1. Product Overview
The Niditon TM-8201 is a versatile digital alarm clock featuring a large LED mirror display, dual USB charging ports, adjustable brightness, and a sleek design suitable for desks or wall mounting.

Package Contents:
- 1 x Niditon TM-8201 Digital LED Mirror Alarm Clock
- 1 x Detachable Base
- 1 x Type-C Power Cable (1.5M)
- 1 x User Manual (this document)
2. Setup
2.1 Powering On
- Connect the provided Type-C power cable to the charging port on the right side of the clock.
- Plug the other end of the USB cable into a DC-5V/1A USB power adapter (not included).
- The clock will power on automatically.
Note: A CR2016 battery (not included) can be installed to maintain time settings during power outages. The battery only memorizes time and does not power the display or functions.
2.2 Initial Power-on Reset
- White LED Display Clock: The display will show a full LED pattern for 3 seconds, then emit one 'Bi' sound and enter time display mode.
- RGB LED Display Clock: The display will cycle through red, green, and blue colors once, then emit a beep and enter time display mode.
2.3 Placement
Your clock can be used in two ways:
- Desk Clock: Attach the detachable base for stable placement on any flat surface like a desk, bedside table, or dressing table.
- Wall Clock: Remove the base. Use the hanging hole on the back of the clock to mount it on a wall in your bedroom, office, living room, or kitchen.
3. Operating Instructions
3.1 Controls Overview
The clock features three function buttons on the left side and one touch button on the top:
- M (Mode) Button: Used to enter setting modes (Time, Alarm, Brightness, Color).
- + (Up) Button: Used to increase values or cycle through options.
- - (Down) Button: Used to decrease values or cycle through options.
- SNOOZE Button (Top): Activates the snooze function when the alarm sounds.
3.2 Time Setting
- In time display mode, long press the 'M' button for 2 seconds to enter time setting mode. The sequence is 12H/24H format → Hour → Minute. The current setting will flash.
- 12H/24H Format: Use the '+' or '-' buttons to select between 12-hour or 24-hour format.
- Set Hour: Press '+' to increase the hour, '-' to decrease. Hold the button for rapid adjustment.
- Set Minute: Press '+' to increase the minute, '-' to decrease. Hold the button for rapid adjustment.
- Press 'M' again to confirm each setting and move to the next, or wait a few seconds for the clock to automatically exit setting mode.
3.3 Alarm Setting
- In time display mode, single press the 'M' button to switch to alarm display mode (default 6:00).
- Long press the 'M' button for 2 seconds to enter alarm setting mode. The sequence is Hour → Minute → Snooze Time. The current setting will flash.
- Set Alarm Hour: Use '+' or '-' to adjust the hour.
- Set Alarm Minute: Use '+' or '-' to adjust the minute.
- Set Snooze Time: Use '+' or '-' to adjust the snooze delay from 5 to 60 minutes (default is 5 minutes).
- Press 'M' again to confirm each setting.
- After setting, single press the '-' button to turn the alarm ON (AL symbol appears) or OFF (AL symbol disappears).
3.4 Snooze Function
- When the alarm sounds (buzzer for 2 minutes at 2KHz frequency), press the 'SNOOZE' button on top to activate snooze. The AL symbol will flash.
- The alarm will sound again after the set snooze duration. The snooze function is unlimited.
- To turn off the alarm completely when it's sounding, press any button other than 'SNOOZE'. The AL symbol will stop flashing.
- If in snooze state, press any button other than 'SNOOZE' to exit snooze and turn off the alarm.
3.5 Brightness Adjustment

- Manual Brightness: In time display mode, single press the '+' button to cycle through 3 levels of brightness: Bright → Medium → Dark.
- Automatic Light-Sensitive Function: Long press the '+' button to toggle this function ON or OFF. The display will show 'ON' or 'OFF' for three seconds. When ON, the clock automatically adjusts its brightness based on ambient light.
3.6 Night Mode Setting
Night mode automatically sets the LED to its lowest brightness during a specified period.
- In time display mode, short press the 'M' button twice to enter night mode setting. The default is 'OFF'.
- Use the '+' or '-' buttons to select 'ON' or 'OFF'.
- If 'ON', long press the 'M' button to set the night mode time period. The sequence is Start Hour → Start Minute → End Hour → End Minute.
- Use '+' or '-' to adjust the values. The default period is 18:00 to 6:00.
3.7 LED Display Color Switching (RGB Models Only)

- In time display mode, single press the 'M' button three times to enter LED display color selection mode (default display: 0:CL).
- Long press the 'M' button to enter setting mode.
- Use the '+' or '-' buttons to select different LED display color modes:
- 0:CL - Random RGB
- 1:CL - RGB Changing
- 2:CL - RGB Left to Right Flowing
- 3:CL - RGB Downward Top Flowing
- 4:CL - Blue
- 5:CL - Light Blue
- 6:CL - Green
- 7:CL - Yellow
- 8:CL - Red
- 9:CL - Purple
- 10:CL - White
3.8 Dual USB Charging Ports

The clock is equipped with two USB output ports on the right side. You can use these ports to charge your mobile devices (e.g., smartphones, tablets) while the clock is powered on. Simply connect your device's USB charging cable to one of the clock's USB output ports.
Video 1: Product demonstration showing features like mirror surface, RGB color changing, and USB charging.
4. Maintenance
4.1 Cleaning
- To clean the clock, gently wipe the surface with a soft, dry, or slightly damp cloth.
- Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
- Ensure the clock is unplugged before cleaning.
4.2 Battery Replacement
If you use a CR2016 battery for memory backup and notice that time settings are lost after a power outage, it may be time to replace the battery.
- Locate the battery compartment on the back of the clock.
- Open the compartment cover.
- Remove the old CR2016 battery and insert a new one, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Clock does not turn on / Display is blank | No power supply; Faulty cable/adapter | Ensure the Type-C cable is securely connected and the USB adapter is working. Try a different USB port or adapter. |
| Alarm does not sound when on battery power | Battery is for memory only | The alarm function requires the clock to be connected to the USB power supply. The battery only retains time settings. |
| Automatic brightness sensor not working properly | Sensor obstructed; Insufficient ambient light reaching sensor | Ensure the auto-light sensing area (top left side) is not obstructed. Position the clock where ambient light can reach the sensor directly. You can also use manual brightness adjustment. |
| Time settings are lost after power outage | CR2016 memory battery is dead or not installed | Install or replace the CR2016 battery in the battery compartment. |
| Buttons are unresponsive | Temporary software glitch | Unplug the clock from power for a few seconds, then plug it back in to perform a soft reset. |
6. Specifications

| Feature | Detail |
|---|---|
| Model Number | TM-8201 |
| Dimensions (L x H) | 16 cm (6.3 inches) x 8 cm (3.2 inches) |
| Weight | Approx. 170g |
| Material | Plastic (ABS frame) |
| Screen Type | LED Mirror Display |
| Motivity Type | Digital |
| Power Supply | DC-5V/1A USB (Type-C port) |
| Memory Battery | CR2016 (for time memory only) |
| Working Voltage | 3.0V-5V |
| Static Current | <30uA (when LED is not displayed) |
| Alarm Frequency | 2KHz |
| USB Output Ports | 2 (for charging external devices) |
7. User Tips
- Power Outage Protection: Install a CR2016 battery to ensure your time settings are retained during power interruptions. This is a key feature for convenience.
- Battery Function: Remember that the CR2016 battery is solely for memory backup. The clock's display and all functions require continuous USB power.
- Optimal Auto-Brightness: For the best performance of the automatic brightness sensor, ensure the top-left side of the clock (where the sensor is located) is not obstructed and has direct exposure to ambient light.
- Dual Use: Take advantage of the detachable base to easily switch between a stylish desk clock and a space-saving wall clock.
8. Warranty and Support
Niditon is committed to providing high-quality products. If you encounter any issues or have questions regarding your TM-8201 Digital LED Mirror Alarm Clock, please refer to the troubleshooting section of this manual. For further assistance, please contact your retailer or the manufacturer's customer support.
Please retain your proof of purchase for any warranty claims.