1. Introduction
This manual provides detailed instructions for the installation, setup, operation, and maintenance of your DOOYA DM25TE Smart Tubular Motor. This motor is designed for smart blinds and curtains, offering convenient control options including voice commands via Google Home, Alexa, and Alice App. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Video: Product overview and demonstration of the DOOYA Smart Tubular Motor.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the product:
- Ensure the power supply is disconnected before performing any installation, wiring, or maintenance.
- Installation should be performed by qualified personnel in accordance with local electrical codes.
- Do not expose the motor to moisture or extreme temperatures.
- Keep children and pets away from moving blinds/curtains.
- Do not attempt to modify or repair the motor yourself. Contact support for assistance.
3. Package Contents
Please check that all items are present in your package:
- DOOYA DM25TE Tubular Motor
- Control Module (e.g., DC1545V, DC1545R, or similar, depending on selected module)
- Remote Control (DOOYA branded)
- Drive Adapter
- Crown
- Brackets
- User Manual (this document and/or a PDF version)

Image: Main components of the DOOYA Smart Tubular Motor system.
4. Specifications
| Feature | Specification |
|---|---|
| Model | DM25TEQ-1.1/20 |
| Type | Tubular Motor |
| Output Power | <18.65 |
| Torque | 1.1 Nm |
| Speed | 20 r/min |
| Voltage | 100-240V AC |
| Frequency | 50/60 Hz |
| Max Current | 0.3 A |
| Operating Time | S2: 12 min |
| Protection Rating | IP20 |
| Motor Diameter | Ø 25 |
| Wireless Functionality | Yes |
| Efficiency | IE 4 |
| Control Range (Outdoor) | 200m |
| Control Range (Indoor) | 35m |
| Emission Frequency | 433.92/868 MHz |
| Certification | CCC, CE |
Note: The effective transmitting distance may vary due to environmental factors.
5. Setup and Installation
Follow these steps for proper installation of your tubular motor.
5.1 Drive Adapter and Crown Installation
- Install the crown through the crown and inner gear wheel.
- Attach the drive adapter to the motor.

Image: Drive adapter and crown installation diagram.
5.2 Bracket Installation
Securely mount the motor using the provided brackets. Ensure the motor is level and properly aligned with the blind/curtain mechanism.

Image: Bracket installation diagram.
5.3 Wiring
Connect the motor to the power supply according to the following color codes:
- Blue: Neutral
- Brown: Live
Ensure all connections are secure and insulated.

Image: Motor wiring example with DC1545R module.
6. Operation
This section details how to set up and operate your DOOYA Smart Tubular Motor with a remote control.
6.1 Remote Control Button Specification
Familiarize yourself with the remote control buttons:
- Setting Button (P2): Used for pairing and setting limits.
- UP Button: Moves the blind/curtain up.
- STOP Button: Stops the blind/curtain movement.
- DOWN Button: Moves the blind/curtain down.
For emitters without a dedicated setting button (like DC1650), pressing the UP button and STOP button simultaneously can serve the same function as the setting button.

Image: DOOYA remote control.

Image: Remote control button layout and setup instructions.
6.2 Setting Up (Pairing Emitter)
To pair an emitter with the motor:
- Power on the motor. The motor will run for a hint (a short movement).
- Press the setting button (P2) on the remote control once. The motor will beep once.
- Press the UP button once. The motor will beep 6 times.
- The setup is complete. The UP limit button will now control the motor clockwise.
- To set the DOWN limit, repeat steps 1-3, but press the DOWN button instead of UP. The DOWN limit button will then control the motor clockwise.
Important: During settings, the time between two operations must be shorter than 10 seconds, otherwise the motor will exit the setting mode. If the motor has already been matched with a code, the memory will be cleared if you perform this process again.
6.3 Adding an Emitter
To add a new emitter (Emitter B) when Emitter A is already matched:
- Power on the motor.
- On Emitter A (already matched), press the Additional Function (P2) button once. The motor will beep once.
- Press the P2 button on Emitter A again. The motor will beep 5 times.
- On Emitter B (new emitter), press the P2 button once. The motor will beep once.
- Emitter B is now added.
6.4 Deleting an Emitter
To delete an emitter (or all emitters):
- Power on the motor.
- On the emitter you wish to delete, press the Additional Function (P2) button once. The motor will beep once.
- Press the STOP button once. The motor will beep once.
- Press the P2 button on the emitter again. The motor will beep 4 times.
- The emitter is now deleted. To delete all emitters, repeat this process for each paired emitter.
6.5 Dot-Move Setting
To enable or disable dot-move functionality:
- Power on the motor.
- Press the Additional Function (P2) button once. The motor will beep once.
- Press the UP button once. The motor will beep once.
- Press the DOWN button once. The motor will beep 4 times.
- Dot-move setting is now active/inactive.
6.6 Setting Up/Down Limit Positions
It is crucial to set the limit positions before regular use. The motor will not function correctly without defined limits.
- Adjusting Limits: While the motor is moving up or down, press the setting button once to enter step-moving status. Press it again to exit. In step-moving status, the motor moves in small increments, allowing for precise limit adjustment.
- Setting UP Limit: Power on the motor. Press P2, then UP. The motor will beep once. Confirm the blind stops at the desired UP limit position. Press STOP. The motor will beep 3 times.
- Setting DOWN Limit: Press P2, then DOWN. The motor will beep once. Confirm the blind stops at the desired DOWN limit position. Press STOP. The motor will beep 5 times.
Important: The UP and DOWN limits cannot be set at the same physical location. After setting, the limits are saved even if power is removed. If you change the motor's direction, you must reset the limit points.
6.7 Setting the Third Limit Position (Half-Open)
After setting the UP and DOWN limits, you can define a third limit point, typically for a half-open position.
- With UP and DOWN limits already set, move the blind to the desired third limit position.
- Press the Additional Function (P2) button once. The motor will beep once.
- Press the STOP button once. The motor will beep 4 times.
- The third limit position is now successfully set.
Note: The third limit point will be cancelled if you delete the main limits or re-pair the motor.
7. Maintenance
- Regularly inspect the motor and wiring for any signs of wear or damage.
- Keep the motor free from dust and debris. Use a soft, dry cloth for cleaning.
- Do not use harsh chemicals or abrasive cleaners.
- Ensure the blinds/curtains operate smoothly without obstruction to prevent strain on the motor.
8. Troubleshooting
If you encounter issues with your DOOYA Smart Tubular Motor, try the following:
- Motor not responding: Check power connections. Ensure the remote control batteries are not depleted. Try re-pairing the emitter.
- Motor runs in wrong direction: If the motor runs in the wrong direction after initial setup, you need to reset the limit points.
- Limits not holding: Ensure the limit setting procedure was followed correctly. If issues persist, try deleting and re-setting the limits.
- Intermittent control: Check for potential interference sources (e.g., other wireless devices). Ensure the remote is within the effective control range (200m outdoor, 35m indoor).
For further assistance, please refer to the official user manual PDF or contact customer support.
9. User Tips
- When using group control mode, note that setting up, deleting programs, and setting limits are not functional. Perform these actions in single-channel mode.
- One motor can store a maximum of 20 rolling channels. If you add more, the oldest channels will be overwritten.
- For precise limit adjustments, utilize the step-moving status by pressing the setting button during motor movement.
10. Warranty and Support
For detailed warranty information and technical support, please refer to the official DOOYA documentation or contact your retailer. A comprehensive user manual is also available in PDF format for download: DOOYA Smart Motor User Manual (PDF).