1. Introduction
Thank you for choosing the AIKE AK2030S High-Speed Hand Dryer. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new hand dryer. The AK2030S is designed for commercial restrooms, offering fast and hygienic hand drying with advanced features like HEPA filtration and UV sterilization.
2. Important Safety Information
Please read all instructions carefully before installation and use. Keep this manual for future reference.
- Ensure the power supply matches the voltage requirements of the unit (110V or 220V).
- Installation must be performed by a qualified electrician in accordance with local electrical codes.
- Do not immerse the unit in water or other liquids.
- Do not operate the unit with a damaged cord or plug.
- Keep hands and foreign objects away from the air outlets during operation.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure that they do not play with the appliance.
- Disconnect power before performing any maintenance or cleaning.
- The unit is equipped with five safety protections: overtime protection, over-current protection, overheat protection, short circuit protection, and motor anti-blocking.
3. Product Features
- High-Speed Drying: Powerful brush motor dries hands within 7-10 seconds.
- Intelligent Temperature Control: Automatically adjusts heating system based on ambient temperature for comfortable drying in all seasons.
- LED Countdown Display: 10-second countdown for drying time, ensuring efficient use.
- UV Germicidal Lamp: Enhances hygiene by killing bacteria during operation.
- Advanced Air Filtration: Double-HEPA filter removes 99.97% of bacteria and dust particles as small as 0.3 microns from the air.
- Hidden Controls: Features a hidden switch for high/low air speed and intelligent heat system ON/OFF.
- Drain Tank with Level Window: Collects excess water, with a visible window for easy monitoring.
- Durable Construction: High-Impact ABS cover available in White and Silver finishes.
- Energy Efficient: Low 2.3W standby power to prevent energy waste.
4. Technical Specifications
| Attribute | Value |
|---|---|
| Model Number | AK2030s |
| Brand Name | AIKE |
| Origin | Mainland China |
| Voltage | 110V/220V (AC100-130V / AC220-240V) |
| Rated Power | 1750-2050W |
| Motor Type | Brush motor |
| Motor Power | 700W |
| Drying Time | 7-10 seconds |
| Air Speed | 95m/s |
| Case Material | High-Impact ABS Cover |
| Air Filtration | HEPA |
| Color Options | White/Silver |
| Air Temperature | 20-40℃ |
| Noise Level | 70dB @ 1m |
| Protection Class | Class II |
| Timing Protection | 25S |
| Dimensions (LxWxH) | 300x215x700mm (11.81"x8.46"x27.55") |
| Net Weight | Approx. 7.8kg |
| Certification | CB, CE, RoHS |
| Sensor | Yes |
| Application | Restrooms in restaurants, hotels, hospitals, factories, shopping malls, office buildings, etc. |
5. Setup and Installation
Professional installation by a qualified electrician is highly recommended.
- Choose Location: Select a suitable wall location in the restroom, ensuring adequate space around the unit for user access and maintenance. Refer to Figure 5 for dimensions.
- Mark Mounting Points: Use the provided mounting template (if available, otherwise measure carefully based on Figure 5) to mark the drilling points on the wall. Ensure the mounting height is appropriate for all users.
- Drill Holes: Drill holes at the marked points and insert wall anchors suitable for your wall type.
- Electrical Connection:
- Turn off the main power supply at the circuit breaker.
- Open the terminal box cover on the back of the hand dryer (refer to Figure 5 for location).
- Connect the electrical wiring (Live, Neutral, Ground) from the wall to the corresponding terminals inside the hand dryer. Ensure secure connections.
- Close the terminal box cover.
- Mount the Unit: Secure the hand dryer to the wall using the appropriate screws, ensuring it is firmly attached.
- Restore Power: Once installation is complete and all connections are secure, restore power at the circuit breaker.
6. Operating Instructions
The AIKE AK2030S hand dryer is designed for simple, automatic operation.
- Automatic Activation: Place your hands into the drying chamber. The infrared sensor will detect your hands and automatically activate the air flow.
- Drying Process: Move your hands slowly up and down within the drying chamber. The powerful air jets will quickly remove water from your hands. The LED display will show a 10-second countdown.
- Automatic Shut-off: The unit will automatically shut off once your hands are removed from the drying chamber or after the 25-second timing protection limit is reached.
Adjusting Settings (Hidden Switch)
The hand dryer features a hidden switch located at the bottom of the unit for adjusting air speed and heating.
- Heating System ON/OFF: Use the red switch to toggle the heating element. The intelligent temperature control system will manage heating automatically when enabled.
- High/Low Air Speed: Use the black switch to select between high and low air speed settings.
Note: Adjust these settings as needed for user comfort and energy efficiency.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your hand dryer. Always disconnect power before servicing.
- Exterior Cleaning:
- Wipe the exterior surface with a soft, damp cloth and mild detergent.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- HEPA Filter Maintenance:
- The double-HEPA filter should be inspected regularly and cleaned or replaced as needed.
- To access the filter, refer to the product diagram (Figure 3) for its location.
- Carefully remove the filter and clean it according to manufacturer guidelines (e.g., vacuuming or gentle rinsing if washable). Replace if heavily soiled or damaged.
- Drain Tank Emptying:
- Monitor the drain tank level through the level window (Figure 7).
- When the tank is full, carefully remove it from the bottom of the unit.
- Empty the collected water and clean the tank before reinserting it securely.
8. Troubleshooting
If you encounter issues with your hand dryer, refer to the table below for common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply. Circuit breaker tripped. Loose wiring connection. | Check power supply. Reset circuit breaker. Have a qualified electrician check wiring. |
| Air flow is weak or inconsistent. | Clogged HEPA filter. Air intake/outlet blocked. | Clean or replace HEPA filter. Ensure air intake/outlet are clear of obstructions. |
| Unit runs continuously or does not shut off. | Sensor obstruction. Sensor malfunction. | Clear any objects near the sensor. Contact customer support if issue persists. |
| LED display shows an error code. | Internal fault (e.g., overheat, motor anti-blocking). | Disconnect power for 5 minutes, then reconnect. If error persists, contact customer support. |
| Water leaks from the unit. | Drain tank full or improperly installed. | Empty and securely reinsert the drain tank. |
For problems not listed above or if solutions do not resolve the issue, please contact AIKE customer support.
9. User Tips
- For optimal drying, shake excess water from hands before placing them in the dryer.
- Move hands slowly and steadily through the air stream to ensure all surfaces are dried evenly.
- Regularly check the drain tank and HEPA filter to maintain hygiene and performance.
- Consider the "Low Air Speed" setting in quieter environments to reduce noise, especially during off-peak hours.
10. Warranty and Support
The AIKE AK2030S Hand Dryer comes with a 2-year warranty from the date of purchase, covering manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims.
For technical support, warranty service, or any questions regarding your product, please contact AIKE customer service through your retailer or the official AIKE website.
