HYULIGHTS HYU-150B

Contents

HYULIGHTS HYU-150B Mini LED Moving Head Light

Double Sides Wash & Beam Stage Lighting Effect

Model: HYU-150B | Brand: HYULIGHTS

1. Introduction

Thank you for purchasing the HYULIGHTS HYU-150B Mini LED Moving Head Light. This versatile lighting fixture combines both wash and beam effects, offering dynamic lighting for various occasions such as stages, night clubs, discos, hotels, shops, and family birthday parties. Featuring RGBW LEDs, DMX control, and infinite rotation, this light is designed for professional stage and DJ use. Please read this manual carefully before operation to ensure safe and proper use.

2. Safety Information

  • Always ensure the unit is connected to a grounded power source.
  • Minimum distance of inflammable materials from the surface: 0.20m.
  • Maximum temperature of the external surface: 120°C.
  • Do not open the housing; there are no user-serviceable parts inside. Refer all servicing to qualified personnel.
  • Avoid direct eye exposure to the light source.
  • Ensure adequate ventilation around the unit.
  • Disconnect from power before cleaning or servicing.
Rear view of the HYULIGHTS HYU-150B Mini LED Moving Head Light showing warning labels, DMX IN/OUT ports, and Power IN connection.
Rear view of the device with warning labels and connection ports.

3. Package Contents

Upon unpacking, please verify that all items listed below are included and in good condition:

  • 1 x HYULIGHTS HYU-150B Mini LED Moving Head Light
  • 1 x Power Cable
  • 1 x User Manual
  • 1 x DMX Cable
  • 1 x Bow Mount with 2PCS Screws (for installation)
Contents of the product package including the moving head light, power cable, DMX cable, bow mount, and user manual.
Product and accessories included in the box.

4. Specifications

FeatureSpecification
Model NumberHYU-150B
Power Consumption100W
Input VoltageAC90-240V, 50-60HZ
LED Source4 Pcs 12W RGBW Wash + 1 Pcs 15W RGBW Beam
Color16.7 million kinds of color change
Lens AngleWash 40°, Beam 8°
DMX Channels15/21 DMX Channels
Pan/Tilt540° (X-axis), 360° infinite rotation (Y-axis)
Dimmer0-100% with regulated constant color control
Strobe20 Flashes per second (any color)
Control ModesAuto, Sound, DMX, Master/Slave, Advanced Built-in Programs
Product Size17 x 15 x 25 cm
Net Weight (N.W.)2.5 KG
Gross Weight (G.W.)3.2 KG
Packing Size29 x 19 x 21 cm
CertificationCE, FCC, RoHS, WEEE

5. Setup

5.1 Mounting

The HYU-150B can be mounted in various positions using the included bow mount and screws. Ensure the mounting surface or truss is capable of supporting the weight of the fixture. Always secure the fixture with a safety cable (not included) to prevent accidental drops.

5.2 Power Connection

Connect the provided power cable to the 'POWER IN' port on the rear of the unit and then to a suitable AC90-240V, 50-60HZ power outlet. Ensure the power source is grounded.

5.3 DMX Connection (Optional)

For DMX control, connect a DMX cable from your DMX controller's 'DMX OUT' to the 'DMX IN' port of the first fixture. For multiple fixtures, daisy-chain them by connecting the 'DMX OUT' of the first fixture to the 'DMX IN' of the next, and so on. Terminate the last fixture in the chain with a DMX terminator (not included) for optimal signal integrity.

6. Operating Instructions

6.1 Control Panel

The unit features a 4-digit LED display and four control buttons: MENU, DOWN, UP, and ENTER. Use these buttons to navigate through the settings and select desired operating modes and parameters.

Front view of the HYULIGHTS HYU-150B Mini LED Moving Head Light showing the control panel with a 4-digit display and four buttons: MENU, DOWN, UP, ENTER.
Control panel for mode and setting selection.

6.2 Operating Modes

The HYU-150B supports several operating modes:

  • Auto Mode: The fixture runs through pre-programmed light shows automatically.
  • Sound Active Mode: The light reacts to music or sound detected by the built-in microphone.
  • DMX Mode: Allows external control via a DMX controller using 15 or 21 DMX channels.
  • Master/Slave Mode: Link multiple fixtures where one acts as the master, controlling the others (slaves) to synchronize effects.

6.3 Light Effects and Movement

  • Wash Effect: Provides a wide, soft beam of light (40° lens angle).
  • Beam Effect: Produces a narrow, focused beam of light (8° lens angle).
  • Color Mixing: Capable of producing 16.7 million colors using RGBW LEDs.
  • Dimmer: Smooth 0-100% linear dimming for precise brightness control.
  • Strobe: Adjustable strobe effect with up to 20 flashes per second.
  • Pan/Tilt: Offers 540° movement on the X-axis (Pan) and 360° infinite rotation on the Y-axis (Tilt) for dynamic positioning.
The moving head light in wash mode, emitting a red light.
Wash effect (red light).
The moving head light in beam mode, emitting a red light.
Beam effect (red light).
The moving head light in wash mode, emitting a green light.
Wash effect (green light).
The moving head light in beam mode, emitting a white light.
Beam effect (white light).

6.4 Product Demonstration Video

Watch a demonstration of the HYULIGHTS HYU-150B's various lighting effects and movements.

7. Maintenance

  • Cleaning: Regularly clean the lenses and housing with a soft, lint-free cloth to maintain optimal light output and prevent overheating. Do not use abrasive cleaners.
  • Ventilation: Ensure that the ventilation openings are clear of dust and debris to prevent overheating.
  • Inspection: Periodically check all cables, connections, and mounting hardware for any signs of wear or damage. Replace any damaged components immediately.
  • Storage: When not in use, store the fixture in a dry, dust-free environment.

8. Troubleshooting

  • No Power: Check the power cable connection, the power outlet, and any fuses or circuit breakers.
  • No Light Output: Verify the fixture is receiving power and is not in a blackout or dimmed state. Check DMX settings if applicable.
  • No Movement: Ensure the fixture is not in a frozen or static mode. Check DMX connections and settings for pan/tilt control.
  • DMX Issues: Confirm correct DMX addressing, proper cable connections (DMX IN/OUT), and the use of a DMX terminator on the last fixture.
  • Overheating: Ensure adequate ventilation and that the fan is operating correctly. Clean any dust from vents.

9. User Tips

  • For best results in DMX mode, ensure each fixture has a unique DMX address.
  • Experiment with different control modes (Auto, Sound, DMX) to find the best fit for your event.
  • Utilize the infinite Y-axis rotation for unique and dynamic aerial effects.

10. Warranty & Support

This product is certified with CE, FCC, RoHS, and WEEE standards, ensuring quality and compliance. For any technical support, warranty claims, or service inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.