Salange Universal Projector Stand

Contents

Salange Universal Projector Stand Instruction Manual

Model: Universal Projector Stand

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Salange Universal Projector Stand. Designed for versatility, this bracket can be configured as a ceiling mount, wall mount, or desktop stand, compatible with a wide range of projectors including XGIMI, JMGO, UNIC, DLP Mini Beamers, and LED Projectors. Its robust aluminum alloy construction and 360-degree rotation capability ensure optimal positioning for your projection needs.

Projector mounted on a Salange ceiling stand

Figure 1.1: Salange Universal Projector Stand in a ceiling mount configuration.

2. Features

  • Versatile Mounting Options: Easily converts between ceiling mount, wall mount, and desktop stand configurations.
  • Universal Compatibility: Equipped with a standard 1/4 inch (6mm) screw interface, suitable for most projectors, cameras, and monitors.
  • Adjustable Angle: Features full 360-degree rotation for precise positioning and flexible viewing angles.
  • Durable Construction: Made from high-quality aluminum alloy and plastic for stability and longevity.
  • Cable Management: Designed with internal routing options for a clean and organized setup (on some models).

3. Specifications

AttributeDetail
BrandSalange
Model NumberProjector Stand
MaterialAluminum alloy + Plastic
ColorSilver
Screw InterfaceUniversal 1/4 inch (6mm)
Maximum Load Capacity3 kg (for 20-40cm, 30-60cm, 40-80cm versions); 1.5 kg (for 22cm version)
High-concerned chemicalNone

Available Lengths:

  • 22cm Version: Fixed length, suitable for lighter devices up to 1.5 kg.
  • 20-40cm Version: Adjustable length, suitable for devices up to 3 kg.
  • 30-60cm Version: Adjustable length, suitable for devices up to 3 kg.
  • 40-80cm Version: Adjustable length, suitable for devices up to 3 kg.
Projector stand with specifications including 1/4 screw, 30-60cm extend, and max 3kg weight

Figure 3.1: Key specifications of the projector stand, highlighting the universal 1/4 inch screw interface, adjustable length (30-60cm shown), and maximum weight capacity of 3 kg.

22cm Projector Stand Dimensions

Figure 3.2: Dimensions and specifications for the 22cm version of the projector stand. Name: Wall Mount/Tripod/Stand, Material: Aluminum alloy, Diameter: 2cm, Color: Silver, Application: Projector/Monitor/Camera. Height: 22cm, Base Diameter: 9cm.

20-40cm Projector Stand Dimensions

Figure 3.3: Dimensions for the 20-40cm adjustable projector stand, illustrating its adjustable length from 20cm to 40cm.

30-60cm Projector Stand Dimensions

Figure 3.4: Dimensions for the 30-60cm adjustable projector stand, showing an adjustable length from 30cm to 60cm, with a total length of 63cm when fully extended, and a base diameter of 10.5cm.

4. Setup and Installation

The Salange Universal Projector Stand offers multiple installation methods. Please follow the instructions carefully for your chosen configuration.

4.1 Package Contents

Before installation, ensure all components are present:

  • Projector Stand Pole (length varies by model)
  • Mounting Base (for ceiling/wall) or Desktop Base (for stand)
  • 1/4 inch (6mm) Screw with adjustable head
  • Mounting hardware (screws, wall anchors)
Disassembled 22cm Projector Stand Components

Figure 4.1: Components of the 22cm projector stand, including the pole, base, adjustable screw head, and mounting screws/anchors.

Disassembled 30-60cm Projector Stand Components

Figure 4.2: Components of the 30-60cm projector stand, showing the adjustable pole, base, and screw head.

4.2 Mounting Options

The stand can be configured in three primary ways:

  1. Wall-hanging: Mount the base to a wall and attach the stand horizontally.
  2. Desktop Stand: Attach the base to the bottom of the pole for a stable desktop setup.
  3. Ceiling Mount: Mount the base to the ceiling and attach the stand vertically.
Installation Demonstration for Wall, Stand, and Ceiling Mount

Figure 4.3: Visual demonstration of the three installation methods: (1) Wall-hanging, (2) Desktop Stand, and (3) Ceiling Mount.

Wall Mount, Stand, and Ceiling Mount Configurations

Figure 4.4: Examples of the projector stand configured as a wall mount, desktop stand, and ceiling mount.

4.3 General Installation Steps (for Wall/Ceiling Mount)

  1. Choose Location: Select a sturdy wall or ceiling location capable of supporting the weight of the stand and your projector.
  2. Mark Drilling Points: Hold the mounting base against the desired surface and mark the screw hole positions.
  3. Drill Holes: Drill pilot holes at the marked positions. Use appropriate drill bits for your wall/ceiling material.
  4. Insert Anchors: If necessary, insert wall anchors into the drilled holes.
  5. Secure Base: Attach the mounting base to the wall/ceiling using the provided screws. Ensure it is firmly secured.
  6. Assemble Stand: Screw the stand pole into the mounting base. For adjustable versions, extend or retract to the desired length and tighten the locking mechanism.
  7. Attach Projector: Screw your projector onto the 1/4 inch (6mm) screw interface at the end of the stand pole. Ensure it is securely fastened.
  8. Adjust Angle: Loosen the knob on the adjustable head, position your projector to the desired angle, and then tighten the knob to lock it in place.

Important: Ensure the projector's weight does not exceed the maximum load capacity of the stand (1.5 kg for 22cm version, 3 kg for others).

5. Operating Instructions

Once installed, the Salange Universal Projector Stand allows for easy adjustment of your projector's position.

  • Adjusting Length (Adjustable Models): For 20-40cm, 30-60cm, and 40-80cm versions, twist the locking collars on the pole to loosen, then extend or retract the pole to your desired length. Twist the collars back to tighten and secure the length.
  • Adjusting Projection Angle: The stand features a ball joint with a 1/4 inch screw interface. Loosen the knurled knob near the projector attachment point. Carefully tilt or rotate your projector to achieve the perfect projection angle. Once set, tighten the knob firmly to lock the position.
  • Cable Management: Some models include internal channels or clips for routing power and video cables along the stand pole, providing a cleaner aesthetic.
Close-up of Adjustable Head with 1/4 inch Screw

Figure 5.1: Close-up view of the adjustable head, showing the 1/4 inch screw and the knurled knob for angle adjustment.

Projector Stand with Cable Management

Figure 5.2: Example of a projector stand with integrated cable management, allowing cables to run through the pole for a tidy setup.

6. Maintenance

To ensure the longevity and optimal performance of your Salange Projector Stand, follow these simple maintenance guidelines:

  • Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn marks, use a slightly damp cloth with mild soap, then dry thoroughly. Avoid abrasive cleaners or solvents.
  • Check Fasteners: Periodically check all screws and connections to ensure they remain tight and secure. Re-tighten if necessary.
  • Inspect for Damage: Regularly inspect the stand for any signs of wear, corrosion, or damage. If any damage is found, discontinue use and replace the affected parts or the entire stand.
  • Load Capacity: Always adhere to the specified maximum load capacity to prevent damage to the stand or your projector.

7. Troubleshooting

This section addresses common issues you might encounter with your projector stand.

ProblemPossible CauseSolution
Projector is unstable or wobbles
  • Mounting screws are loose.
  • Projector not securely attached to the 1/4 inch screw.
  • Stand is overloaded (projector too heavy).
  • Mounting surface is not sturdy.
  • Check and tighten all mounting screws.
  • Ensure the projector is fully screwed onto the 1/4 inch interface.
  • Verify projector weight against stand's maximum load capacity.
  • Re-mount the stand to a more robust surface.
Cannot adjust the stand length (adjustable models)
  • Locking collars are too tight.
  • Internal mechanism is jammed.
  • Gently twist the locking collars counter-clockwise to loosen them before adjusting.
  • If jammed, apply gentle force while twisting. Do not force excessively.
Projector angle slips after adjustment
  • Adjustable knob is not tightened enough.
  • Ball joint mechanism is worn.
  • Ensure the adjustable knob is tightened firmly after setting the angle.
  • If the issue persists, the ball joint may be worn and require replacement.

8. User Tips

  • Versatile Use: This stand is not limited to projectors. Its universal 1/4 inch screw interface makes it suitable for mounting other devices like cameras or small monitors, especially in wall-mount or desktop configurations.
  • Cable Management: For a cleaner setup, utilize the internal cable routing options if your stand model supports them. This helps hide unsightly wires and prevents tangles.
  • Pre-assembly Check: Before drilling, temporarily assemble the stand and attach your projector to visualize the final position and ensure it meets your projection needs.

9. Warranty and Support

For warranty information, technical support, or replacement parts, please contact Salange customer service through your purchase platform. Keep your purchase receipt as proof of purchase.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.