1. Introduction
The FENVI USB 3.0 to RJ45 Network Adapter provides a high-speed, stable, and reliable wired Ethernet connection for devices lacking a built-in Ethernet port. With support for up to 1000Mbps transmission, it is an ideal solution for laptops, Macbooks, and compatible Android devices, enhancing your network experience for fast downloads, gaming, and video streaming.
Figure 1: FENVI USB 3.0 to RJ45 Network Adapter
Video 1: FENVI USB 3.0 Ethernet Adapter Product Overview
2. Setup Instructions
- Connect to Device: Insert the USB 3.0 connector of the adapter into an available USB 3.0 port on your laptop, Macbook, desktop computer, or compatible Android device.
- Connect to Network: Plug a standard RJ45 Ethernet cable from your router or modem into the RJ45 port on the adapter.
- Driver Installation:
- For Windows 7/8/10/11 and Mac OS, the adapter is generally plug-and-play (drive-free) and should be recognized automatically.
- For other operating systems, a driver may be required. Please contact customer service for driver assistance if needed.
- Compatibility Notes:
- Supports Android mobile phone systems, Android tablets, Xiaomi, Huawei, OPOP, VOVO devices. An arrow in the upper left corner of the mobile phone screen indicates normal operation after networking.
- Supports desktop computer hosts, all-in-one computers, and notebook computers.
- Supports Xiaomi Mi Box (4th generation and above).
- NOT compatible with Nintendo Switch.
- NOT compatible with other TV boxes except for Xiaomi Mi Box (4th generation and above).
Figure 2: Connecting the adapter to a laptop for super-speed network
Figure 3: USB 3.0 to RJ45 Interface and Indicator Lights
3. Operating Instructions
Once connected and recognized by your device, the adapter will automatically establish a wired network connection. Observe the indicator lights for status:
- Green Light: The green light on the adapter will be continuously on, indicating that the device is powered and connected.
- Yellow Light: The yellow light will flash during use, indicating active data transfer.
Figure 4: Indicator Lights for Link and Activity
4. Maintenance
- Cable Quality: Ensure you use a good quality Ethernet cable (Cat5e or higher recommended). The module may heat up significantly if the connected cable is of poor quality or below Cat5e specification.
- Storage: Store the adapter in a cool, dry place when not in use.
- Cleaning: Use a soft, dry cloth to clean the adapter. Avoid using liquid cleaners.
5. Troubleshooting
- Adapter Not Recognized:
- Ensure the USB 3.0 connector is fully inserted into a working USB port.
- Try connecting to a different USB port.
- If using an unsupported operating system (not Windows 7/8/10/11 or Mac OS), a driver may be needed. Contact customer service for assistance.
- No Network Connection:
- Verify that the Ethernet cable is securely connected to both the adapter and your router/modem.
- Check if your router/modem is functioning correctly.
- Ensure the green indicator light on the adapter is on. If not, check the USB connection.
- Slow Network Speed:
- Ensure you are using a USB 3.0 port on your device for optimal performance.
- Verify the quality of your Ethernet cable (Cat5e or higher recommended).
- Check your internet service provider's speed and your router's capabilities.
- Xiaomi Mi Box (4th generation and above) Issue: If the Mi Box enters a sleep state, the adapter may not automatically wake up due to weak power supply. Re-insert the adapter into the Mi Box to restore functionality.
- Overheating: If the adapter feels excessively hot, ensure the Ethernet cable used is of good quality (Cat5e or higher). Poor quality cables can cause the module to heat up.
- General Issues: If you encounter any other problems, please contact our online customer service for support.
6. Specifications
| Feature | Detail |
|---|---|
| Model Name | USB3.0 TO RJ45 1000M |
| Brand Name | FENVI |
| Color | Black |
| Chip | RTL8153 |
| Interface Type | USB 3.0 |
| Adapter Socket | RJ45 |
| Transmission Rate | 10/100/1000Mbps |
| Wired Transmission Rate | 1000m |
| Lan Transmission Rate | Ethernet |
| Applicable Network Type | Fast Ethernet |
| Wi-Fi Supported Frequency | 2.4G & 5G (Note: This adapter provides wired connectivity, Wi-Fi support refers to compatibility with systems that may also use Wi-Fi) |
| Wireless Protocol | 802.11n, 802.11a/g, 802.11ac (Note: This adapter provides wired connectivity, wireless protocols refer to compatibility with systems that may also use these standards) |
| Supported Systems | Windows XP/7/8.11/10/11/Vista, Macintosh OSX 10.6/10.7, Android mobile/tablet (specific models) |
| Compatible Standards | IEEE 802.3, 802.3u and 802.3ab (10 Base-T, 100Base-TX and 1000Base-T) |
| Length (Cable) | 20CM |
| Package Dimensions (L x W x H) | 21cm x 12cm x 2cm |
| Package Weight | 0.076 kg |
| Certification | CE |
7. Warranty and Support
For any product issues, technical support, or driver requests for unsupported operating systems, please contact FENVI customer service. Your satisfaction is important to us, and we are committed to assisting you.
A detailed user manual in PDF format is also available for download: View User Manual (PDF)
8. User Tips
- Driver-Free Convenience: For Windows 7/8/10/11 and Mac OS, the adapter typically works without needing to install additional drivers, making setup quick and easy.
- Achieve High Speeds: Many users report achieving speeds close to 1 Gigabit, confirming the adapter's high-quality transmission capabilities.
- Stable Wired Connection: This adapter provides reliable wired network connectivity, which is often more stable than Wi-Fi, especially for demanding tasks like online gaming or large file transfers.
- Broad Compatibility: The adapter's compatibility with various operating systems and devices, including specific Android phones/tablets and Xiaomi Mi Boxes, makes it a versatile networking tool.