1. Introduction
Thank you for choosing the HYULIGHTS HYU-7-40BW 200W Mini Beam Spot LED Moving Head Light. This professional stage lighting effect is designed to deliver dynamic and vibrant light shows for various events, including professional stage performances and DJ setups. This manual provides essential information for the safe and efficient operation and maintenance of your device.
2. Safety Information
- Always connect the device to a grounded power outlet.
- Ensure the voltage matches the device's requirements (AC110-240V 50-60HZ).
- Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
- Avoid direct eye exposure to the light source.
- Ensure adequate ventilation around the unit to prevent overheating.
- Keep the device away from moisture, rain, and flammable materials.
- Mount the device securely using appropriate hardware and safety cables.
3. Package Contents
Upon unpacking, please verify that all items listed below are present and in good condition:
- 1 x HYULIGHTS HYU-7-40BW 200W Mini Beam Spot LED Moving Head Light
- 1 x Power Cable
- 1 x User Manual
- 1 x DMX Cable
- 1 x Bow Mount
- 2 x Screws for mounting

4. Specifications
| Feature | Description |
|---|---|
| Model Number | HYU-7-40BW |
| Item Type | Stage Lighting Effect |
| Style | DMX Stage Light |
| Power Source | AC |
| Voltage | AC110-240V 50-60HZ |
| Light Source | 1pcs 185W White High Power LED |
| Total Power | 200W |
| Strobe | 25 times/sec |
| Prism | 1pcs 24 rotating prisms (No Zoom) |
| Beam Angle | 1.5° |
| Control Channel | 12 channels |
| Horizontal Scan Angle | 540°, speed controllable |
| Vertical Scan Angle | 220°, speed controllable |
| Color Wheel | 11 colors + color rotating speed, infinite rotating |
| Gobo Wheel | 14 gobos + shake + Gobo Rotating speed, infinite rotating |
| Dimmer | 0-100% with regulated constant color control |
| Control Panel | 4 Digital LED display figures |
| Display Board | LED display |
| Net Weight (N.W) | 5.5KG |
| Gross Weight (G.W) | 6.3 KG |
| Packing Size | 37.5*27*27.5cm |
| Certification | CE, FCC, RoHS, WEEE |


5. Setup
5.1 Mounting
The moving head light can be mounted in various positions (e.g., truss, floor) using the provided bow mount and screws. Ensure the mounting surface or structure can safely support the weight of the fixture. Always use a safety cable as a secondary attachment.
5.2 Power Connection
Connect the provided power cable to the power input on the rear panel of the fixture and then to a compatible AC110-240V 50-60HZ grounded power outlet.
5.3 DMX Connection (Optional)
For DMX control, connect a DMX cable from your DMX controller's output to the DMX IN port on the fixture. If linking multiple fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next, and so on. Ensure the last fixture in the chain has a DMX terminator connected to its DMX OUT port.

6. Operating Modes
The HYU-7-40BW offers several operating modes:
- Auto-running: The fixture runs through pre-programmed light sequences automatically.
- Sound-activated: The light effects respond to ambient sound or music.
- DMX512: Allows for precise control over all features (colors, gobos, movement, dimmer, strobe) using a DMX controller. The fixture uses 12 DMX channels.
- Master-slave: Link multiple fixtures where one acts as the master (controlling) and others as slaves (following the master's commands).
6.1 Control Panel
The fixture features a 4-digit LED display and buttons (MENU, UP, DOWN, ENTER) for navigating settings and selecting operating modes.
6.2 Movement and Effects
- Pan (Horizontal Scan): 540° range, speed controllable.
- Tilt (Vertical Scan): 220° range, speed controllable.
- Color Wheel: 11 colors with infinite rotating speed.
- Gobo Wheel: 14 gobos with shake and infinite rotating speed.
- Prism: 1pcs 24 rotating prisms (No Zoom).
- Dimmer: 0-100% with regulated constant color control.
- Strobe: Up to 25 times/second.

7. Maintenance
- Cleaning: Regularly clean the lens and exterior with a soft, lint-free cloth. Do not use abrasive cleaners.
- Ventilation: Ensure ventilation openings are clear of dust and debris to prevent overheating.
- Inspection: Periodically check all cables, connections, and mounting hardware for wear or damage.
- Storage: When not in use, store the fixture in a dry, dust-free environment.
8. Troubleshooting
- No Power: Check the power cable connection, the power outlet, and the fuse on the rear panel. Ensure the power switch is ON.
- No Light Output: Verify the dimmer setting is not at 0%. Check DMX signal if in DMX mode.
- No Movement: Check DMX connections and settings. Ensure pan/tilt limits are not set.
- Erratic Behavior: Check DMX signal integrity. Ensure the fixture is not in a master-slave conflict.
- Overheating: Ensure proper ventilation and clean any dust from the cooling vents.
9. User Tips
- DMX Software: For advanced control and custom light shows, consider using DMX software. You may need to find or create a fixture file for your specific DMX software (e.g., Freestyler).
- Power Stability: To prevent potential damage to internal components, ensure the light is connected to a stable power source. Avoid frequent power fluctuations.
- Creative Use: Experiment with different combinations of colors, gobos, and prism effects to create unique atmospheres for your events. The infinite rotation features of the color and gobo wheels offer extensive creative possibilities.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase.