1. Introduction
Thank you for choosing the Dooya T10 Intelligent WIFI Voice Electric Curtain Motor. This motor is designed to automate your curtains, offering convenience through smart control via WiFi, voice commands, and traditional manual operation. It integrates seamlessly with smart home ecosystems like Tuya, Xiaoai Classmate, and Mijia APP, providing features such as electronic travel memory, obstruction protection, and manual pull functionality during power outages.

2. Safety Information
- Always disconnect power before installation, maintenance, or troubleshooting.
- Installation should be performed by a qualified electrician or experienced individual familiar with electrical wiring.
- Ensure the motor is securely mounted to prevent it from falling.
- Keep hands and loose clothing away from moving parts of the curtain system.
- Do not expose the motor to water or excessive moisture.
- This device is for indoor use only.
3. Package Contents
Please check the package for the following items:
- Dooya T10 Electric Curtain Motor
- User Manual (this document)
- Mounting accessories (brackets, screws - exact items may vary)
4. Specifications
| Feature | Specification |
|---|---|
| Model Number | Dooya T10 |
| Voltage | 110-240V |
| Wattage | 13W |
| Torque Force | 1.2Nm |
| Speed | 14cm/s |
| Transmission Frequency | 433MHz |
| Dimensions (L x W x H) | 342 mm x 44 mm x 68 mm |
| Main Functions | Electronic travel memory, power outage manual pull, obstruction protection, manual start, external WiFi module, support for Xiaoai Classmate and Mijia APP. |

5. Setup and Installation
5.1 Mounting the Motor
- Ensure the curtain track is correctly installed and secure.
- Attach the motor mounting brackets to the track according to the track manufacturer's instructions.
- Slide the Dooya T10 motor into the brackets until it clicks securely into place. Ensure the drive shaft aligns with the curtain runner mechanism.
5.2 Wiring the Motor
The Dooya T10 is a five-wire motor. Proper wiring is crucial for safe and correct operation. Refer to the diagram below and consult a qualified electrician if unsure.

- Power Line: Connect the main power supply (110-240V) to the motor's power line. Typically, this involves Live, Neutral, and Ground wires.
- Control Wires: The remaining two wires are for control (Open/Close signals). Connect these to your control switch or smart home relay as per your system's requirements.
- Ensure all connections are secure and insulated.
WARNING: Incorrect wiring can cause damage to the motor or pose an electrical hazard. Always follow local electrical codes.
5.3 Initial Power-Up and Limit Setting
- After wiring, restore power to the motor.
- The motor may perform a short calibration movement.
- Setting Travel Limits: The Dooya T10 features electronic travel memory. Use the "Settings key" (refer to Figure 2) and your control method (e.g., remote, app) to set the fully open and fully closed positions of your curtains. Consult the specific instructions for your remote or app for detailed limit setting procedures.
6. Operating Instructions
6.1 Smart Home Integration (Tuya, Xiaoai, Mijia)
- Download and install the Tuya Smart, Xiaoai Classmate, or Mijia APP on your smartphone.
- Open the wiring compartment (refer to Figure 2) to access the "Distribution network button".
- Press and hold the "Distribution network button" until the "Distribution network indicator light" starts flashing, indicating pairing mode.
- Follow the in-app instructions to add the device and connect it to your home WiFi network.
- Once connected, you can control your curtains via the app, set schedules, and integrate with other smart home devices.
6.2 Voice Control
After successful integration with Tuya, Xiaoai Classmate, or Mijia, you can link your motor to compatible voice assistants (e.g., Amazon Alexa, Google Assistant, Xiaomi AI Speaker) through the respective smart home app. Use commands like:
- "Alexa, open the living room curtains."
- "Hey Google, close the bedroom blinds."
- "Xiaoai, set the curtains to 50%."
6.3 Manual Operation
- Manual Start: Gently pull the curtain fabric in the desired direction, and the motor will automatically take over and complete the movement.
- Power Outage Manual Pull: In case of a power failure, the motor allows for manual pulling of the curtains without resistance.
7. Maintenance
- Keep the motor and track clean from dust and debris to ensure smooth operation.
- Periodically check all wiring connections for tightness and signs of wear.
- Do not lubricate the motor's internal components.
- If the motor makes unusual noises or movements, disconnect power and consult the troubleshooting section.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Motor does not respond to commands. | No power; loose wiring; remote/app not paired; motor in protection mode. | Check power supply and wiring. Re-pair remote/app. Disconnect power for 30 seconds and reconnect. |
| Curtains stop mid-way or reverse. | Obstruction in track; limits not set correctly; motor overheating. | Clear any obstructions. Re-set travel limits. Allow motor to cool down if it has been running continuously. |
| WiFi connection issues. | Incorrect WiFi password; motor too far from router; router issues. | Verify WiFi password. Move router closer or use a WiFi extender. Restart router. Re-initiate pairing mode on motor. |
| Voice control not working. | Not linked to voice assistant; incorrect device name; internet connectivity issues. | Ensure motor is linked in the smart home app. Check device name in voice assistant app. Verify internet connection. |
9. User Tips
- For optimal performance, ensure your WiFi network is stable and the motor is within good signal range.
- Regularly check for firmware updates through the Tuya/Mijia app to benefit from new features and improvements.
- When setting travel limits, be precise to avoid unnecessary strain on the motor or curtain fabric.
- Consider integrating the motor with smart home routines for automated opening/closing based on time of day or other sensor triggers.
10. Warranty and Support
Dooya products are manufactured to high-quality standards. For warranty information and technical support, please refer to the seller's specific terms or contact Dooya customer service directly. Keep your purchase receipt as proof of purchase.