Aigo AR12

Contents

Aigo AR12 120mm PC Fan Instruction Manual

Model: AR12 | Brand: Aigo

1. Introduction

Thank you for choosing the Aigo AR12 120mm PC Fan. This fan is designed to provide efficient cooling and impressive ARGB lighting effects for your computer case or radiator. This manual will guide you through the installation, operation, and maintenance of your Aigo AR12 fan to ensure optimal performance and longevity.

Aigo AR12 fan kit with remote and controller box
Aigo AR12 fan kit with remote control and controller box.

2. Package Contents

The contents of your Aigo AR12 fan package may vary depending on the specific SKU purchased. Please verify your package against the options below:

  • Single Fan Package: 1 x Aigo AR12 120mm Fan (black single fan)
  • 3 Fan Set Package: 3 x Aigo AR12 120mm Fans (black), 1 x Controller Box, 1 x Remote Controller, Screws
  • 5 Fan Set Package: 5 x Aigo AR12 120mm Fans (black), 1 x Controller Box, 1 x Remote Controller, Screws
  • Remote Controller Only: 1 x Remote Controller (no fans included)

Note: When purchasing a single fan, a controller is not included. If a controller is needed, it must be purchased separately.

Set of 5 Aigo AR12 fans with controller and remote
Example of a 5-fan set package with controller and remote.

3. Specifications

FeatureSpecification
Model NumberAR12
Brand NameAigo
Fan Size120mm (120x120x25mm)
Fan Speed1200 - 1350 RPM (±10%)
Air Volume48 CFM
Noise Level20 dBA
Bearing TypeFluid Bearing
Fan Life100,000 hrs
Voltage12V
Current0.16A
Rated Power4.2W
Power Interface6-pin (fan), SATA (controller), 5V 3-pin ARGB (motherboard sync)
Used ForCase, Radiator
Blade Quantity7
CertificationsCE, FCC, RoHS
Weight158g

4. Installation Guide

4.1. Controller Box Wiring

  1. Power Connection: Connect the SATA power cable from your power supply unit (PSU) to the SATA port on the controller box.
  2. Fan Connections: Connect each Aigo AR12 fan to the 6-pin ports (FAN1-FAN10) on the controller box. Connect them in sequence from FAN1 to FAN10 for proper detection and control.
  3. LED Strip Connection (Optional): If you are using Aigo ARGB LED strips, connect them to the LED1 and LED2 ports on the controller box.
  4. Reset Button Connection (Optional): To control the lighting effects using your computer case's reset button, connect the reset cable from your case to the 'Reset' port on the controller box.
  5. Motherboard ARGB Sync (Optional): For motherboard synchronization (Aura Sync, RGB Fusion, Mystic Light Sync, Polychrome RGB), connect the 5V 3-pin ARGB cable from the controller box to the 5V 3-pin ARGB header on your motherboard. Ensure it is a 5V 3-pin header, not a 12V 4-pin RGB header.
Wiring diagram for Aigo AR12 fans, controller, power supply, and LED strips
Wiring diagram for Aigo AR12 fans and controller.
Motherboard ARGB sync connection diagram (5V 3-pin)
Motherboard 5V 3-pin ARGB sync connection.

4.2. Fan Mounting

Mount the fans to your PC case or radiator using the provided screws. Ensure the airflow direction is appropriate for your cooling setup (intake or exhaust).

PC case with multiple Aigo AR12 fans installed, showcasing RGB lighting
Aigo AR12 fans installed in a PC case.

5. Operating Instructions

5.1. Remote Control Usage

The remote control allows you to manage fan speed and RGB lighting effects. Ensure the RC/MB switch on the controller box is set to 'RC' for remote control operation.

Aigo AR12 fan with a close-up of the fan blades and anti-shock pads
Aigo AR12 fan design with anti-shock pads.

Remote Control Functions:

  • ON/OFF: Power on/off the lighting. The OFF key is only responsible for switching lights, fan control is independent.
  • S+/S-: Adjust fan speed (Speed increases/reduces function keys).
  • M+/M-: Cycle through different lighting modes/patterns. All patterns in AUTO mode are executed sequentially, each pattern runs for 5 seconds.
  • Color Buttons: Select specific monochromatic colors (seven colors available).
  • RC/MB Switch: Toggles between remote control (RC) and motherboard (MB) control for RGB lighting.

5.2. Motherboard Sync (M/B SYNC)

If you have connected the 5V 3-pin ARGB cable to your motherboard, set the RC/MB switch on the controller box to 'MB'. You can then control the RGB lighting effects through your motherboard's RGB software (e.g., ASUS Aura Sync, GIGABYTE RGB Fusion, MSI Mystic Light Sync, ASRock Polychrome RGB).

5.3. Visual Demonstration

Video showcasing the dynamic RGB lighting effects of the Aigo AR12 fans.

6. Maintenance

Regular maintenance helps prolong the life and performance of your Aigo AR12 fans.

  • Dust Cleaning: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
  • Cable Management: Ensure all cables are neatly managed and not obstructing airflow or fan movement.
  • Bearing: The fluid bearing design is low-maintenance, but avoid applying excessive force or pressure to the fan hub.

7. Troubleshooting

  • Fans Not Spinning:
    - Check if the SATA power cable is securely connected to the controller box and the PSU.
    - Ensure the 6-pin fan cables are correctly plugged into the controller box ports (FAN1-FAN10).
  • RGB Lighting Not Working:
    - Verify the SATA power connection to the controller box.
    - Check the RC/MB switch position. If using the remote, ensure it's set to 'RC'. If using motherboard software, ensure it's set to 'MB' and the 5V 3-pin ARGB cable is correctly connected to the motherboard header.
    - Confirm that your motherboard's ARGB header is 5V 3-pin and not 12V 4-pin. Connecting to a 12V header can damage the LEDs.
  • Remote Control Not Responding:
    - Check the battery in the remote control.
    - Ensure the RC/MB switch on the controller box is set to 'RC'.
  • Compatibility Issues:
    - The Aigo AR12 fans and controller are designed for compatibility within the Aigo AR series. Compatibility with other brands' fans or controllers is not guaranteed.

8. User Tips

  • Optimal Airflow: Plan your fan placement carefully to create an effective airflow path within your PC case, typically intake from the front/bottom and exhaust from the rear/top.
  • Noise Reduction: The anti-shock pads on the fan corners help reduce vibration and noise. Ensure they are properly seated during installation.
  • Cable Management: Good cable management not only improves aesthetics but also enhances airflow, contributing to better cooling performance.
  • Software Control: If your motherboard supports ARGB sync, utilizing its software can offer more advanced lighting customization options beyond the remote control.

9. Warranty and Support

The Aigo AR12 fan is certified by CE, FCC, and RoHS, ensuring it meets international safety and environmental standards.

For further assistance or detailed information, please refer to the official user manual available in PDF format: Aigo AR12 User Manual (PDF).

For product support, please contact your retailer or the Aigo official store.

© 2024 Aigo. All rights reserved.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.