Flytec V050-11

Contents

Flytec V050-11 Remote Control Instruction Manual

Model: V050-11

1. Introduction

Thank you for choosing the Flytec V050-11 Remote Control. This one-hand controller is designed as a spare part for Flytec V050 series RC boats, providing precise and easy control. This manual will guide you through the setup, operation, and maintenance of your remote control to ensure optimal performance.

2. Safety Information

  • This product is intended for users aged 14 years and older.
  • Keep the remote control away from water and moisture to prevent damage.
  • Do not attempt to disassemble or modify the remote control, as this may void the warranty and cause malfunction.
  • Ensure batteries are inserted correctly according to polarity markings.
  • Store the remote control in a cool, dry place when not in use.

3. Package Contents

  • 1 x Flytec V050-11 Remote Control

Note: Batteries are not included.

4. Specifications

FeatureSpecification
Model NumberV050-11
Brand NameFlytec
MaterialComposite Material
Size4.6 x 5.9 x 13.9 cm
Weight77.6g
Quantity1 pcs
Is ElectricNo Battery
Recommend Age14+y
CertificationCE
Flytec V050-11 Remote Control with dimensions
Figure 1: Flytec V050-11 Remote Control with dimensions (13.9cm length, 5.9cm width, 4.6cm depth).

5. Setup

5.1 Battery Installation

The remote control requires batteries (not included). Open the battery compartment on the back of the remote control and insert the required batteries, ensuring correct polarity. Close the compartment securely.

Back view of the Flytec V050-11 remote control, showing the battery compartment area.
Figure 2: Back view of the remote control, indicating the battery compartment.

5.2 Frequency Matching (Pairing)

The remote control must be paired with the boat's circuit board to function correctly. This remote control is specifically designed for the Flytec V050 original model circuit board.

  1. Ensure the remote control has fresh batteries installed.
  2. Press and hold the OK button on the remote control.
  3. While holding the OK button, turn on the boat's power switch.
  4. Finally, turn on the remote control's power switch.
  5. You should hear a "beep" sound, indicating that the frequency pairing is complete.

Important: If the remote control cannot control the boat after following these steps, please try this method again to repair it.

Diagram illustrating the frequency matching process for the remote control and boat.
Figure 3: Frequency Matching Instructions.

5.3 Boat Circuit Board Wiring

Ensure your boat's circuit board is correctly wired for the remote control to function. The image below shows the connection points on a compatible Flytec V050 circuit board.

Flytec V050 boat circuit board with labeled connection points.
Figure 4: Flytec V050 Boat Circuit Board Wiring Diagram. Labels include Front Light, Rear Light, Battery Indicator, Switch, Battery, Right Motor, Left Motor, and Silo connections.

6. Operating the Remote Control

The Flytec V050-11 remote control features a one-hand design for intuitive operation of your RC boat.

Front view of the Flytec V050-11 remote control, showing buttons and joystick.
Figure 5: Front view of the remote control.
  • Joystick/Main Control: Use the central joystick for directional control of the boat (forward, backward, left, right).
  • OK Button: Used for frequency matching and potentially for confirming actions or engaging specific functions (refer to your boat's specific manual for detailed functions).
  • Directional Pad: The four-way directional pad (up, down, left, right arrows) typically controls trim adjustments or auxiliary functions.
  • Power Indicator: The red light at the top indicates power status and pairing activity.

For specific functions related to your RC boat's features (e.g., bait release, lights), refer to the instruction manual provided with your Flytec V050 boat model.

7. Maintenance

  • Cleaning: Wipe the remote control with a soft, dry cloth. Do not use harsh chemicals or solvents.
  • Storage: Remove batteries if the remote control will not be used for an extended period to prevent leakage. Store in a dry, cool place.
  • Battery Replacement: Replace batteries when the power indicator light dims or the remote control's range/responsiveness decreases.

8. Troubleshooting

8.1 Remote Control Not Responding / Not Controlling Boat

  • Check Batteries: Ensure batteries are correctly installed and have sufficient charge. Replace if necessary.
  • Re-pair Frequency: Follow the "Frequency Matching" steps in Section 5.2 carefully. This is a common solution for connection issues.
  • Boat Power: Ensure the RC boat is powered on and its battery is charged.
  • Compatibility: Verify that this V050-11 remote control is compatible with your specific Flytec V050 boat model's circuit board.

9. User Tips

  • Pairing is Key: Many users find that successful operation hinges on correct frequency matching. Always ensure the remote and boat are properly paired before use. If control is lost, re-pairing is the first step.
  • Dedicated Use: This remote is designed for the Flytec V050 series. Using it with other models or non-original circuit boards may lead to incompatibility.

10. Warranty and Support

For warranty information or technical support, please contact the Flytec Official Store or your original point of purchase. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.