1. Introduction
The Sunon PE602 is a high-quality quartz watch movement featuring advanced chronograph functions and a date display. It is engineered for precision timekeeping and includes a sweep second hand, chronograph center second, chronograph minute, and 24-hour subdials. This manual provides essential information for the proper installation, operation, and maintenance of your PE602 movement.

2. Specifications
The following table details the key specifications of the Sunon PE602 Quartz Watch Movement:
| Feature | Description |
|---|---|
| Item Type | Movement |
| Movement Type | Quartz |
| Height | 4.52mm |
| Hands Configuration | 6 Hands / Date |
| Functions | Chrono center second, Chrono minute, 24-hour display |
| Battery Type | SR920SW |
| Date Wheel Font | English |
| Date Wheel Colors | White |
| Origin | Mainland China |


3. Installation and Setup
Installing a watch movement requires precision and appropriate tools. It is recommended that installation be performed by a qualified watchmaker or experienced hobbyist.
3.1. General Installation Steps
- Carefully remove the old movement from the watch case, if applicable.
- Ensure the new PE602 movement fits correctly into the watch case.
- Attach the dial and hands to the movement.
- Insert the stem and crown.
- Secure the movement within the case using movement rings or screws.
- Close the watch case back.
3.2. Date Wheel Adjustment Demonstration
The following video demonstrates the date wheel adjustment process for the PE602 movement:

4. Operating Instructions
4.1. Time Setting
- Pull the crown out to Position 2 (the outermost position).
- Rotate the crown to set the hour and minute hands to the desired time.
- Push the crown back to Position 0 (normal operating position) to start the watch.
4.2. Date Setting
- Pull the crown out to Position 1 (the first click).
- Rotate the crown to adjust the date.
- Push the crown back to Position 0.
Note: Avoid setting the date between 9 PM and 3 AM, as this can damage the date mechanism.
4.3. Chronograph Operation
The PE602 movement features a chronograph function for measuring elapsed time.
- Start: Press the upper pusher to start the chronograph (the large center second hand will begin to move).
- Stop: Press the upper pusher again to stop the chronograph. The elapsed time will be indicated by the chronograph hands.
- Reset: With the chronograph stopped, press the lower pusher to reset all chronograph hands to their zero positions.
4.4. Subdial Functions
- Small Second Hand: This subdial typically displays the continuous running seconds of the watch.
- Chrono Center Second: The large center second hand is dedicated to the chronograph function.
- Chrono Minute Subdial: This subdial records the elapsed minutes during chronograph operation.
- 24-Hour Subdial: This subdial indicates the time in a 24-hour format, often synchronized with the main hour hand.
5. Maintenance
Proper maintenance ensures the longevity and accuracy of your PE602 movement.
5.1. Battery Replacement
The PE602 movement uses an SR920SW battery. When the watch stops or the second hand begins to jump erratically (End-of-Life indicator), it's time to replace the battery. This procedure should ideally be performed by a professional watchmaker to avoid damaging the movement or compromising water resistance.
5.2. Cleaning
Keep the movement free from dust and moisture. If the watch case is opened, ensure no dust particles enter the movement. For internal cleaning, professional service is recommended.
5.3. Professional Service
For any complex repairs, adjustments, or routine servicing, it is highly recommended to consult a certified watch technician. Attempting repairs without proper knowledge and tools can cause irreversible damage.

6. Troubleshooting
If you encounter issues with your PE602 movement, consider the following common problems and solutions:
- Watch Not Running: Check if the battery needs replacement (SR920SW). Ensure the crown is pushed fully into Position 0.
- Date Not Changing: Verify that the date is not being set during the restricted hours (9 PM - 3 AM). Re-adjust the date as per Section 4.2.
- Chronograph Not Resetting to Zero: Perform a chronograph reset by pressing the lower pusher after stopping the chronograph. If the issue persists, a professional adjustment may be required.
- Inaccurate Timekeeping: This could indicate a low battery or a need for professional servicing.
7. User Tips
Based on common user inquiries, here are some helpful tips for your PE602 movement:
- Subdial Clarification: The small subdial at the 6 o'clock position typically functions as the continuous running seconds for the watch. The large center second hand is specifically for the chronograph function.
- Battery Type: Always use an SR920SW battery for replacement to ensure optimal performance and compatibility.
- Case Compatibility: While the PE602 is a common movement, always verify its dimensions (especially height: 4.52mm) and stem position for compatibility with specific watch cases, such as those designed for VK63 movements.
8. Warranty and Support
For any questions regarding the Sunon PE602 movement, technical assistance, or warranty claims, please contact the seller or an authorized service center. Keep your purchase records for reference.