1. Introduction
The Qingping Temperature Humidity Sensor T Version is a high-precision indoor environmental monitor designed to provide accurate temperature and humidity readings. Featuring an Electronic Ink Screen for clear visibility in various lighting conditions, it supports Thread and Bluetooth Low Energy (BLE) connectivity, seamlessly integrating with Apple HomeKit for smart home automation and remote monitoring. This manual provides essential information for setting up, operating, and maintaining your sensor.
2. Safety Information
- Keep the device away from water and high humidity environments (above 90% RH) to prevent damage.
- Do not attempt to disassemble or repair the device yourself. Refer to qualified service personnel.
- Keep batteries out of reach of children. If swallowed, seek immediate medical attention.
- Dispose of batteries according to local regulations.
- Avoid extreme temperatures and direct sunlight, which can affect sensor accuracy and battery life.
3. Package Contents
Please check the box for the following items:
- 1 x Qingping Temperature and Humidity Meter T Version
- 1 x Wall Sticker
- 1 x CR2430 Button Battery
- 1 x Instruction Manual

4. Product Overview
The Qingping Temperature Humidity Sensor T Version features a minimalist design with a clear Electronic Ink Screen. This screen provides a paper-like viewing experience, ensuring readability even in bright sunlight or under artificial lighting, thanks to its ultra-wide viewing angle and high contrast.


Product Dimensions

5. Setup
5.1 Battery Installation
- Locate the battery compartment on the back of the device.
- Open the compartment cover.
- Insert the provided CR2430 button battery, ensuring the positive (+) side faces upwards.
- Close the battery compartment cover securely.

5.2 Placement Modes
The sensor offers three flexible placement options:
- Desktop Mode: Open the built-in stand on the back of the device to place it stably on any flat surface, such as a desk or shelf.
- Wall Pattern:
- Take the wall sticker from the package and adhere it to your desired wall location.
- Attach the Qingping hygrometer to the wall sticker.
- The sensor can be rotated and adjusted on the sticker as needed without worrying about tilting.
- Magnetic Suction Mode: The sensor has a built-in magnet, allowing it to be adsorbed onto metallic surfaces like a refrigerator or other iron objects.



5.3 Initial Connection (Apple HomeKit, Thread/BLE)
The Qingping Temperature Humidity Sensor T Version supports Apple HomeKit via Thread and Bluetooth. To enable full functionality, including remote viewing and automation, a compatible home hub device is required.
- For Apple HomeKit: Ensure you have an Apple Home hub (e.g., HomePod mini, Apple TV 4K - 2nd or 3rd generation with network cable interface).
- For Thread Connection: If using Thread, you will need a home hub device that supports Thread or a third-party Thread border router. If the sensor does not automatically connect via Thread, you can press the back button twice to manually trigger the connection attempt.
- For Bluetooth Connection: The sensor can connect directly via Bluetooth to your smartphone for local readings using the Qingping+ APP.


6. Operating Instructions
6.1 Reading the Display
The Electronic Ink Screen clearly displays the current temperature (in °C or °F) and relative humidity (%RH). The display is designed for optimal readability from a wide perspective.

6.2 Connecting to Qingping+ APP
To view and download historical temperature and humidity data, you need to use the Qingping+ APP. This functionality requires a home central device, such as an Apple HomePod or Apple TV, to act as a hub for data collection and synchronization.

6.3 Apple HomeKit and Siri Support
The sensor supports Apple HomeKit, allowing you to check temperature and humidity anytime, anywhere, and link with other intelligent devices. Remote viewing and setting up automation routines require a home hub device (HomePod or Apple TV). With a home hub, you can also use Siri to inquire about the current temperature and humidity.


7. Maintenance
7.1 Battery Replacement
The sensor uses a CR2430 button battery, which typically lasts 8-12 months at common room temperature. When the battery indicator on the display shows low power, replace the battery following the steps in Section 5.1.
7.2 Cleaning
Wipe the device gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as they may damage the screen or internal components.
7.3 Environmental Considerations
The sensor is designed for non-condensing environments. Avoid using it for extended periods in areas where humidity exceeds 90% RH, as this can affect its accuracy and lifespan.
8. Troubleshooting
- Display is blank: Check if the battery is correctly installed and has sufficient charge. Replace the CR2430 battery if necessary.
- Inaccurate readings: Ensure the sensor is placed in a stable environment away from direct heat sources, vents, or direct sunlight. Avoid areas with rapid temperature or humidity fluctuations.
- Cannot connect to HomeKit/APP:
- Verify your Apple Home hub (HomePod mini, Apple TV) is powered on and connected to the internet.
- Ensure Bluetooth is enabled on your smartphone when using the Qingping+ APP for initial setup.
- If using Thread, confirm your home hub supports Thread or you have a Thread border router. Try pressing the sensor's back button twice to manually trigger Thread connection.
- Restart the sensor by removing and reinserting the battery.
9. Specifications
| Feature | Specification |
|---|---|
| Product Name | Qingping Temperature And Humidity Meter t Version |
| Product Model | CGG1T |
| Product Size | 74 x 74 x 14 mm |
| Product Weight | 54g |
| Product Color | White |
| Screen Size | 55 x 55 mm |
| Temperature Range | 0~50 ℃ |
| Humidity Range | 0~99.9% RH (non-condensing environment) |
| Wireless Network | Thread, Bluetooth |
| Battery Type | CR2430 Button Battery |
| Power Source | DC (Battery Powered) |
| Control Channels | 2 CHANNELS |
| Inbox Adaptor | No |
| Certification | FCC, RoHS, CE |

10. User Tips
- For optimal accuracy, place the sensor in a central location within the room, away from direct drafts, windows, or heating/cooling vents.
- If you experience connectivity issues with Thread, ensure your HomePod mini or Apple TV is updated to the latest software version.
- The 'Somatosensory Comfort Zone' chart (Figure 16) can help you understand ideal temperature and humidity ranges for comfort.

11. Warranty and Support
This product comes with a 1-year warranty. For technical support, troubleshooting assistance, or warranty claims, please contact the seller or refer to the official Qingping website for detailed support resources.