Hantek HTM208B HTM208C

Contents

Hantek HTM208B HTM208C Multi-Channel Temperature Recorder User Manual

Models: HTM208B, HTM208C

1. Introduction

The Hantek HTM200 series handheld multi-channel temperature detector is a high-performance device designed for real-time collection of multi-channel temperature data. Controlled by a 32-bit ARM microprocessor, it offers stable and accurate measurements, supporting 11 types of thermocouples and featuring spouse detection. This manual provides essential information for the safe and efficient operation of your HTM208B or HTM208C temperature recorder.

2. Safety Information

Please read and understand all safety instructions before operating the device. Failure to follow these instructions may result in injury or damage to the device.

  • Electrical Safety: The digital and analog signals are isolated for live testing. However, always exercise caution when working with electrical circuits.
  • Battery Safety: Use only specified 18650 standard lithium batteries. Do not expose batteries to excessive heat or dispose of them in fire.
  • Environmental Conditions: Operate the device within the specified operating temperature and humidity ranges to ensure optimal performance and prevent damage.
  • Maintenance: Refer to the maintenance section for proper cleaning and care. Do not attempt to disassemble or repair the device yourself.

3. Package Contents

Carefully unpack your Hantek HTM200 series temperature recorder and verify that all items listed below are included:

  • Hantek HTM208B/HTM208C Multi-Channel Temperature Recorder
  • Power Adapter (EU/US Plug Type, depending on model)
  • USB Type-C Cable
  • Thermocouples (typically two included)
  • Carrying Case
Hantek HTM208B/C package contents including device, charger, USB cable, thermocouples, and carrying case.
Figure 3.1: Contents of the Hantek HTM208B/C package.

4. Product Overview

The HTM200 series is designed for versatility and ease of use in various temperature monitoring applications.

4.1 Key Features

  • Multi-Channel Measurement: Simultaneously collects data from up to 8 channels.
  • Display: 320*240 TFT high-definition display supporting list and bar graph views.
  • Thermocouple Compatibility: Supports 11 types of thermocouples (J/K/T/E/S/N/B/R/A/C/D).
  • Alarm Control: Features temperature overload alarm with buzzer for upper and lower limit breaches.
  • Data Storage: Standard U disk storage, with optional Micro SD card support.
  • Connectivity: Standard Type-C communication, with optional Bluetooth and 4G modules for remote data acquisition.
  • Software Support: Equipped with Windows and Android data acquisition terminals for multi-platform monitoring.
  • Power: Uses 18650 standard lithium batteries, supports Type-C charging.
Diagram highlighting key features of the Hantek HTM208B/C: Temperature overload alarm control, data acquisition terminal, 320x240 TFT display, Type-C charging, 11 thermocouple test, and U-disk storage.
Figure 4.1: Key features of the HTM208B/C.

4.2 Device Layout

Labeled diagram of the Hantek HTM208B/C showing USB Interface, Type-C Interface, TFT Display, Push Buttons, and Thermocouple Connection Ports.
Figure 4.2: Front and side view of the device with labeled components.
  • TFT Display: Shows real-time temperature data, lists, and bar graphs.
  • Push Buttons: For navigation, function selection (F1-F4), utility, list, bar graph view, and saving data.
  • Thermocouple Connection Ports (1-8): Terminal blocks for connecting up to 8 thermocouples.
  • USB Interface: For data transfer to a computer.
  • Type-C Interface: For charging and communication.
  • SD Card Slot: For optional Micro SD card storage.
  • Power Button: To turn the device on/off.
Video 4.1: A brief demonstration of the Hantek HTM208B/C temperature data logger in use, showcasing its display and functionality.

5. Setup

5.1 Battery Installation and Charging

  1. The device uses 18650 standard lithium batteries. Ensure batteries are correctly inserted according to polarity markings.
  2. Connect the provided USB Type-C cable to the device's Type-C port and the power adapter.
  3. Plug the power adapter into a suitable power outlet (100VAC-240VAC, 50Hz/60Hz). The device supports Type-C charging.
  4. A full charge provides over 15 hours of working time.

5.2 Connecting Thermocouples

The HTM200 series supports 11 types of thermocouples. Ensure you use the correct type for your application.

  1. Identify the thermocouple connection ports (1-8) at the bottom of the device.
  2. Connect your thermocouples to the appropriate terminal blocks. Ensure a secure connection for accurate readings.
  3. Observe the maximum channel-to-channel voltage of 300V DC and maximum input voltage of ±75V DC.

5.3 Powering On/Off

  • To Power On: Press and hold the Power button on the side of the device until the TFT display illuminates.
  • To Power Off: Press and hold the Power button until the device shuts down. The device saves the last shutdown settings by default.

6. Operating Instructions

6.1 Basic Operation and Display Modes

Use the push buttons for navigation and function selection.

  • F1-F4 Buttons: Context-sensitive function buttons displayed on the screen.
  • Utility Button: Accesses general settings and utilities.
  • Arrow Buttons: Navigate through menus and adjust settings.
  • Enter Button: Confirms selections.
  • List Button: Switches the display to a list view of all channel temperatures.
  • Bar Button: Switches the display to a bar graph view, visually representing temperature changes across channels.

6.2 Temperature Measurement

Once thermocouples are connected and the device is powered on, it will begin real-time temperature measurement. The display will show readings for each active channel.

6.3 Alarm Settings

The device features an over-temperature alarm function, which is enabled by default.

  1. Access the alarm settings via the Utility menu.
  2. Set the upper and lower temperature limits for each channel as required.
  3. If a measured temperature exceeds the upper limit or falls below the lower limit, the device's buzzer will sound continuously to alert you.
Hantek HTM208B/C displaying temperature data in a list format, with a red alarm icon indicating an overrun condition. The image also shows 'Support Type-C Charging' and 'Upper and Lower Overrun Alarm' text.
Figure 6.1: Over-temperature alarm function.

6.4 Data Storage and Export

The device supports data logging to a U disk or an optional Micro SD card.

  • U Disk Storage: Connect a U disk to the USB interface to store measurement data.
  • Micro SD Card (Optional): Insert a Micro SD card into the dedicated slot for real-time data saving.
  • Exporting Data: Data can be exported for further analysis and printing.

6.5 Software for Data Acquisition

The HTM200 series is compatible with Windows and Android data acquisition terminals.

  1. Install the appropriate software on your computer or Android device.
  2. Connect the temperature recorder via the Type-C port (or optional Bluetooth/4G).
  3. Use the software to monitor real-time temperature changes, track abnormal temperatures, and quickly read temperature values from each channel on multiple platforms.
Image showing the Hantek HTM208B/C connected wirelessly to a laptop and a smartphone, demonstrating multi-platform data acquisition with Windows, Android, Bluetooth, and 4G icons.
Figure 6.2: Multi-platform data acquisition.
Animated GIF showing the Hantek software interface on a computer, displaying real-time temperature graphs and data logs for multiple channels.
Figure 6.3: Example of the data acquisition software interface.

7. Maintenance

7.1 Cleaning

  • Wipe the device with a soft, dry cloth.
  • Do not use abrasive cleaners or solvents, as they may damage the casing or display.
  • Ensure no liquids enter the device through ports or buttons.

7.2 Battery Care

  • Charge the battery regularly, even if the device is not in use, to maintain battery health.
  • If storing the device for an extended period, charge the battery to approximately 50% and store in a cool, dry place.
  • Remove batteries if the device will not be used for a very long time to prevent leakage.

7.3 Storage

  • Store the device in its carrying case to protect it from dust, moisture, and physical damage.
  • Avoid storing in extreme temperatures or high humidity.

8. Troubleshooting

ProblemPossible CauseSolution
Device does not power onLow battery or no battery installed.Charge the device using the Type-C cable and power adapter. Ensure batteries are correctly installed.
Inaccurate temperature readingsIncorrect thermocouple type selected or poor connection.Verify the thermocouple type matches the device settings. Check thermocouple connections for tightness.
Alarm not soundingAlarm limits not set or alarm function disabled.Check alarm settings in the Utility menu and ensure limits are configured correctly.
Data not saving to U disk/SD cardU disk/SD card full, corrupted, or not properly inserted.Check storage capacity. Try reinserting the U disk/SD card. Format the storage device if necessary (this will erase all data).
Software not connecting to deviceIncorrect cable, driver issues, or software not running.Ensure the Type-C cable is securely connected. Install necessary drivers. Restart the software and device.

9. Specifications

The following table details the technical specifications for the HTM208B and HTM208C models:

Table of specifications for Hantek HTM208B and HTM208C models, detailing features like U disk, Bluetooth, SD card, 4G, thermocouple types, accuracy, range, resolution, alarm, display, software, storage, communication, voltage, plug type, display size, operating environment, storage environment, preheat time, power requirements, battery parameters, working hours, power consumption, size, and weight.
Figure 9.1: Detailed specifications for HTM208B and HTM208C.
FeatureHTM208BHTM208C
Model NumberHTM208BHTM208C
Digital Channels8
U diskYes
BluetoothWithoutYes
SD cardWithoutYes
4G (domestic)WithoutWithout
4G (Universal Version)Without
Graduation number11 kinds of thermocouples: J/K/T/E/S/N/B/R/A/C/D type
Type K thermocouple basic accuracy-200°C to 0°C error is ±1.2°C
The error from 0°C to 1370°C is ±0.8°C (excluding thermocouple error)
Temperature measurement rangeType K thermocouple: -200°C to 1370°C
Resolution0.1°C
CorrectionEach channel can be corrected
AlarmSupport upper and lower limit alarms
DisplaySupport list display and bar graph display
Cold Junction Compensation Accuracy0.5°C
Software supportAndroid and Windows data acquisition software
StorageSupport U disk (standard) and Micro SD card (optional) to save in real time
Communication InterfaceUSB-Type C communication (standard), Bluetooth and 4G communication (optional)
Maximum withstand voltage between channels300VDC
Channel maximum input voltage±75VDC
Plug in terminal typeE0308 Tube Terminal Blocks
Display Resolution640*480 Pixels
Display Size3.0 - 4.9 Inches
OtherSupport Chinese and English, Backlight brightness adjustment, Shutdown time settings
Operating environment0-40°C, <80%RH
Storage environment-10-60°C, <90%RH
Preheat time>30 minutes
Power RequirementsInput: 100VAC ~ 240VAC, 50Hz/60Hz
Output: 5V/2A DC
Battery parametersTwo 3.7V 18650 lithium batteries (Excluding batteries)
Working hours>15 hours
Power consumption1W
Size200mm*98mm*40mm
Weight600g

10. User Tips

  • Preheat for Accuracy: Allow the device to preheat for at least 30 minutes before critical measurements to ensure optimal accuracy.
  • Check Thermocouple Type: Always double-check that the thermocouple type connected matches the setting in the device for correct readings.
  • Regular Data Backup: Periodically back up your measurement data to an external storage device (U disk or SD card) to prevent data loss.
  • Software for Analysis: Utilize the Windows or Android data acquisition software for advanced analysis and visualization of your temperature data.

11. Warranty and Support

Hantek products are designed for reliability and performance. For warranty information, technical support, or service inquiries, please refer to the official Hantek website or contact your local distributor. Keep your purchase receipt as proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.