1. Introduction
Thank you for choosing the CMTOOL Digital Vacuum Gauge. This high-precision instrument is designed for accurate vacuum measurement, featuring a backlight display, multiple selectable units, and an audible alarm. This manual provides detailed instructions for the safe and effective use, setup, operation, and maintenance of your device.
2. Product Overview
2.1 Key Features
- HD Backlight Display: 4.2CM x 4.8CM screen for clear data visibility in various lighting conditions.
- 13 Selectable Units: Supports multiple pressure units for versatile applications.
- High Accuracy: Professional micron-level sensor for precise measurements (±0.1%FS).
- Audible Beep Alarm: Alerts when pressure falls below a set threshold in monitoring mode.
- Battery Level Display: Real-time battery indicator for a 9V battery (included).
- Non-Slip Design: Rubberized sides for comfortable and secure handling.
- 4 Calibration Modes: Allows for accurate calibration.
- Monitoring and Measurement Mode: Switch between normal and monitoring modes.
- Standard Interface: Equipped with a standard connection interface.

Figure 1: CMTOOL Digital Vacuum Gauge highlighting key features such as audible alarm, high precision, backlit screen, 13 unit types, large LED screen, standard interface, 4 calibration modes, and monitoring/measurement mode.
2.2 Components
- CMTOOL Digital Vacuum Gauge
- 1/4" SAE Extension Straight Joint Adapter
- 1/4" SAE Tee Joint Adapter
- User Manual
- Portable Bag
- 9V Battery (included)

Figure 2: Contents of the product package, including the vacuum gauge, two adapters, a manual, and a portable bag.

Figure 3: Dimensions of the digital vacuum gauge (166mm/6.53inch height, 72mm/2.83inch width, 35mm/1.37inch depth) and the included 1/4" SAE extension straight joint and tee joint adapters.
3. Specifications

Figure 4: Detailed specifications of the CMTOOL Digital Vacuum Gauge.
| Parameter | Value |
|---|---|
| Measuring range | 0-100 Kpa / 0-750000 microns |
| Measurement unit | mmHg/inHg/umHg(microns)/ftH2O/cmH2O/inH2O/Pa/Kpa/mbar/bar/Kg/cm²/psi/oz/in² |
| Accuracy | ±0.1%FS |
| Resolution | 0.001Kpa/1umHg |
| Set Alarm Thresholds | 0-100 Kpa / 0-750000 microns |
| Alarm | Sound and light alarm |
| Exceed the set pressure display | Error |
| Screen | HD display, support backlight |
| Temperature unit | Switchable °C/°F unit |
| Working temperature | 0-50°C (32-122°F) |
| Storage temperature | -10-60°C (14-140°F) |
| Power supply | 9V (included) |
| Weight | 400g |

Figure 5: Table detailing the 13 selectable pressure units, their measurement ranges, and resolutions.
4. Setup
- Install Battery: Open the battery compartment and insert the provided 9V battery, ensuring correct polarity. The battery level will be displayed on the screen.
- Attach Adapter: Select the appropriate 1/4" SAE adapter (Extension Straight Joint or Tee Joint) for your application and securely screw it onto the vacuum gauge's input port.
- Connect to System: Connect the adapter to the system you intend to measure the vacuum of. Ensure all connections are tight to prevent leaks.
5. Operating Instructions
5.1 Power On/Off
- Press the Power button to turn the device on.
- Press and hold the Power button to turn the device off.
5.2 Unit Switching
- Short press the "UNITS" button to cycle through the 13 available pressure units (e.g., mmHg, inHg, Pa, Kpa, psi).
- Long press the "UNITS" button to switch the temperature unit between °C and °F.
5.3 Calibration
- Long press the "CAL" button to enter calibration mode. The gauge will automatically exit calibration after completion.
- Refer to the full manual for advanced calibration procedures if needed.
5.4 MAX/MIN Value Display
- Short press the "MAX/MIN" button to switch between displaying the maximum and minimum recorded vacuum values.
5.5 Monitoring Mode and Alarm
- When the gauge is turned on, it defaults to the normal measurement mode.
- Short press the "SET" button (often combined with other functions or a dedicated button, refer to device markings) to enter the monitoring mode.
- In monitoring mode, if the current pressure falls below the pre-set pressure threshold, the backlight will flash, and the buzzer will sound continuously, indicating an alarm condition.
- To set alarm thresholds, refer to the detailed instructions in the full manual.

Figure 6: The digital vacuum gauge displaying monitoring mode with an active alarm, indicated by a flashing backlight and audible alert when pressure drops below the set point.
6. Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Battery Replacement: When the battery indicator shows low power, replace the 9V battery promptly to ensure accurate readings.
- Storage: Store the vacuum gauge in its portable bag in a dry place, away from extreme temperatures and direct sunlight, when not in use. Refer to storage temperature specifications (-10-60°C / 14-140°F).
- Sensor Care: Keep the sensor port clean and free from debris. Avoid exposing the sensor to liquids or corrosive substances.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Gauge does not power on | Dead or incorrectly installed battery | Replace the 9V battery or ensure it is installed with correct polarity. |
| Inaccurate readings | Needs calibration; dirty sensor; leaks in the system connection | Perform calibration; clean the sensor port; check all connections for tightness. |
| "Error" displayed on screen | Pressure exceeds the set threshold in monitoring mode | Check the system pressure. Adjust alarm thresholds if necessary. |
| Backlight not working | Low battery; backlight feature disabled (if applicable) | Replace battery. Consult the full manual for backlight control options. |
8. User Tips
- Always ensure the battery is sufficiently charged before critical measurements to avoid interruptions.
- Utilize the backlight feature in dimly lit environments for optimal readability.
- Take advantage of the non-slip design for a firm grip, especially in oily or wet conditions.
- Regularly check and clean the adapter connections to maintain measurement accuracy.
- Familiarize yourself with the 13 pressure units to quickly switch to the most appropriate one for your task.
9. Warranty and Support
CMTOOL products are manufactured to high-quality standards. For warranty information, technical support, or service inquiries, please contact your retailer or visit the official CMTOOL website. Please retain your proof of purchase for warranty claims.