TKSTAR TK403 Series 4G LTE Vehicle GPS Tracker User Manual

1. Introduction

The TKSTAR TK403 series is a state-of-the-art 4G LTE vehicle GPS tracker designed to provide comprehensive security and location monitoring for your vehicle. This device integrates advanced GPS and LBS positioning technologies, ensuring accurate tracking even in challenging environments. With its robust IP65 waterproof design and a suite of intelligent features, including remote engine cut-off, voice monitoring, and various alarms, the TK403 series offers reliable protection and peace of mind. This manual provides detailed instructions for setup, operation, and maintenance of your GPS tracker.

2. Product Features

• 4G LTE Network Support: Compatible with 2G, 3G, and 4G LTE-FDD networks for global operation.
• Real-time Tracking: Monitor your vehicle's location in real-time via mobile app, web platform, or SMS.
• History Route Playback: View historical driving routes through the dedicated application.
• Waterproof IP65: Designed to withstand water splashes and dust, suitable for various environmental conditions.
• 350mAh Backup Battery: Provides power in case of main power disconnection.
• Remote Engine Cut-off: Remotely disable the vehicle's engine for anti-theft purposes.
• Voice Monitor: Listen to the surroundings of the tracker remotely.
• SOS Function: Send emergency alerts to authorized phone numbers.
• Geo-fence: Set up virtual boundaries and receive alerts when the vehicle enters or exits them.
• Multiple Alarms: Includes Low Power, Power Off, Fuel (Optional), Overspeed, Movement, GPS Blind Spot, Door Open, ACC ON/OFF, Blind Area, and Vibration Alarms.
• GPS & LBS Positioning: Utilizes both GPS satellite and LBS (Location Based Service) for accurate positioning.

Overview of key features and functionalities.

The device is compatible with 2G/3G/4G networks, an advanced device.

Globally supports GPS satellite positioning system and can also locate via LBS, ensuring positioning even in GPS blind areas.

3. Package Contents

Upon opening the package, please verify that all the following items are included:

• TKSTAR TK403 Series GPS Tracker Unit
• Wiring Harness
• Remote Control
• Microphone
• User Manual (this document or similar)
• Relay (for engine cut-off function, may be included depending on model)

Typical package contents including the tracker, remote, and wiring.

4. Setup Guide

4.1 SIM Card Installation

1. Ensure the tracker is powered off.
2. Open the SIM card slot cover on the device.
3. Insert a 4G-compatible SIM card with active data and SMS services. Ensure the SIM card is inserted correctly according to the diagram on the device or in the included quick start guide.
4. Close the SIM card slot cover securely.

4.2 Wiring the Device

Proper wiring is crucial for the correct functioning of the GPS tracker. It is recommended to have this installed by a professional. Refer to the specific wiring diagram provided in your product's quick start guide for exact pinouts and connections. General connections typically include:

• Red Wire: Connect to vehicle's positive power supply (+12V / +24V).
• Black Wire: Connect to vehicle's negative power supply (Ground).
• Orange Wire (ACC): Connect to the vehicle's ACC (Accessory) wire, which provides power when the ignition is on.
• Yellow Wire (Relay): Connect to the relay for engine cut-off functionality.
• Other wires may be for external microphone, SOS button, door detection, etc. Consult your specific manual.

4.3 Initial Power-On

1. After wiring, turn on the vehicle's ignition.
2. The tracker's LED indicators should light up, indicating power and network connection. Refer to the quick start guide for LED status meanings.

4.4 Platform/App Setup

1. Download the official TKSTAR tracking app from your smartphone's app store (iOS/Android) or access the web tracking platform via a browser.
2. Register an account using the device's IMEI number (usually found on the device label or packaging) and follow the on-screen instructions to add your tracker.
3. Configure initial settings such as authorized numbers for SMS commands and alarm notifications.

5. Operating Instructions

5.1 Real-time Tracking

You can monitor your vehicle's location in real-time using three methods:

• Mobile App: Open the TKSTAR app, log in, and select your device to view its current location on a map.
• Web Platform: Access the web tracking platform via a computer browser, log in, and view the device's location.
• SMS: Send a specific SMS command (e.g., 'G123456#') to the tracker's SIM card number. The tracker will reply with a Google Maps link showing its current location.

Real-time tracking via APP, Platform, or SMS.

5.2 History Route Playback

The mobile app allows you to review past travel routes:

1. Open the TKSTAR app and navigate to the 'History' or 'Route Playback' section.
2. Select the desired date and time range.
3. The app will display the vehicle's route on the map for the selected period.

View historical driving routes through the APP.

5.3 Remote Control Functions (via Remote Key Fob)

The included remote key fob provides quick access to several security functions:

• ARM: Press the lock button for 0.5 seconds. The siren will beep once, indicating the system is armed.
• Deterrence/Car Search: While in the armed state, press the lock button for 0.5 seconds. The siren will beep for 10 seconds. Press the disarm button to stop the siren.
• DISARM: Press the unlock button for 0.5 seconds. The siren will beep twice, indicating the system is disarmed.
• ARM & Silent Mode: While in the disarmed state, press the mute/silent button for 0.5 seconds. The siren will beep once. If an alarm is triggered in this mode, there will be no siren sound, and the system will automatically disarm after the alarm event.
• SOS: Press the SOS button for 3 seconds. The tracker will send an SOS alert message to all authorized phone numbers without voice notification.

Detailed functions of the remote controller.

5.4 Remotely Voice Monitor

To activate voice monitoring:

1. Send the SMS command "monitor+password" (e.g., "monitor123456") to the tracker's SIM card number. The tracker will reply with "monitor ok!" and switch to monitor mode.
2. Dial the SIM card number in the tracker from an authorized phone. The tracker will automatically pick up the call, allowing you to monitor the voice around it.

Instructions for remotely monitoring voice around the tracker.

5.5 Engine Cut-off Function

This function allows you to remotely disable the vehicle's engine. Use with caution.

• Standard Cut-off: Send the command "stop+password" (e.g., "stop123456") to the tracker. The tracker will execute the command and reply "Stop engine Succeed". The vehicle will remain in an immobile state until a resume command is sent.
• Immediate Cut-off: Send the command "quickstop+password" (e.g., "quickstop123456") to the tracker. It will reply "quickstop OK". The tracker will stop the car immediately after receiving the "stop" command.
• Speed-Dependent Cut-off (Default Mode): Send the command "noquickstop+password" (e.g., "noquickstop123456") to the tracker. It will reply "noquickstop OK". The tracker will not stop the car immediately. Instead, it will reply "it will be executed after speed less than 20KM/H", and will stop the car when its speed drops below 20 KM/H.

Instructions for remotely cutting off the engine's power.

5.6 Alarm Functions

The TK403 series supports various alarms to enhance vehicle security:

• Low Power Alarm: Notifies you when the tracker's internal backup battery is low.
• Power Off Alarm: Alerts you if the main power supply to the tracker is disconnected.
• Fuel Alarm (Optional): If connected to a fuel sensor, alerts for abnormal fuel level changes.
• Overspeed Alarm: Triggers if the vehicle exceeds a preset speed limit.
• Movement Alarm: Alerts if the vehicle moves from its parked location without authorization.
• GPS Blind Spot Alert: Notifies when the tracker enters an area with no GPS signal.
• Geo-fence Alarm: Alerts when the vehicle enters or exits a predefined geographical area.
• Door Open Alarm: Triggers if a vehicle door is opened while the system is armed.
• ACC ON/OFF Alarm: Alerts when the vehicle's ignition (ACC) is turned on or off.
• Blind Area Alarm: Similar to GPS blind spot, indicates loss of signal.
• Vibration Alarm: Alerts if the vehicle experiences significant vibration or shock.

Visual representation of various alarm types.

Examples of geo-fence, movement, dropped, and shock alarms.

6. Maintenance

To ensure the longevity and optimal performance of your TKSTAR GPS tracker, follow these maintenance guidelines:

• Regular Cleaning: Keep the device clean and free from dust and debris. Use a soft, dry cloth for cleaning. Avoid using harsh chemicals or solvents.
• Power Supply Check: Periodically check the vehicle's power supply to ensure stable voltage to the tracker.
• SIM Card Status: Ensure the SIM card has sufficient credit/data and is active to maintain communication with the tracker.
• Backup Battery: The internal 350mAh backup battery is designed for emergency use. Avoid prolonged periods of main power disconnection to prevent deep discharge, which can reduce battery life.
• Firmware Updates: Check the official TKSTAR website or app for any available firmware updates to ensure your device has the latest features and bug fixes.
• Environmental Protection: Although IP65 waterproof, avoid submerging the device in water or exposing it to extreme temperatures for extended periods.

7. Troubleshooting

If you encounter issues with your TKSTAR GPS tracker, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact customer support for further assistance.

8. Specifications

9. Warranty and Support

This product is covered by a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer.

For technical support, troubleshooting assistance, or any inquiries regarding your TKSTAR GPS tracker, please contact the seller or the official TKSTAR customer service. Ensure you have your product model and IMEI number ready when seeking support.