Flytec V050-09/V050-10

Contents

Flytec V050 Circuit Board Set Instruction Manual

For V050-09 Boat Circuit Board (Receiving Board) and V050-10 Controller Circuit Board (Launching Board)

1. Introduction

This manual provides detailed instructions for the installation, pairing, operation, and maintenance of the Flytec V050 Circuit Board Set. This set includes the V050-09 Boat Circuit Board (Receiving Board) and the V050-10 Controller Circuit Board (Launching Board), designed as original accessories and spare parts for the Flytec V050 RC Fishing Bait Boat. Proper installation and pairing are crucial for optimal performance.

2. Specifications

AttributeValue
Brand NameFlytec
Model NumberV050-09/V050-10
MaterialComposite Material
For Vehicle TypeBoats
RC Parts & AccsRECEIVERS
Remote Control Peripherals/DevicesRECEIVERS
V050-09 Boat Circuit Board Size5.7*6.8*1.3cm
V050-10 Controller Circuit Board Size9.5*3.4*2cm
Weight (each board)20g
Recommend Age14+y
Is ElectricNo battery
Is Batteries IncludedNo
Quantity2 (one pair)

3. Package Contents

  • 1 x V050-09 Boat Circuit Board (Receiving Board)
  • 1 x V050-10 Controller Circuit Board (Launching Board)

4. Setup and Installation

Before using the new circuit board set, ensure both boards are correctly installed in their respective devices (boat and remote control). After physical installation, the boards must be paired.

4.1. Component Overview

V050-09 Boat circuit board and V050-10 Controller circuit board side-by-side.

Figure 1: V050-09 Boat Circuit Board (left) and V050-10 Controller Circuit Board (right)

V050-09 Boat circuit board with dimensions (5.7x6.8x1.3cm).

Figure 2: V050-09 Boat Circuit Board with dimensions

V050-10 Remote Control Circuit Board with dimensions (9.5x3.4x2cm).

Figure 3: V050-10 Remote Control Circuit Board with dimensions

4.2. Boat Circuit Board Connections (V050-09)

Refer to the diagram below for the connection points on the V050-09 Boat Circuit Board:

V050-09 Boat circuit board with labeled connection points for Front Light, Rear Light, Battery Indicator, Switch, Battery, Right Motor, Left Motor, and Silo.

Figure 4: V050-09 Boat Circuit Board labeled connections

  • Front Light: Connect the front navigation lights.
  • Rear Light: Connect the rear navigation/signal lights.
  • Battery Indicator: Connect the battery level indicator.
  • Switch: Connect the main power switch.
  • Battery: Connect the main power battery.
  • Right Motor: Connect the right propulsion motor.
  • Left Motor: Connect the left propulsion motor.
  • Silo: Connect the bait hopper release mechanism.

4.3. Frequency Matching (Pairing)

After installing both circuit boards, they must be paired to establish communication. Follow these steps:

  1. Press and hold the OK button on the remote control (V050-10 Controller Circuit Board).
  2. While holding the OK button, turn on the boat switch (connected to V050-09 Boat Circuit Board).
  3. Finally, turn on the remote control switch.
  4. Listen for a "beep" sound. Once you hear it, the frequency pairing is complete.
Frequency Matching instructions for the V050 circuit board set.

Figure 5: Frequency Matching Instructions

Note: If the remote control cannot control the boat after initial pairing, please repeat this frequency matching procedure to repair the connection.

5. Operating the V050 RC Fishing Bait Boat

Once the circuit boards are installed and paired, your Flytec V050 RC Fishing Bait Boat is ready for operation. The boat and remote control offer several features for an enhanced fishing experience:

  • Enhanced Signal: Equipped with a 2.4GHz enhanced antenna for more stable signal transmission and reception.
  • Portability: Features a foldable boat handle for easier carrying and transport.
  • Convenient Control: Designed for single-handed remote control for convenient use.
  • Bait Capacity: Includes a large capacity hopper capable of carrying up to 4.4 lbs of bait.
  • Fixed Point Baiting: Supports simultaneous baiting and hook feeding at a fixed point.
  • Extended Range: Offers a remote control distance of up to 500 meters.
  • Stable Navigation: Features automatic correction of yaw, ensuring the boat remains unaffected by wind and waves.
  • Cruise Control: One-click function to enter "cruise control" mode, saving time and effort during long-distance baiting.
  • Night Fishing Lights: Double high brightness lights for luring fish and night navigation.
  • Lighting Modes: Dual mode lighting with free switching capability.
  • Directional Indicators: Rear turning signal lights to distinguish direction.

Video 1: Demonstration of Flytec V050 RC Fishing Bait Boat features

6. Maintenance

To ensure the longevity and optimal performance of your circuit boards, follow these maintenance guidelines:

  • Keep Dry: Always ensure the circuit boards are kept dry. Moisture can cause short circuits and damage.
  • Clean Gently: If cleaning is necessary, use a soft, dry brush or cloth to gently remove dust and debris. Avoid using liquids or harsh chemicals.
  • Inspect Connections: Periodically check all wire connections to ensure they are secure and free from corrosion.
  • Proper Storage: When not in use for extended periods, store the boards in a cool, dry place away from direct sunlight and extreme temperatures.

7. Troubleshooting

If you encounter issues with your Flytec V050 Circuit Board Set, consider the following:

  • Remote Control Not Responding: If the remote control cannot control the boat, first re-attempt the frequency matching procedure (Section 4.3). Ensure both the boat and remote control are powered on during the pairing process.
  • Board Malfunction: If a board is not functioning correctly (e.g., "the second board in the series is damaged and does not control the boat"), inspect the board for any visible physical damage, loose components, or incorrect wiring. Ensure all connections are firm and correctly seated.
  • General Non-Functionality: If the "item didn't work" upon installation, double-check all installation steps, including power connections and switch positions. Verify that the correct voltage is being supplied to the boat and remote control.
  • Unexpected Boat Behavior (e.g., drifting): Ensure all motor connections are correct and secure. Proper installation of the circuit boards can help resolve issues like unintended drifting.

8. User Tips

  • Careful Installation: Users have reported successful operation after replacing circuit boards, emphasizing the importance of careful and correct installation. Take your time to ensure all wires are connected properly.
  • Resolve Drift Issues: If your boat was previously drifting, replacing and correctly installing the circuit boards can often resolve this issue, leading to stable performance on the water.
  • Verify Compatibility: Always ensure you are using the correct circuit board models (V050-09 and V050-10) for your Flytec V050 bait boat to avoid compatibility issues.

9. Warranty and Support

For warranty information or technical support, please refer to the product's original purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.