1. Introduction
The ISDT B80 is a high-performance intelligent balanced charger designed for advanced users requiring powerful and precise battery management. It features a robust 3000W (AC 220V) charging capacity and supports a wide range of battery types including LiFe, LiPo, LiHv, and ULiHv, with cell counts from 8S to 22S. Its single-channel output and advanced balancing capabilities make it ideal for charging large battery packs efficiently and safely.
2. Safety Information
- Always operate the charger in a well-ventilated area, away from flammable materials.
- Ensure correct battery type and cell count settings before charging to prevent damage or fire.
- Do not leave the charger unattended during operation.
- Keep the charger away from moisture, dust, and direct sunlight.
- Use only approved power cables and connectors.
- Avoid short-circuiting the output terminals.
- If the charger emits smoke, unusual odors, or excessive heat, immediately disconnect it from the power source and battery.
- This device is not a toy. Keep out of reach of children.
3. Product Overview
The ISDT B80 charger is built with an aluminum alloy body for enhanced durability and heat dissipation. It features a clear interface for easy operation and monitoring.

The front panel includes a Balance Port, Charge Port, Power button, Mode button, and Start/Stop button for intuitive control.
Key Features:
- High Power Output: Up to 3000W charging power for rapid charging of large batteries.
- Wide Cell Count Support: Directly charges 8-22S batteries without requiring an external adapter.
- Wireless Connectivity: Allows setting charging parameters and performing OTA firmware upgrades via a mobile application.
- Durable Construction: Aluminum alloy body provides robust protection and efficient heat management.
- Comprehensive Safety Features: Includes abnormal voltage alarm, incorrect cell count setting alarm, and BattAir support.
4. Specifications
The following table details the technical specifications of the ISDT B80 charger:
| Feature | Specification |
|---|---|
| Model | B80 |
| Input Voltage Range | AC 100~240V |
| Output Voltage Range | DC 20~80V |
| Maximum Input Current | AC 16A |
| Maximum Charging Power | 3000W (@220V AC) 1500W (@110V AC) 1400W (@100V AC) |
| Maximum Discharge Power | 200W |
| Supported Battery Types & Cell Count | LiFe (8~22S), LiPo (6~18S), LiHv (6~18S), ULiHv (6~18S) |
| Charging Current | 1.0~40.0A (Max) |
| Discharging Current | 0.5~5.0A (Max) |
| Balance Current | 2A/Cell Max |
| Abnormal Voltage Alarm | Support |
| Incorrect Cell Count Setting Alarm | Support |
| BattAir | Support |
| Working Temperature | 0~40℃ |
| Storage Temperature | -20~60℃ |
| Dimension | 356 × 136.8 × 164.1 mm |
| Weight | About 3973g |

This image provides a visual summary of the charger's capabilities, including its support for up to 22S batteries, wireless control, and robust aluminum construction.
5. Setup
- Unpack: Carefully remove the charger and all accessories from the packaging. Inspect for any damage.
- Power Connection: Connect the charger to an appropriate AC power source (100-240V) using the provided power cable. Ensure the power outlet can handle the charger's maximum input current (16A).
- Battery Connection: Connect your battery to the charger's Charge Port. For balanced charging, also connect the battery's balance lead to the Balance Port. Ensure all connections are secure and correctly polarized.
- Initial Power On: Press the Power button to turn on the charger. The display will illuminate.
6. Operating Instructions
- Select Battery Type: Use the 'Mode' button to navigate through the menu and select the correct battery type (LiFe, LiPo, LiHv, ULiHv) and cell count (e.g., 8S, 18S, 22S) that matches your connected battery.
- Set Charging Parameters: Adjust the charging current (1.0-40.0A Max) and other relevant parameters according to your battery manufacturer's recommendations.
- Start Charging: Once all parameters are set, press the 'Start/Stop' button to begin the charging process. The charger will display real-time charging status, including voltage, current, and capacity charged.
- Monitor Charging: Periodically monitor the charging process. The charger includes safety features like abnormal voltage alarm and incorrect cell count setting alarm.
- Stop Charging: To stop charging at any time, press the 'Start/Stop' button. The charger will automatically stop when the battery is fully charged or if an error is detected.
- Wireless Control (App): For advanced control and monitoring, download the official ISDT app. Connect your charger to the app to set charging parameters, monitor progress, and perform firmware updates (OTA upgrade).
7. Maintenance
- Cleaning: Regularly clean the charger's exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners. Ensure ventilation openings are free from dust and debris.
- Storage: Store the charger in a cool, dry place, away from direct sunlight and extreme temperatures (-20~60℃).
- Firmware Updates: Check for and install firmware updates via the mobile app to ensure optimal performance and access to new features.
- Cable Inspection: Periodically inspect all cables and connectors for signs of wear or damage. Replace any damaged components immediately.
8. Troubleshooting
- Charger Not Powering On: Check the AC power connection and ensure the power cable is securely plugged into both the charger and the wall outlet.
- Charging Not Starting: Verify that the battery type and cell count settings match the connected battery. Ensure all battery connections (charge and balance ports) are secure.
- Error Messages: Refer to the charger's display for specific error codes or messages. Common errors include abnormal voltage or incorrect cell count settings. Recheck your battery and settings.
- Overheating: Ensure the charger is in a well-ventilated area and its cooling fans are not obstructed. Reduce the charging current if overheating persists.
- App Connectivity Issues: Ensure Bluetooth or Wi-Fi (if applicable) is enabled on your mobile device and the charger. Restart both the app and the charger if connection fails.
9. User Tips
- Always prioritize safety. Double-check all connections and settings before initiating a charge cycle.
- For optimal battery life, avoid consistently charging at the maximum current unless necessary.
- Regularly balance your battery packs, especially multi-cell configurations, to maintain cell health and performance.
- Keep your charger's firmware updated to benefit from the latest features and bug fixes.
- When storing batteries for extended periods, charge them to a storage voltage as recommended by the battery manufacturer.
10. Warranty and Support
For any technical assistance, warranty claims, or support inquiries, please contact the seller directly. Provide your product model (B80) and a detailed description of the issue.
Contact Information:
- Phone/WeChat/WhatsApp: +8618359272733
- Email: 1114029125@qq.com