1. Product Overview
The T&G TG166 is a compact and portable Bluetooth speaker designed for wireless audio playback from various devices. It features Bluetooth 5.0 connectivity, a built-in microphone for hands-free calls, and support for TF card and USB disk playback. Its robust design makes it suitable for both indoor and outdoor use.
2. Package Contents
- 1 x TG166 Bluetooth Speaker
- 1 x USB Charging Cable
- 1 x User Manual
3. Device Layout
Familiarize yourself with the speaker's buttons and ports:
- M Button: Mode switch (Bluetooth, TF Card, USB Disk).
- '-' Button: Volume down / Previous track.
- '+' Button: Volume up / Next track.
- Play/Pause Button: Play/Pause music, Answer/End calls.
- Micro USB Port: For charging the speaker.
- TF Card Slot: Insert a TF (MicroSD) card for direct music playback.
- USB-A Port: Insert a USB disk (UDisk) for direct music playback.
- ON/OFF Switch: Power on or off the speaker.
4. Setup and First Use
4.1 Charging the Speaker
- Connect the provided USB charging cable to the Micro USB port on the speaker.
- Connect the other end of the USB cable to a 5V/500mA USB power adapter (not included) or a computer's USB port.
- The charging indicator light will illuminate.
- A full charge takes approximately 2-3 hours. The indicator light will turn off or change color once fully charged.
4.2 Powering On/Off
- To power on, slide the ON/OFF switch to the 'ON' position. You will hear an audible prompt.
- To power off, slide the ON/OFF switch to the 'OFF' position.
4.3 Bluetooth Pairing
- Ensure the speaker is powered on and in Bluetooth mode (indicated by an audible prompt or flashing LED).
- Enable Bluetooth on your smartphone, tablet, or other Bluetooth-enabled device.
- Search for available Bluetooth devices and select "TG166" from the list.
- Once paired, you will hear a confirmation sound, and the LED indicator will stop flashing.
- The speaker supports L2CAP/A2DP/AVRCP for stereo audio and HSP/HFP for hands-free communication.
5. Operating Instructions
5.1 Music Playback
- Bluetooth Mode: After successful pairing, play music from your connected device. Use the '+', '-', and Play/Pause buttons on the speaker to control playback.
- TF Card/USB Disk Mode: Insert a TF card or USB disk (with MP3 audio files) into the respective slot. The speaker will automatically switch to the corresponding mode and begin playback. Use the '+', '-', and Play/Pause buttons for control.
- Mode Switching: Press the 'M' button to cycle through available modes (Bluetooth, TF Card, USB Disk).
5.2 Hands-Free Calling
- When a call comes in while connected via Bluetooth, press the Play/Pause button to answer.
- Press the Play/Pause button again to end the call.
- The built-in microphone allows for clear voice communication.
5.3 True Wireless Stereo (TWS) Function
The TWS function allows you to connect two TG166 speakers wirelessly to create a stereo sound system, enhancing the audio experience with 10W total power and surround sound.
- Ensure both TG166 speakers are powered off.
- Power on both speakers simultaneously.
- On one speaker, double-press the 'M' button. The speakers will attempt to pair with each other.
- Once successfully paired, you will hear a confirmation tone. The LED indicator on one speaker will flash (master), and the other will be solid (slave).
- Now, connect your device to the master speaker via Bluetooth as described in section 4.3. Both speakers will play audio in stereo.
6. Maintenance and Care
- Keep the speaker away from extreme temperatures, direct sunlight, and dusty environments.
- Although the speaker is waterproof, avoid submerging it in water for extended periods.
- Clean the speaker with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- When not in use for a long time, charge the battery at least once every three months to prolong its lifespan.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Speaker does not power on | Low battery; Power switch off | Charge the speaker; Ensure power switch is ON. |
| Cannot pair via Bluetooth | Speaker not in pairing mode; Device Bluetooth off; Too far apart | Ensure speaker is in Bluetooth mode; Turn on device Bluetooth; Keep devices within 10m range. |
| No sound during playback | Volume too low; Incorrect mode; File format not supported | Increase volume on speaker and device; Switch to correct mode (Bluetooth, TF, USB); Ensure MP3 format for TF/USB. |
| TWS pairing fails | Speakers not reset; Incorrect pairing steps | Ensure both speakers are off before starting TWS pairing; Follow TWS steps carefully. |
| No AUX input | The TG166 model does not feature a dedicated AUX input port. | Use Bluetooth, TF card, or USB disk for audio input. |
8. Specifications
| Feature | Specification |
|---|---|
| Brand Name | T&G |
| Model | TG166 |
| Bluetooth Version | 5.0 |
| Wireless Transmission Range | Up to 10 meters |
| Audio Noise Ratio | ≥90dB |
| Battery Capacity | 500mAh |
| Built-in Voltage | 3.7V |
| Normal Volume Playback Time | Approx. 2 hours |
| Speaker Specifications | ¢45mm * 1 |
| Speaker Power | 4Ω / 5W * 1 |
| Frequency Response | 120Hz-20KHz |
| Dimensions (L*W*H) | 86.5 * 72.3 * 31.6 mm |
| Weight | Approx. 172g |
| Charging Voltage | 5V / 500mA |
| Charging Time | 2-3 hours |
| Input/Output | USB |
| Number of Devices Connectable Simultaneously | 2 (via TWS) |
| Touch Screen | No |
| Voice Control | Yes |
| Waterproof | Yes |
| Built-in Microphone | Yes |
| Support Memory Card | Yes (TF Card) |
| Playback Function | MP3 |
| Certification | CE |
9. User Tips
- Volume Control: The speaker has its own volume control separate from your connected device. Adjust both for optimal sound.
- FM Radio: While not officially listed in specifications, some users have reported the possibility of configuring an FM radio function. Explore the 'M' (Mode) button for additional modes beyond Bluetooth, TF, and USB.
- Portability: The compact size and included strap make it ideal for carrying. Use the strap for secure transport.
10. Warranty and Support
For warranty information or technical support, please refer to the seller's policies or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.