1. Introduction
The Big Dipper LP001 RGBW LED Par Light is a professional stage lighting fixture designed for various events, parties, weddings, bars, and disco applications. Featuring 60*3W RGBW LEDs, it delivers powerful and vibrant full-color lighting effects. This manual provides essential information for the safe and effective use of your LP001 LED Par Light.
2. Safety Information
- Always connect the unit to a grounded power outlet.
- Ensure proper ventilation around the fixture to prevent overheating.
- Do not look directly into the light source when the fixture is operating, as it may cause eye damage.
- Disconnect from power before cleaning or servicing.
- Installation should be performed by qualified personnel, especially when hanging the fixture.
- Keep the device away from rain, moisture, and extreme temperatures.
3. Package Contents
Verify that all items are present and in good condition upon unpacking:
- 1 x LP001 RGBW LED Par Light
- 2 x Mounting Brackets
- 2 x Screws
- 1 x User Manual (this document)
4. Product Overview and Features
The LP001 LED Par Light is designed for high performance and durability. Key features include:
- Light Source: 60*3W RGBW LEDs (12 Red, 18 Green, 18 Blue, 12 White) for full-color mixing.
- High Brightness: 180W rated power ensures powerful illumination.
- Efficient Heat Dissipation: Constructed with an aluminum shell and active cooling for optimal thermal management and extended lifespan.
- Versatile Mounting: Dual metal mounting brackets allow for hanging on trusses, wall installation, or ground placement.
- Long Lifespan: LED source lifetime up to 50,000 hours.
5. Setup
5.1 Mounting
The LP001 comes with dual metal mounting brackets. These can be used to:
- Hang the fixture from a truss using appropriate clamps (not included).
- Mount the fixture to a wall or ceiling using the provided screws and suitable anchors.
- Place the fixture on the ground as an uplight or for floor effects.
Always ensure the mounting surface or structure can safely support the weight of the fixture.
5.2 Connections
The rear panel of the LP001 features power and DMX connections:
- Power In/Out: Connect the power cable to the 'Power In' port. The 'Power Out' port allows for daisy-chaining power to up to 8 units (at 100VAC) or 16 units (at 220VAC) from a single power outlet.
- DMX In/Out: Use standard 3-pin DMX cables to connect to a DMX controller or to daisy-chain multiple fixtures for DMX control.
6. Operating Instructions
The LP001 can be operated in several modes using the digital display and buttons on the rear panel (Menu, Up, Down, Enter).
6.1 Control Modes
- Auto Mode: The fixture runs through pre-programmed light shows, including color transitions, gradients, chasing, and flashing effects. Use the display to select different auto programs or adjust speed.
- Sound Activated Mode: The light reacts to ambient sound or music, creating dynamic effects synchronized with the audio.
- DMX Mode: For professional control, connect the fixture to a DMX512 controller. The LP001 utilizes 9 DMX channels, allowing precise control over color, dimming, strobe, and other parameters. Refer to the DMX channel chart (usually provided in a separate DMX manual or on the product's display menu) for specific functions.
- Master-Slave Mode: Connect multiple LP001 units via DMX cables. Set one unit as the 'Master' and the others as 'Slave'. The slave units will mimic the master's operation, allowing synchronized lighting across multiple fixtures.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your LP001 LED Par Light.
- Cleaning: Periodically clean the lens and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents. Ensure the fixture is unplugged before cleaning.
- Inspection: Regularly check power cables, DMX cables, and mounting hardware for any signs of wear, damage, or loose connections. Replace damaged components immediately.
- Storage: When not in use, store the fixture in a dry, cool, and dust-free environment.
8. Troubleshooting
If you encounter issues with your LP001, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power / Light does not turn on | Power cable disconnected; No power from outlet; Blown fuse. | Check power cable connection; Test outlet with another device; Replace fuse if necessary. |
| No light output (but power is on) | Incorrect operating mode selected; DMX signal issue; Dimmer level set to zero. | Verify selected mode (Auto, Sound, DMX); Check DMX cable and controller settings; Increase dimmer level. |
| Incorrect colors or effects | Wrong DMX address or channel settings; Master-slave conflict; Incorrect auto program. | Adjust DMX address/channels; Ensure only one master unit in master-slave setup; Select a different auto program. |
| Light flickers or behaves erratically | Loose cable connection; DMX signal interference; Power fluctuations. | Check all power and DMX connections; Use DMX terminator; Ensure stable power supply. |
9. Specifications
| Feature | Specification |
|---|---|
| Model | LP001 |
| Light Source | 60*3W LED (12R 18G 18B 12W) |
| Rated Power | 180W |
| Input Voltage | AC100-240V, 50/60Hz |
| Control Modes | Auto, Sound Activated, DMX, Master-Slave |
| DMX Channels | 9 |
| Lifespan | 50,000 hours |
| Color Temperature (CCT) | 6000K (Daylight Alert) |
| Lamp Luminous Efficiency | 80 lm/w |
| Color Rendering Index (Ra) | 80 |
| Support Dimmer | Yes |
| Working Temperature | -20°C to 60°C |
| IP Rating | IP33 |
| Dimensions (H x W x D) | 295mm x 230mm x 220mm (approx. 11.6in x 9in x 8.66in) |
| Net Weight | 2.6kg / 5.73lb |
| Certification | CE |
10. User Tips
- Daisy-Chaining Power: Utilize the Power In/Out ports to connect multiple units to a single power source, simplifying cable management for larger setups.
- Versatile Placement: The dual mounting brackets make it easy to adapt the light for various uses, whether it's uplighting, stage washing, or hanging from a truss.
- Ease of Use: The LP001 is designed to be user-friendly for both professional lighting engineers and amateurs, with intuitive controls for quick setup and operation.
11. Warranty and Support
The Big Dipper LP001 RGBW LED Par Light comes with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product is free from defects in material and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact your retailer or the manufacturer directly. Please retain your proof of purchase for warranty service.