Anytek RAW2 Action Camera Helmet User Manual

1. Introduction

Thank you for choosing the Anytek RAW2 Action Camera Helmet. This helmet is designed for outdoor sports activities, offering both head protection and the ability to capture your experiences in high definition. It integrates a 1080P camera, front and tail lights for enhanced visibility, and a long-lasting battery for extended recording. Please read this manual carefully before use to ensure proper operation and safety.

2. Safety Information

• Always ensure the helmet is properly fitted and securely fastened before any activity.
• Do not attempt to disassemble, modify, or repair the helmet or its electronic components yourself. This may void the warranty and pose safety risks.
• Keep charging ports dry and clean to prevent damage.
• Avoid exposing the helmet to extreme temperatures or direct sunlight for prolonged periods.
• Use only the provided Type-C data cable for charging.

3. Package Contents

Please check the package for the following items:

• 1 x Anytek RAW2 Action Camera Helmet
• 1 x Type-C Data Cable
• 1 x Instruction Manual

4. Product Overview

The Anytek RAW2 helmet combines safety with advanced recording and lighting features. Below are key components and their functions.

Figure 1: Anytek RAW2 helmet with integrated 1080P camera, supporting up to 128GB storage and 8 hours of recording.

Figure 2: Front light for enhanced visibility during night riding.

Figure 3: Rear indicator with multiple modes (flash, slow flashing, steady on) for increased safety.

Figure 4: Ultra-clear PC lenses provide a fog-free, resilient, and smooth view, preventing scratches.

Figure 5: Removable inner liner for easy cleaning and enhanced comfort.

Figure 6: Connect to PC or mobile for real-time viewing and data transfer.

5. Setup

5.1 Inserting TF Card

1. Locate the button operation area below the camera.
2. Carefully open the waterproof silicone cover.
3. Insert a TF card (maximum 128GB supported) into the card slot.
4. Ensure the card is fully seated, then securely close the silicone cover.

5.2 Charging the Helmet

1. Locate the Type-C charging port within the button operation area.
2. Connect the provided Type-C USB cable to the charging port and a power source (5V-2A recommended).
3. A red indicator light will illuminate, indicating that the helmet is charging.
4. The red indicator light will turn off once the battery is fully charged.

6. Operating Instructions

The button operation area is located below the camera, protected by a waterproof silicone cover. Refer to the video below for a visual guide on button operations.

6.1 Camera Power, Recording, and Photo Function

1. To start recording: Short press the camera power button once. A blue indicator light will flash, signifying that recording has begun.
2. To take a photo during recording: While recording, short press the camera power button once. A photo will be captured and saved, and video recording will automatically resume.
3. To stop recording/power off camera: Long press the camera power button. The blue indicator light will turn off, and recording will cease.

6.2 Front Light Operation

1. Short press the front light button once to activate slow flash mode.
2. Press the button again for steady on mode.
3. Press the button a third time to turn off the front light.

6.3 Tail Light Operation

1. Short press the tail light button once to activate slow flash mode.
2. Press the button again for fast flash mode.
3. Press the button a third time for steady on mode.
4. Press the button a fourth time to turn off the tail light.

7. Connecting to PC/Mobile

To view or transfer your recorded footage, connect the helmet to a computer or mobile device:

1. Ensure the helmet camera is powered off.
2. Use the provided Type-C data cable to connect the helmet's charging port to your computer or mobile device.
3. The device should recognize the helmet as an external storage device. You can then access the recorded files.

8. Troubleshooting

• Camera not recording: Ensure a TF card is properly inserted and has sufficient available storage space. Check the battery level; charge if necessary.
• Front/Tail lights not working: Verify that the battery is charged. Ensure the light buttons are pressed correctly according to the operating instructions.
• Video date/time setting: The video date and time settings are typically managed through the device's internal software. Connect the helmet to a computer and look for a configuration file or a dedicated application to adjust these settings. Refer to the full instruction manual for detailed steps if available.
• Helmet not recognized by PC/Mobile: Ensure the Type-C cable is securely connected to both the helmet and the device. Try a different USB port or cable.

9. Specifications

10. User Tips

• For optimal video quality and storage, ensure you use a high-speed TF card, up to 128GB.
• Regularly check the battery level before long rides to ensure continuous recording and light functionality.
• Always keep the waterproof silicone cover securely closed over the ports to protect them from moisture and dust, especially during outdoor activities.

11. Warranty and Support

This product comes with a standard manufacturer's warranty. Please retain your proof of purchase for any warranty claims. For technical support, troubleshooting assistance, or further inquiries, please contact the seller or refer to the official product website for the most up-to-date information.