1. Introduction
Thank you for purchasing the YUER 200W LED Moving Head Light. This professional stage lighting fixture is designed to create dynamic and vibrant lighting effects for various events, including DJ performances, stage shows, discos, and bars. It features powerful beam and spot capabilities, rotating prisms, and a rainbow effect to enhance any atmosphere. Please read this manual thoroughly before operation to ensure safe and optimal performance.
2. Safety Information
- Always connect the fixture to a grounded circuit to avoid the risk of electrocution.
- Ensure the voltage and frequency of the power supply match the fixture's requirements (AC110-220V, 50-60HZ).
- Do not operate the fixture if the power cord is damaged.
- Keep the fixture away from rain, moisture, and extreme temperatures.
- Maintain a minimum distance of 1 meter from flammable materials.
- Do not look directly into the light source when the fixture is operating.
- Ensure proper ventilation around the fixture to prevent overheating.
- Only qualified personnel should perform installation, maintenance, or repairs.
3. Product Overview
Figure 1: Front view of the YUER 200W Moving Head Light.
Figure 2: Side view of the YUER Moving Head Light.
Figure 3: Rear panel showing DMX input/output and power connections.
4. Specifications
| Feature | Specification |
|---|---|
| Voltage | AC110-220V, 50-60HZ |
| Power Consumption | 250W (Max) |
| Light Source | 1x 200W White Light Lamp Bead |
| Patterns | 12 patterns |
| Colors | 8 colors |
| Rainbow Effect | 6-color rainbow effect |
| Prism | 6+12 prism |
| Spot Angle | 2° |
| DMX Channels | 11/13CH |
| Control Modes | Voice control, Master-slave, Self-propelled, DMX |
| Pan (X-axis) | 540° |
| Tilt (Y-axis) | 180° |
| Luminous Flux | 249-2000 |
| Installation Method | Self-contained |
| Certification | CE |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
| Dimensions (L x W x H) | 35cm x 26cm x 29cm (Packing Size) |
| Gross Weight | 3.5KG |
Figure 4: Product Dimensions (approximate).
5. Package Contents
Upon opening the package, please verify that all components are present and in good condition:
- 1x YUER 200W LED Moving Head Light Fixture
- 1x Power Cable (EU/US/AU/UK Plug, depending on selection)
- 1x DMX Cable (optional, may not be included in all packages)
- 1x Instruction Manual (this document)
6. Setup
6.1 Mounting
- The fixture is designed for self-contained installation. Ensure the mounting surface or truss is capable of supporting the fixture's weight (3.5KG).
- Use appropriate clamps and safety cables when mounting overhead.
- Ensure there is sufficient space around the fixture for ventilation and movement (Pan 540°, Tilt 180°).
6.2 Power Connection
- Connect the provided power cable to the power input on the rear panel of the fixture.
- Plug the other end of the power cable into a suitable AC110-220V, 50-60HZ power outlet.
- Ensure the power source is stable and grounded.
6.3 DMX Connection (for DMX Control Mode)
- Connect a DMX cable from your DMX controller's output to the DMX IN port on the first fixture.
- For multiple fixtures, daisy-chain them by connecting a DMX cable from the DMX OUT port of the first fixture to the DMX IN port of the next fixture, and so on.
- Terminate the last fixture in the DMX chain with a 120-ohm DMX terminator to prevent signal reflection.
7. Operating Instructions
The fixture can be operated in several modes:
7.1 Control Panel
The control panel on the front of the base features a digital display and several buttons (MENU, UP, DOWN, ENTER) for navigating settings and selecting modes.
7.2 DMX Control Mode
- Set the DMX address for each fixture using the control panel. Each fixture requires a unique starting address.
- Refer to the DMX channel chart (usually provided in a separate DMX manual or detailed specification sheet) to understand the functions controlled by each channel (e.g., Pan, Tilt, Color, Gobo, Prism, Strobe).
- Use your DMX controller to send commands and control the light's various features.
7.3 Master-Slave Mode
- Connect multiple fixtures via DMX cables.
- Set one fixture as the 'Master' and the others as 'Slave' units via the control panel settings.
- The Slave units will mimic the Master unit's movements and effects.
7.4 Self-Propelled Mode (Auto Mode)
- Select 'Auto' or 'Self-Propelled' mode from the control panel.
- The fixture will run through a series of pre-programmed light shows and effects automatically.
- Some models may allow adjustment of speed or specific auto programs.
7.5 Voice Control Mode (Sound Active)
- Select 'Sound Active' or 'Voice Control' mode from the control panel.
- The built-in microphone will detect ambient sound, and the light will react to the beat of the music.
- Adjust microphone sensitivity if available.
7.6 Effects Demonstration
Video 1: Demonstration of the YUER Moving Head Light's beam and pattern effects.
Figure 5: Examples of various light patterns and colors produced by the fixture.
Figure 6: More examples of light patterns and colors, including star and circle shapes.
8. Maintenance
- Cleaning: Regularly clean the lenses and housing with a soft, lint-free cloth. Do not use abrasive cleaners or solvents.
- Inspection: Periodically check all screws, connections, and cables for tightness and damage. Replace any worn or damaged parts immediately.
- Storage: When not in use, store the fixture in a dry, dust-free environment, preferably in its original packaging or a protective case.
- Lamp Replacement: The LED lamp bead is designed for long life and typically does not require user replacement. If a fault occurs, contact qualified service personnel.
9. Troubleshooting
- No Power: Check the power cable connection, power outlet, and ensure the fixture is switched on.
- No Light Output: Verify the fixture is receiving power and is not in blackout mode. Check DMX signal if applicable.
- Fixture Not Responding to DMX: Ensure DMX cables are correctly connected, DMX addresses are set correctly, and a DMX terminator is used on the last fixture. Check DMX controller output.
- Erratic Movement/Effects: This could be due to DMX signal interference. Check DMX cabling and termination. Ensure the fixture is not overheating.
- Sound Active Mode Not Working: Check the microphone sensitivity setting. Ensure there is sufficient sound for the fixture to react.
If problems persist, please contact your dealer or a qualified technician.
10. User Tips
- Experiment with DMX: For professional results, utilize DMX control to precisely program and synchronize light movements, colors, and effects.
- Optimal Placement: Consider placing multiple units to create layered effects and cover a wider area.
- Atmospheric Effects: Use with a fog or haze machine to enhance the visibility of the light beams and create stunning aerial effects.
11. Warranty and Support
This product comes with a standard manufacturer's warranty against defects in materials and workmanship. Please retain your proof of purchase for warranty claims. For technical support, service, or spare parts, please contact your original point of purchase or the manufacturer's customer service department. Do not attempt to repair the unit yourself, as this may void your warranty.
