Introduction
The BTF-LIGHTING 5-in-1 RGBCCT LED Strip Light offers versatile and vibrant lighting solutions for various applications. This LED strip integrates five colors (Red, Green, Blue, Cool White, Warm White) into a single LED chip, providing a wide spectrum of colors and tunable white light from 2700K to 6500K. Designed for flexibility and ease of installation, it can be cut to custom lengths and is available in different waterproof ratings to suit indoor and outdoor environments.
Image: BTF-LIGHTING 5-in-1 RGBCCT LED Strip Light on a reel, showcasing its compact design.
Package Contents
Upon opening your package, you should find the following items:
- 1 Roll (5 meters / 16.4 feet) of 5050 RGBCCT 5-in-1 LED Strip Light (96 LEDs/meter)
- Product Accessories (may vary slightly between new and previous versions, typically includes wires and connectors)
- User Manual (this document)
Image: Package contents for both new and previous versions of the LED strip, highlighting the reel, connectors, and user manual.
Specifications
| Feature | Detail |
|---|---|
| Model Number | BTF-RGBCCT-5IN1 |
| LED Chip Model | SMD5050 (5-in-1 RGBCCT) |
| LEDs Number/Meter | 96 LEDs/m (480 RGB + 480 Cool White + 480 Warm White per 5m) |
| Input Voltage | DC12V / DC24V |
| Power Source | DC |
| Power Consumption | 0.1W per LED (0.5W per LED when all 5 colors R+G+B+CW+WW are open) |
| Luminous Flux | 249-2000 lumens |
| Color Temperature (White) | W1 2700K (Warm White), W2 6500K (Cool White) |
| Standard Reel Length | 5 meters (16.4 feet) |
| View Angle | 120° |
| Average Life | 50,000 hours |
| Working Temperature | -25°C to +50°C |
| Storage Temperature | -40°C to +50°C |
| Waterproof Ratings | IP30 (Non-Waterproof), IP65 (Silicone Coating), IP67 (Silicone Tube) |
| Is Smart Device | Yes (Requires compatible controller) |
| Certifications | CCC, CE, ROHS, UL |
Image: LED Contrast - Illustrates the difference between 4-color (RGB + Warm White) and 5-color (RGB + Warm White + Cold White) 5050 SMD LEDs.
Image: Product Specifications - Detailed dimensions and visual representation of different voltage and waterproof variants.
Image: Waterproof Levels - Explains the difference between IP65 (silicone coating, indoor) and IP67 (silicone tube, outdoor) protection.
Setup and Installation
This LED strip requires a DC12V or DC24V power supply and a compatible PWM LED controller (not included in the package) for full functionality, especially for smart features and color control.
1. Preparation
- Ensure you have a suitable DC12V or DC24V power supply and a 6-pin RGBCCT LED controller.
- Clean the surface where the LED strip will be installed. Ensure it is dry and free of dust or grease.
- Unroll the LED strip carefully.
2. Cutting the LED Strip (Optional)
The LED strip can be cut to your desired length. Look for the designated cutting marks on the PCB. For 24V strips, every six LEDs can be cut. For 12V strips, every three LEDs can be cut. The strip will still function after cutting.
Image: Flexible, Cuttable, Double-sided Tape - Demonstrates the physical characteristics of the LED strip.
Attention: For 96LED/m LED strips, standard SMD 6-pin connectors are NOT suitable after cutting. Connections must be made by soldering.
Image: Soldering Attention - Highlights that 96LED/m strips require soldering for connections after cutting, not standard connectors.
3. Connecting the LED Strip
Connect the LED strip to your RGBCCT controller. Ensure correct polarity and pin alignment (R, G, B, CW, WW, V+). The strip has adhesive tape on the back (except for IP67 versions) for easy mounting.
Image: Installation Introduction - Basic wiring diagram for connecting the LED strip to a controller and power supply.
For connecting multiple strips or making turns:
- Transparent Middle Connection: Use appropriate connectors to join strip segments.
- 0-360° Connection: Allows for flexible turns and angles.
- Single End Connection: Connect the controller to one end of the strip.
Important Notes for Connections:
- When using connectors, press the patch firmly to ensure it is fully clamped.
- If connecting to an IP65 light strip, you need to clean the silicone coating on the surface of the strip where the connector will be applied to ensure proper contact.
Image: Connection Types - Visual guide for different ways to connect LED strip segments and important considerations.
Operation
The BTF-LIGHTING 5-in-1 RGBCCT LED Strip Light offers a wide range of lighting possibilities when paired with a compatible controller (e.g., WiFi Bluetooth 5-in-1 Controller, SP630E, or other PWM RGBCCT controllers).
1. Basic Color Control
- Multiple Colors: Adjust the color to any shade using your controller's color wheel or preset options. Brightness can typically be controlled from 1% to 100%.
- Pure White Light: The 5-in-1 LED allows for both RGB-mixed white light and dedicated Cool White (6500K) and Warm White (2700K) pure white light. You can freely switch between these white options and adjust their brightness.
Video: Demonstrates the LED strip's capabilities including multiple color options, tunable pure white light (3000K-6500K), dynamic effects, and music synchronization effects, all controlled via a smartphone app.
2. Dynamic Effects
Many controllers offer various dynamic modes, such as:
- Seven Color Jump
- Seven Color Breathe
- White Color Breathe
- And many more, depending on your controller's features.
3. Music Synchronization
With compatible controllers, the LED strip can react to music, creating an immersive audio-visual experience. Available modes may include:
- Music Breathe
- Music Jump
- And other music-reactive patterns.
4. Smart Control
If using a smart controller (e.g., WiFi Bluetooth 5-in-1 Controller), the LED strip can be integrated with smart home systems like Google Assistant and Amazon Alexa for voice control and automation.
Care and Maintenance
- Cleaning: For non-waterproof (IP30) or silicone-coated (IP65) strips, gently wipe with a dry, soft cloth. Avoid using harsh chemicals or abrasive materials. For IP67 silicone tube strips, a damp cloth can be used.
- Environment: Ensure the LED strip is used within its specified working temperature range (-25°C to +50°C). Avoid exposing non-waterproof strips to moisture or extreme humidity.
- Power Supply: Always use a power supply that matches the voltage requirements (DC12V or DC24V) and provides sufficient wattage for the length of the strip being used.
- Connections: Periodically check connections for any signs of wear or looseness, especially if the strip is in a high-traffic area or subject to movement.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| LED strip does not light up. |
|
|
| Only some sections of the strip light up. |
|
|
| Colors are incorrect or inconsistent. |
|
|
| LED strip flickers. |
|
|
User Tips
- Power Supply Sizing: To determine the appropriate power supply, calculate the total wattage needed. Each LED consumes 0.1W per color channel. If all 5 channels (R+G+B+CW+WW) are fully on, each LED consumes 0.5W. For a 5-meter strip with 96 LEDs/meter, this is 5m * 96 LEDs/m = 480 LEDs. Total wattage = 480 LEDs * 0.5W/LED = 240W. Always choose a power supply with a wattage rating at least 20% higher than your calculated maximum to ensure longevity and stable performance.
- Controller Compatibility: Ensure your chosen controller is specifically designed for RGBCCT 5-in-1 LED strips to utilize all color and white tuning features.
- Soldering for 96LED/m: Remember that for the 96LED/m density, direct soldering is required for connections after cutting, as standard 6-pin connectors are not compatible.
Warranty and Support
BTF-LIGHTING products are manufactured to high-quality standards. For any issues or support, please refer to the seller's contact information or the platform's customer service. Keep your purchase receipt for warranty claims.
This product is certified with CCC, CE, ROHS, and UL standards, ensuring compliance with safety and quality regulations.
