1. Introduction
The Wofea WiFi Smart Garage Door Opener Controller (Model WG-088) allows you to remotely monitor and control your garage door using a smartphone application. It integrates with popular voice assistants like Amazon Alexa and Google Assistant, providing convenient voice control. This manual provides detailed instructions for installation, operation, and troubleshooting to ensure optimal performance of your smart garage door controller.
2. Compatibility Check
Before installation, it is crucial to verify if your existing garage door opener is compatible with the Wofea Smart Garage Door Controller. Follow these steps:
- Locate the wall button terminal on your garage door opener.
- Take a wire with both ends stripped or a straightened paper clip.
- Short-circuit the wall button terminal (often marked with red color).
- If the garage door opens or closes, your opener is compatible with this smart controller.

3. Specifications
| Attribute | Specification |
|---|---|
| Brand Name | Wofea |
| Model Number | WG-088 |
| Origin | Mainland China |
| Certification | CE |
| Work Voltage | DC12~24V |
| Wireless Standard | IEEE802.11b/g/n |
| Wireless Type | Only 2.4GHz (5G not supported) |
| Mobile Phone APP | Tuya / SmartLife (for Android & iOS) |
| Voice Assistant Support | Alexa Amazon Echo, Google Assistant |
| Sensor Action Distance | 3-15mm |
| Garage Door Detector Wire Length | 5M |
| Material | ABS+PC |
| Installation Method | With Screws/Stickers |
| Encoding Method | Fixed code |
4. Installation and Setup
4.1. Wiring the Controller
The Wofea Smart Garage Door Controller operates on DC12-24V. Ensure your garage door opener provides compatible power output or use an appropriate power adapter (not included if your opener doesn't provide DC power).

Connect the controller to your garage door motor based on its power output:
Option 1: Garage Door Motor with DC24V Output
If your garage door opener has a DC24V output, connect the black and red wires of the controller to the DC24V and GND terminals of your opener. The white and yellow wires connect to the same terminals as the push button.

Option 2: Garage Door Motor without DC24V Output
If your garage door opener does not have a DC24V output, you will need an external DC12-24V power source. Connect the red and black wires of the controller to this external power source. The white and yellow wires connect to the same terminals as the push button on your garage door opener.

4.2. Wired Door Sensor Mounting
Install the wired door sensor on your garage door. Find a proper position to mount the sensor, ensuring the following:
- You can use the included double-sided adhesive tapes, screws, or brackets for sensor fixation.
- When the garage door is closed, the distance between the two sensor parts must be less than 20mm.
- When the garage door is open, the two sensor parts must be well separated.

5. Mobile App Setup
The Wofea Smart Garage Door Controller works with the Tuya Smart or Smart Life application. Download the app from your device's app store.

5.1. Adding the Device to the App
- Ensure your garage door is closed before starting the pairing process, as the garage door will be activated when successfully added (when the blue LED light stops blinking).
- Power up the garage door controller. The red and blue LED lights on the controller will flash alternatively.
- Launch the "Smart Life" or "Tuya Smart" app on your smartphone.
- Tap the '+' icon in the top right corner to add a new device.
- Select "All Devices", then choose the "Wi-Fi Connector" type.
- Tap "Confirm indicator rapidly blink" in the app.
- Input your correct 2.4G Wi-Fi password (5G networks are not supported). Then, tap "Confirm".
- The app will auto-connect with the device. Once the process is completed, you will be prompted to rename the device. Enter a new name and press 'Save'.
6. Operating the Controller
6.1. App Control
You can open or close your garage door directly from the Tuya Smart or Smart Life app. The app provides real-time status updates, allowing you to see if the garage door is open or closed.


6.2. Voice Control
The controller supports voice commands via Amazon Alexa and Google Assistant. After binding the device with your voice assistant, you can use commands like "Alexa, open garage door" or "Hey Google, open my garage." Note that some Alexa versions in different regions may not support the voice code protection feature shown in promotional videos.


6.3. Schedules and Countdown
- Schedules: Set specific times for your garage door to automatically open or close. This feature ensures your garage operates according to your routine.
- Countdown: Use the countdown function to temporarily open or close the garage door for a set duration. This is useful for temporary access, such as for a delivery person. The door will automatically close after the countdown.


6.4. Notifications and History
- App Message Push: Receive instant notifications on your smartphone when your garage door opens or closes, no matter where you are.
- History Record: The app maintains a history log of all garage door open/close events, allowing you to review past activity.

6.5. Device Sharing
You can share control of the garage door controller with family members. After they register a Tuya account, you can authorize device control to them via the "Share Device" function in the app.

7. Maintenance
- Keep the controller and sensor clean and free from dust and debris.
- Periodically check the wiring connections to ensure they are secure.
- Ensure the wired door sensor remains properly aligned and the gap between its two parts is within the specified range (less than 20mm when closed).
- Regularly update the Tuya Smart or Smart Life app to the latest version for optimal performance and security.
8. Troubleshooting
- Device not connecting to Wi-Fi: Ensure your Wi-Fi network is 2.4GHz. The controller does not support 5G Wi-Fi. Check your Wi-Fi password and signal strength.
- Garage door not responding: Verify all wiring connections are correct and secure. Perform the compatibility test again to ensure your garage door opener is compatible. Check the power supply to the controller.
- Sensor not detecting status: Ensure the sensor parts are aligned correctly and the gap is less than 20mm when the door is closed. Clean any obstructions around the sensor.
- How to reset the product: To reset the product, typically you would press and hold the reset button (if available) or follow the app's instructions for device removal and re-pairing. Refer to the app's specific device settings for detailed reset procedures.
- Voice control issues (e.g., no PIN code): Note that Alexa app versions and regional settings may vary, and some regions might not have the PIN code function for opening the garage door via voice as shown in some demonstrations.
9. User Tips
- Open Door Alarm: Utilize the app's feature to set an alarm if your garage door remains open for an extended period. This provides an extra layer of security and reminds you to close the door.

10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the seller's official website or contact their customer service directly. Keep your purchase receipt for any warranty claims.