemical | None | - |
| Voltage (V) | 100-240 | AC |
| Frequency (Hz) | 50/60 | Hz |
| Power (W) | 16 | W |
| Max Pressure (bar) | 2.5 - 3.0 | bar |
| Average Flow (cc/min) | 50 - 180 | cc/min |
| Noise (dB) | 36 - 48 | dB |
| Max Ambient Temperature (TA) | 70 | °C |
| Max Fluid Temperature (TF) | 60 | °C |
| Duty Cycle (ED) | 100% | - |
Dimensions
- Overall Length: 78.5 mm (3.1 inches)
- Body Width: 38 mm (1.5 inches)
- Overall Height (approx): 53 mm (from diagram in Figure 2)
- Inlet/Outlet Nozzle Outer Diameter: 11 mm (0.43 inches)
- Inlet/Outlet Nozzle Inner Diameter: 5.5 mm
- Nozzle Length: 24 mm (0.94 inches)
- Electrical Terminal Width: 8 mm (0.31 inches)
3. Safety Information
Always observe the following safety precautions to prevent injury or damage to the pump:
- Voltage Matching: Ensure the pump's voltage and frequency ratings (e.g., AC220V-240V, 50Hz) precisely match your power supply. Incorrect voltage can cause severe damage.
- Power Disconnection: Always disconnect power before attempting any installation, maintenance, or troubleshooting procedures.
- Avoid Dry Operation: Do not operate the pump without water. Running dry can lead to overheating and permanent damage to internal components.
- Electrical Safety: Keep all electrical connections dry and protected from water exposure. Ensure proper insulation and grounding according to local electrical codes.
- Intended Use: This pump is specifically designed for water transfer. Do not use it with flammable, corrosive, abrasive, or other non-approved liquids, as this can damage the pump and create safety hazards.
4. Installation and Setup
Follow these steps for proper installation of your JYPC-2 pump:
- Mounting: Securely mount the pump in the desired location. If your model includes mounting brackets (as shown in Figure 4), use them to ensure stability and reduce vibration. Ensure the mounting surface is stable and can support the pump's weight.
- Water Connections: Connect the water inlet and outlet hoses to the pump's nozzles. The nozzles have an outer diameter of 11mm. Use appropriate hose clamps or fittings to ensure all connections are tight and leak-free.
- Electrical Wiring: Connect the pump to your AC power supply. Double-check that the voltage (e.g., AC220V-240V) and frequency (e.g., 50Hz) of your power source match the pump's specifications. If you are unsure about electrical wiring, consult a qualified electrician to ensure safe and correct connection. The electrical terminals are designed for standard connections.
- Priming (if necessary): Depending on your specific application and system design, you may need to prime the pump by ensuring the inlet line is filled with water before initial operation. This prevents dry running and ensures immediate water flow.
5. Operating Instructions
Once the pump is correctly installed and all connections are verified, follow these steps for operation:
- Ensure all water and electrical connections are secure and there are no visible leaks or loose wires.
- Verify that the water source is available and the pump is adequately supplied with water to prevent dry running.
- Apply power to the pump. The pump will activate and begin transferring water according to its specifications.
- During the first few minutes of operation, monitor the pump for any unusual noises, vibrations, or signs of leakage.
6. Maintenance
Regular maintenance is crucial for ensuring the longevity and optimal performance of your JYPC-2 pump:
- Cleaning: Periodically inspect the pump's water inlet and outlet nozzles for any accumulation of debris, sediment, or blockages. Clean as necessary using a soft brush or cloth.
- Leak Checks: Regularly check all hose connections and the pump body for any signs of water leakage. Tighten hose clamps or connections, and replace any worn or damaged seals/hoses promptly.
- Storage: If the pump will not be used for an extended period, it is recommended to drain any remaining water from the pump and connected lines to prevent freezing in cold environments or mineral buildup. Store the pump in a dry, cool, and protected location.
7. Troubleshooting
If you encounter issues with your JYPC-2 pump, refer to the following common problems and their potential solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power supply or incorrect voltage/frequency | Check power connection, fuse, or circuit breaker. Verify that the power supply matches the pump's specifications. |
| Pump runs but no water flows | Air in the system (not primed) | Ensure the pump is properly primed and there is water in the inlet line. |
| Inlet or outlet blocked by debris | Disconnect power and inspect/clear any blockages in the hoses or pump nozzles. | |
| Water leakage | Loose hose connections or damaged seals/hoses | Tighten hose clamps or connections. Inspect and replace any damaged seals or hoses. |
| Unusual noise during operation | Air in the system or dry running | Ensure proper priming and a continuous water supply. |
| Debris inside pump or worn components | Disconnect power and carefully inspect for foreign objects. If noise persists, contact support. |
If the problem persists after attempting these solutions, please contact customer support for further assistance.
8. User Tips
- Voltage Verification: Always double-check the voltage rating on your specific pump model against your power supply before connecting to prevent electrical damage.
- Prevent Dry Running: To maximize pump lifespan and prevent damage, ensure a continuous water supply and avoid running the pump without liquid.
- Secure Connections: Use appropriate clamps or fittings to ensure all water connections are watertight and prevent leaks, especially in applications involving pressure.
- Regular Inspection: Periodically inspect the pump and its connections for any signs of wear, corrosion, or blockages to maintain optimal performance.
9. Warranty and Support
The JIAYIN JYPC-2 Electromagnetic Solenoid Water Pump is manufactured to high-quality standards. For any issues, technical support, or warranty inquiries, please contact the seller or manufacturer directly. It is advisable to keep your purchase receipt or order details as proof of purchase.
While specific warranty terms may vary by region and seller, general support for product defects is typically provided. For detailed information regarding returns or refunds, please refer to the platform's policies where the product was purchased.