Estardyn ENS160+AHT21

Contents

Estardyn ENS160+AHT21 Gas Quality Sensor

User Manual

1. Introduction

The Estardyn ENS160+AHT21 is a digital multi-gas sensor specifically designed for indoor air quality monitoring. This advanced sensor is capable of detecting a wide range of gases and volatile organic compounds (VOCs), including toluene, hydrogen, ethanol, NO2, and ozone. Additionally, it integrates temperature and humidity sensing capabilities. It is an ideal solution for applications in home and building automation, consumer electronics, electrical appliances, and air purification systems.

2. Key Features

  • Detection of both reducing (VOC) and oxidizing gases (such as NO2).
  • MOX technology supporting up to 4 independent gas sensors.
  • Integrated sensor measurement and heater drive control for optimal performance.
  • Pre-calibrated sensor fusion and automatic baseline correction algorithms for accurate readings.
  • Multiple Indoor Air Quality (IAQ) outputs, including TVOC, eCO2, and AQL.
  • Supports I2C and SPI communication interfaces for versatile integration.
  • Fast warm-up time of less than 1 minute.
  • Operational start-up time of less than 1 hour.
  • High resistance to siloxane and humidity, ensuring durability and reliability.
  • Ease of use with selection of multi-standard air quality signals.
  • Easy integration without requiring complex software libraries, minimizing impact on the host CPU.
  • Ideal for applications requiring fast response systems.
  • Suitable for flexible and robust design implementations.

3. Specifications

AttributeValue
Brand NameEstardyn
ModelENS160+AHT21
TypeGas Sensor
TheoryInductance Sensor
OutputAnalog Sensor
UseGas Sensor
MaterialPolymer
OriginMainland China
Ambient Temperature Range-40 to +85 °C
Ambient Humidity Range5 to 95% RH
VDD (Supply Voltage)1.71 to 1.98V
Package Weight0.009 kg
Package Dimensions (L x W)18 cm x 16 cm
CustomizationYes

4. Setup Instructions

4.1 Pinout Diagram

Refer to the image below for the pin assignments on the ENS160+AHT21 sensor module. Proper connection is crucial for correct operation.

ENS160+AHT21 Sensor Module Pinout

Figure 1: ENS160+AHT21 Sensor Module Front and Back with Pin Labels

4.2 Pin Descriptions

  • INT: Interrupt pin.
  • CS: Chip Select pin (for SPI communication).
  • ADD/MISO: Address pin (for I2C) or Master In Slave Out (for SPI).
  • SDA/MOSI: Serial Data (for I2C) or Master Out Slave In (for SPI).
  • SCL/SCLK: Serial Clock (for I2C) or Serial Clock (for SPI).
  • GND: Ground connection.
  • 3V3: 3.3V power supply output.
  • VIN: Input voltage (typically 3.3V, refer to VDD specification).

4.3 Initial Power-up and Warm-up

Upon initial power-up, the sensor requires a brief warm-up period of less than 1 minute before it can begin providing readings. For full operational stability and accurate measurements, allow the sensor to run for approximately 1 hour. This allows the integrated baseline correction algorithms to stabilize.

5. Operating Instructions

The ENS160+AHT21 sensor communicates via either I2C or SPI interfaces. Consult the datasheet for detailed register maps and communication protocols specific to your chosen interface. The sensor provides multiple Indoor Air Quality (IAQ) outputs, including:

  • TVOC: Total Volatile Organic Compounds.
  • eCO2: Equivalent Carbon Dioxide.
  • AQL: Air Quality Level.

The sensor features integrated pre-calibrated sensor fusion and automatic baseline correction algorithms, which simplify data interpretation and ensure consistent performance without requiring extensive external processing.

6. Maintenance

The ENS160+AHT21 sensor is designed for robust operation and requires minimal maintenance. To ensure optimal performance and longevity:

  • Keep the sensor clean and free from dust or debris that could obstruct the sensing elements.
  • Avoid exposing the sensor to harsh chemicals or environments outside its specified operating ranges (-40 to +85 °C, 5 to 95% RH).
  • The sensor has high resistance to siloxane and humidity, contributing to its long-term stability in various indoor conditions.

7. Troubleshooting

  • No Readings/Incorrect Data:
    • Verify all wiring connections (VIN, GND, SDA/MOSI, SCL/SCLK) are secure and correct according to the pinout diagram.
    • Ensure the power supply (VDD) is within the specified range of 1.71V to 1.98V.
    • Check your microcontroller's code for correct I2C or SPI initialization and communication.
    • Allow sufficient warm-up time (at least 1 minute, ideally 1 hour for full stability) after power-up.
  • Inconsistent Readings:
    • Ensure the sensor is not exposed to sudden changes in temperature or humidity, which can temporarily affect readings.
    • Minimize air currents directly over the sensor to prevent erratic measurements.
    • Confirm the sensor is operating within its specified ambient temperature and humidity ranges.
  • Sensor Not Detected:
    • For I2C, verify the correct I2C address is being used in your code.
    • For SPI, ensure the CS pin is correctly toggled and the SPI mode is configured properly.
    • Double-check power connections.

7.1 User Tips

  • The ENS160+AHT21 offers easy integration, as no complex software library is required, which helps minimize the impact on your host CPU resources.
  • Leverage the sensor's capabilities for accurate gas readings, real-time monitoring, and improved safety measures in your projects.
  • The sensor's analog output and customization options make it versatile for various applications.

8. Warranty and Support

For specific warranty information and technical support, please refer to the official Estardyn product page or contact your retailer. Keep your purchase receipt for any warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.