PowMr POW-HVM6.2M-48V-N / POW-HVM4.2M-24V-N

Contents

PowMr MPPT Hybrid Solar Inverter User Manual

Models: POW-HVM6.2M-48V-N & POW-HVM4.2M-24V-N

1. Introduction

This PowMr MPPT Hybrid Solar Inverter is a multi-function inverter/charger designed to provide uninterruptible power support. It integrates the functions of an inverter, solar charger, and battery charger into a portable unit. The comprehensive LCD display allows for user-configurable settings, including battery charging current, AC/solar charger priority, and acceptable input voltage, adapting to various applications.

The inverter supports both off-grid and on-grid operations and features dual AC output. It is a powerful solution for efficient solar energy utilization, maximizing solar input up to 6500W (for 6.2KW model) and supporting a wide PV input voltage range of 90-500Vdc.

Video 1: Product Unboxing and Overview of the PowMr Hybrid Solar Inverter.

2. Key Features

  • Pure sine wave output.
  • Configurable input voltage range for various applications (home appliances, personal computers).
  • Adjustable battery charging current via LCD settings.
  • Configurable AC/Solar Charger priority via LCD settings.
  • Compatible with both mains voltage and generator power.
  • Automatic restart function upon AC recovery.
  • Comprehensive protection against overload, over temperature, and short circuits.
  • Smart battery charger design for optimized battery performance.
  • Cold start function for reliable operation.
  • Supports both grid-connected and off-grid use.
  • Dual AC Output capability.

3. Setup and Installation

Proper installation is crucial for the safe and efficient operation of your PowMr Hybrid Solar Inverter. Please follow all local electrical codes and safety guidelines.

3.1 System Overview

Hybrid Power System Diagram

Figure 1: Hybrid Power System Diagram. This diagram illustrates the connections between solar panels, generator, utility grid, battery, and home appliances.

3.2 Component Identification

Familiarize yourself with the inverter's physical layout and connection points:

Inverter Front and Rear View

Figure 2: Front and Rear views of the inverter, showing the display, ventilation, and connection terminals.

Inverter Top and Side View

Figure 3: Top and Side views of the inverter, highlighting additional ports and cooling features.

3.3 Battery Connection

The inverter is compatible with various battery types, including Lifepo4, Lithium, Flooded, Gel, and Lead-acid batteries. Ensure the correct battery voltage (24V for 4.2KW models, 48V for 6.2KW models) is used and properly connected.

Compatible Battery Types

Figure 4: Illustration of compatible battery types (AGM, GEL, FLD, LI, SLD, USER) and the maximum battery charging current of 120A.

When using lithium batteries, if solar energy is present, set the battery type to 'LI'. The lithium battery will be activated by solar energy after 3 seconds.

4. Operating Modes

The inverter offers multiple charging and output modes to suit different energy management needs:

Multiple Charging and Output Modes

Figure 5: Diagram showing various charging and output modes: Solar priority, Solar+Utility, Only solar, SBU mode, and Utility priority.

4.1 Charging Modes

  • Solar Priority: Solar power is the primary source for charging batteries and supplying loads.
  • Solar + Utility: Solar power is prioritized, with utility power used as a supplement when solar is insufficient.
  • Only Solar: Only solar power is used for charging and loads.

4.2 Output Modes

  • Utility Priority: Utility power is the primary source for loads, with the inverter providing backup.
  • SBU Mode (Solar-Battery-Utility): Solar power is prioritized, then battery power, and finally utility power as a last resort.

These modes can be configured via the LCD display settings to optimize energy flow based on your specific requirements.

5. Maintenance

Regular maintenance ensures the longevity and optimal performance of your inverter.

  • Cleaning: Periodically clean the exterior of the inverter. The inverter is equipped with a demountable insect screen for easy cleaning of internal components and fans. Ensure the unit is powered off and disconnected from all power sources before cleaning.
  • Inspection: Regularly inspect all wiring connections for tightness and signs of corrosion. Check for any physical damage to the inverter casing or cables.
  • Ventilation: Ensure that the ventilation openings are clear and unobstructed to prevent overheating.
  • Battery Health: Monitor battery health and charge levels. Refer to your battery manufacturer's guidelines for specific maintenance procedures.

6. Troubleshooting

The PowMr Hybrid Solar Inverter includes built-in protection features to ensure efficiency and safety. If you encounter issues, refer to the following common problems and their solutions.

6.1 Protection Features

360 Degree Protection Features

Figure 6: The inverter offers 360° protection against various conditions including Short Circuit, Over-Load, Over Current, Backfill, Over Voltage, Over-Temperature, Under Voltage, and Over Charge.

6.2 Common Issues

  • No Output Power: Check all input and output connections. Ensure batteries are adequately charged and connected. Verify that the inverter is turned on.
  • Overload Protection Triggered: Reduce the load connected to the inverter. The inverter will automatically restart once the overload condition is resolved (if configured).
  • Over Temperature Warning: Ensure adequate ventilation around the inverter. Clean any dust or debris from the cooling fans and vents.
  • Inverter Not Charging Batteries: Check solar panel connections and output. Verify utility grid connection if AC charging is enabled. Review LCD settings for charging priority and current.
  • Inverter Not Switching to AC: Check the utility grid connection and voltage. Ensure the 'AC/Solar Charger priority' setting is correctly configured.

For persistent issues, please contact PowMr customer support.

7. Specifications

Below are the detailed specifications for the PowMr MPPT Hybrid Solar Inverter models POW-HVM4.2M-24V-N and POW-HVM6.2M-48V-N.

7.1 General Specifications

  • Brand Name: PowMr
  • Model Numbers: POW-HVM6.2M-48V-N, POW-HVM4.2M-24V-N
  • Output Current: MPPT 120A
  • Output Power: 1 - 200 KW (general range)
  • Size: 437x390x130 mm
  • Output Type: SINGLE
  • Weight: 11KG
  • Output Frequency: 50HZ/60HZ
  • Is Smart Device: Yes
  • Origin: Mainland China
  • Certification: CE
  • Product Type: Hybrid solar inverter / photovoltaic hybrid inverter
  • Charging Type: Pure sine wave inverter
  • Applications: Solar panel/photovoltaic panel, Factory equipment, commercial load, industrial machinery, Household appliances, farm tools.
  • Applicable Area: Asia, Europe, Africa and North America (220-240VAC drivers).

7.2 Detailed Electrical Specifications

Table 1: Line Mode Specifications
ParameterPOW-HVM4.2M-24V-NPOW-HVM6.2M-48V-N
Input Voltage WaveformPure Sine Wave (Utility or Generator)
Nominal Input Voltage230Vac
Max AC Input Voltage300Vac
Efficiency (Line Mode)>95% (Rated R load, battery full charged)
Transfer Time10ms typical (UPS); 20ms typical (Appliances)
Table 2: Inverter Mode Specifications
ParameterPOW-HVM4.2M-24V-NPOW-HVM6.2M-48V-N
Rated Output Power4.2KW6.2KW
Output Voltage WaveformPure Sine Wave
Output Voltage Regulation230Vac±5%
Output Frequency50HZ
Peak Efficiency0.93
Overload Protection3s@≥150% load; 5s@101%~150% load
Surge Capacity2* rated power for 5 seconds
Nominal DC Input Voltage24Vdc48Vdc
Cold Start Voltage23.0Vdc46.0Vdc
No Load Power Consumption30W50W
Table 3: Charge Mode Specifications
ParameterPOW-HVM4.2M-24V-NPOW-HVM6.2M-48V-N
Utility Charging Mode
Charging Algorithm3-Step
AC Charging Current (Max)100A100A
MPPT Solar Charging Mode
Max. PV Array Power6200W6500W
Nominal PV Voltage240Vdc360Vdc
PV Array MPPT Voltage Range60Vdc~450Vdc90Vdc~500Vdc
Max. PV Array Open Circuit Voltage500Vdc
Max Charging Current (AC charger plus solar charger)120A120A
Table 4: Grid-Tie Operation
ParameterPOW-HVM4.2M-24V-NPOW-HVM6.2M-48V-N
Nominal Output Voltage220/230/240VAC
Feed-in Grid Voltage Range195-253VAC
Feed-in Grid Frequency Range49-51±1Hz/59-61±1Hz
Nominal Output Current18.2A26.9A
Maximum Conversion Efficiency (DC/AC)97%
Table 5: Two Load Output Power
ParameterPOW-HVM4.2M-24V-NPOW-HVM6.2M-48V-N
Full Load4200W6200W
Maximum Main Load4200W6200W
Maximum Second Load (battery model)1400W2066W
Main Load Cut Off Voltage26VDC52VDC
Main Load Return Voltage27VDC54VDC

8. User Tips

  • Output Voltage Adjustment: If you need to adjust the output voltage (e.g., to 110V), please consult the detailed product manual or contact technical support. The inverter's output voltage is typically fixed at 220-240VAC.
  • Battery Configuration: For optimal performance and safety, always refer to the specifications for the correct number, type, and voltage of batteries to connect. For example, for a 4.2 kW inverter, ensure your battery bank (e.g., two 24V 200 A/h batteries) is compatible with the inverter's input requirements.
  • WIFI Module: Models with WIFI support allow for remote monitoring and control. Ensure proper setup of the WIFI module as per the separate instructions provided with the module.

9. Warranty and Support

Your PowMr Hybrid Solar Inverter comes with a 1-Year Warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact PowMr customer support through the seller's platform or official website. Provide your product model number and a detailed description of the issue to expedite support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.