ALTHY U200PRO Under Sink Drinking Water Filter Purifier

1. Introduction

Thank you for choosing the ALTHY U200PRO Under Sink Drinking Water Filter Purifier. This system is designed to provide safe, healthy, and delicious drinking water by effectively filtering municipal water. It utilizes German innovative multi-stage filtration technology, including PPF, KDF, ACF high-quality activated carbon fiber, AGF silver ion antibacterial activated carbon, and MetSorb Heavy metal filtration.

The U200PRO is certified to reduce chlorine, lead, fluorine, heavy metals, VOCs, odors, and other harmful pollutants, while retaining beneficial natural minerals. This system does not reduce Total Dissolved Solids (TDS), as TDS is not a direct measure of water quality and the presence of minerals contributes to higher TDS levels.

Image: Diagram illustrating the compact 5-in-1 filtration technology of the U200PRO compared to traditional multi-cartridge systems.

2. Safety Precautions

Please read and adhere to all precautions to prevent product damage or personal injury.

• Prohibition: Do not use accessories not approved by ALTHY. Using unauthorized accessories will void the warranty and may cause mechanical failure. In case of failure, immediately turn off the main water supply and do not operate the defective product.
• Warning: Children and individuals with disabilities should use this product under the supervision of a guardian. All installation pipelines must comply with international safety standards.
• Attention:
  • If purchasing accessories separately, choose high-quality products.
  • This product is designed for municipal tap water only.
  • Applicable water pressure: 15-100 psi (100-689 kPa). If water pressure exceeds this range, install a pressure reducing valve.
  • Applicable water temperature: 5°C to 38°C (41°F to 100°F).
  • For indoor installation only. Ensure a reliable floor drain is within 1.5 meters of the installation site to prevent water damage from potential leaks.
  • If the product is not used or left unattended for more than 3 days, turn off the water source to prevent damage or leaks.

3. Package Contents

Verify that all the following items are included in your package:

Image: Visual representation of all components included in the box.

• Water purifier (with 1 filter pre-installed)
• Water purifier faucet
• Faucet bracket
• Raw tape (Teflon tape)
• Direct connect adapter
• PE pipe
• G1/2" Three-way valve
• User Manual
• Expansion screws (3 pcs)
• Buckles for water purifier connector (5 pcs)
• Additional filter (1 pc)

NOTE: There are 2 filters included; one is packed inside the host unit. Please tear off the protective film from the filter before use.

4. Installation Guide

The ALTHY U200PRO offers a flexible and convenient water supply. The recommended installation method is as follows. If you are unsure, please consult a professional.

Image: Diagram showing the connection of the water purifier to the cold water line and dedicated faucet.

1. Select Installation Location: Choose a suitable location under your sink. A floor drain is recommended near the installation area for safety.
2. Connect to Water Supply: Connect the water purifier to your household cold water tap point using the provided three-way valve and PE pipe.
   • When installing pipe joints, wrap joints without gaskets with an appropriate amount of raw material tape (Teflon tape) to ensure a watertight seal.
   • Ensure the PE pipe is fully inserted into the connectors to prevent leaks.
3. Prepare Filter: Unscrew the filter bottle counter-clockwise to remove the filter element. Tear off the protective film from the new filter element, then screw it into the base. Place it back into the filter bottle and tighten the filter bottle clockwise by hand.
4. Flush the System: Open the three-way valve and turn on the water purifier faucet. Flush the water for at least 10 minutes until the water runs clear. This purges air and any loose carbon particles from the filter.
5. After flushing, turn off the faucet. The system is now ready for normal use.

For a visual guide, please refer to the installation image provided in the manual or product listing.

5. Operation

Once installed, the ALTHY U200PRO provides filtered water on demand through its dedicated faucet. Simply turn on the faucet to dispense purified water for drinking, cooking, and washing fruits and vegetables.

Image: Demonstrating the use of filtered water for drinking and washing.

6. Maintenance: Filter Replacement

The filter element should be replaced every 6-12 months or after filtering 8,000 gallons of water, depending on your water quality and usage. Regular replacement ensures optimal filtration performance.

Image: Diagram highlighting the 1-minute filter replacement process and filter lifespan.

1. Shut Off Water: Close the three-way valve to stop the water supply to the purifier.
2. Drain System: Open the water purifier faucet to drain any remaining water from the system.
3. Remove Old Filter: Unscrew the filter bottle counter-clockwise by hand. Remove the old filter element.
4. Install New Filter: Tear off the protective film from the new filter element. Screw it into the base, then place it back into the filter bottle and tighten the filter bottle clockwise by hand.
5. Flush New Filter: Open the three-way valve and turn on the water purifier faucet. Flush with water for at least 5 minutes until the water runs clear.

Replacement filters can be found by searching for "ALTHY U200PRO" on the seller's platform.

7. Troubleshooting

If you encounter any issues with your ALTHY U200PRO, refer to the table below for common problems and solutions.

8. Specifications

Image: Detailed diagram of the 5-stage filtration process, showing contaminants removed and minerals retained.

Image: Example installation under a sink, illustrating the compact size and key specifications.

9. User Tips

• Easy Installation: Many users find the installation straightforward, especially with newer sinks designed for tap installations. The system is designed to be discrete under the sink.
• Leak Prevention: Ensure all hoses and connections are properly sealed. Using the provided Teflon tape on threaded joints is crucial to prevent leaks, even with high-pressure water systems.
• Faucet Placement: Pay attention to the placement of the dedicated faucet to ensure it is stable and convenient for use.
• Check Local Pipe Sizes: Before installation, verify your local pipe sizes (e.g., 3/8" vs. 1/2") and have any necessary adapters ready. The included G1/2" three-way valve is standard, but local variations may require additional fittings.
• Filter Orientation: The main filter unit is designed to be installed vertically, as depicted in the installation diagrams. This ensures proper water flow and filter performance.
• Water Quality Testing: Note that this filter retains beneficial minerals and therefore does not significantly reduce TDS (Total Dissolved Solids). A TDS meter is not an accurate tool to assess the effectiveness of this specific filter. Instead, focus on improvements in taste, odor, and clarity of the water.

10. Warranty and Support

The ALTHY U200PRO comes with a One Year Guarantee. ALTHY is committed to providing world-class quality water filtration solutions.

If you are not satisfied with your purchase or have any questions during the product lifecycle, please contact ALTHY customer service. Our trained water experts are available to assist you.

For a detailed user manual in PDF format, you can refer to the official document: ALTHY U200PRO User Manual (PDF).