1. Introduction
Thank you for choosing the Feyree EV Charger Adapter. This adapter is designed to enable electric vehicles with a GB/T charging port to utilize charging stations equipped with a Type 2 (IEC 62196-2) connector. It provides a reliable and efficient solution for expanding your charging options. Please read this manual carefully before using the adapter to ensure safe and optimal performance.
2. Safety Information
Always observe the following safety precautions to prevent injury or damage to the adapter or vehicle:
- Do not use the adapter if it is visibly damaged, cracked, or has exposed wiring.
- Ensure all connections are secure and fully inserted before initiating charging.
- Do not attempt to open, disassemble, or modify the adapter.
- Keep the adapter away from children and pets.
- Avoid submerging the adapter in water. While it is protected against water sprays, it is not designed for use in heavy rain or submerged conditions.
- Do not use the adapter with incompatible charging standards or vehicles.
- Always disconnect the adapter from the vehicle and charging station when not in use.
- If you experience any issues, discontinue use immediately and contact support.
3. Package Contents
Please check the package for the following items:
- 1 x Feyree EV Charger Adapter (Type 2 to GB/T)
- 1 x User Manual (this document)
4. Specifications
The Feyree EV Charger Adapter is engineered with the following technical specifications:
| Feature | Specification |
|---|---|
| Rated Current | 16A / 32A (Single/Three Phase) |
| Rated Voltage | 0-450V AC (Max 480V) |
| Standard | Type 2 (IEC 62196-2) to GB/T 20234 |
| Flammability Rating | UL94 V-0 |
| Insulation Resistance | ≥500MΩ (DC500V) |
| Contact Resistance | 0.5mΩ Max |
| Mating and Un-mating Force | 45N < F < 80N |
| Mechanical Life (Normal Use) | > 10000 Times |
| Working Temperature | -35°C ~ +55°C (-31°F ~ +131°F) |
| Shell Material | Thermoplastic Material |
| Connector Pin Material | Copper Alloy Silver Plating |
| IP Rating | IP55 (Working) |
| Dimensions (L x W x H) | 125mm x 69.5mm x 67mm (approx. 4.9in x 2.7in x 2.6in) |
| Weight | 0.5kg (approx. 1.1 lbs) |
| Power | 7KW / 22KW (depending on variant) |
For a visual representation of the product's detailed parameters, refer to the image below:
For product dimensions, refer to the diagram below:
5. Setup and Installation
The Feyree EV Charger Adapter facilitates the connection between a Type 2 (IEC 62196-2) charging station and a GB/T standard electric vehicle. Follow these steps for proper setup:
- Identify Connectors: Locate the Type 2 connector on your charging station and the GB/T charging port on your electric vehicle. The adapter has one end for Type 2 and the other for GB/T.
- Connect to Charging Station: Insert the Type 2 end of the Feyree adapter into the Type 2 connector of the charging station. Ensure it clicks securely into place.
- Connect to Vehicle: Insert the GB/T end of the Feyree adapter into the GB/T charging port of your electric vehicle. Ensure a firm connection.
- Verify Connection: Double-check that both ends of the adapter are fully and securely connected before proceeding to charge.
6. Operating Instructions
Once the adapter is securely connected between the Type 2 charging station and your GB/T vehicle, you can initiate the charging process:
- Initiate Charging: Follow the instructions of your specific Type 2 charging station to start the charging session. This usually involves activating the station via an app, RFID card, or payment terminal.
- Monitor Charging: Observe your vehicle's dashboard or the charging station's display to confirm that charging has begun and is proceeding normally. The adapter is designed to maintain the charging speed without reduction.
- End Charging: To stop charging, follow the procedure specified by your charging station (e.g., stop via app, press a button).
- Disconnect: Once charging is complete and the charging session has ended, disconnect the adapter first from the vehicle, then from the charging station. Always ensure the charging process is fully terminated before disconnecting to prevent arcing.
7. Maintenance
To ensure the longevity and proper functioning of your Feyree EV Charger Adapter, follow these maintenance guidelines:
- Cleaning: Wipe the adapter with a clean, dry cloth to remove dust and dirt. For stubborn grime, use a slightly damp cloth and ensure the adapter is completely dry before next use. Do not use harsh chemicals or abrasive cleaners.
- Storage: Store the adapter in a dry, cool place away from direct sunlight and extreme temperatures when not in use.
- Inspection: Periodically inspect the adapter for any signs of wear, damage, or corrosion on the connectors or casing. If any damage is found, do not use the adapter.
- Water Exposure: The adapter has an IP55 rating, protecting it from water sprays. However, it is not recommended for charging outdoors during heavy rain to prevent potential issues.
8. Troubleshooting
If you encounter issues while using your Feyree EV Charger Adapter, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Charging does not start | Loose connection, charging station error, vehicle not ready | Ensure all connections are secure. Restart the charging station. Check vehicle's charging status. |
| Slow charging speed | Charging station output limitation, vehicle setting, adapter variant | Verify the charging station's maximum output. Check vehicle charging settings. Ensure adapter variant (e.g., 7KW vs 22KW) matches expectations. |
| Adapter feels hot during charging | Normal operation, excessive load, poor connection | A slight warmth is normal. If excessively hot, discontinue use, check connections, and ensure current/voltage are within specifications. |
| Adapter does not fit | Incompatible port type | Ensure your charging station is Type 2 (IEC 62196-2) and your vehicle is GB/T. This adapter is not for other standards. |
9. User Tips
Based on common user inquiries and experiences, here are some helpful tips:
- Vehicle Compatibility: This adapter is designed to be compatible with most GB/T standard electric vehicles, supporting both 16A and 32A charging requirements. It has been noted to work with vehicles like the Wuling Mini EV (ensure you select the appropriate power variant, e.g., 3.5-7KW).
- Tesla Charger Compatibility: While this adapter converts Type 2 to GB/T, if you intend to use it with a Tesla charger, you may need an additional Type 2 to Tesla adapter, as Tesla chargers typically use a proprietary connector or a Type 2 connector in Europe. This product specifically converts Type 2 to GB/T.
- Port Identification: Familiarize yourself with the appearance of Type 2 and GB/T ports on your charger and vehicle to ensure correct connection.
10. Warranty and Support
Feyree products are manufactured to high-quality standards. For warranty information, technical support, or any product-related inquiries, please contact your retailer or the Feyree Official Store directly. Keep your purchase receipt as proof of purchase for warranty claims.
