1. Introduction
The KKMOON M506 Car Wireless Immobilizer is an advanced anti-theft system designed to protect your vehicle by intelligently cutting off the oil circuit. This compact device features a light and thin remote control with auto-sensing functionality, providing discreet and effective security. Its simple installation process, involving direct replacement of the oil circuit fuse, makes it a convenient solution for enhancing vehicle safety.
This manual provides detailed instructions for the installation, operation, and maintenance of your M506 Car Wireless Immobilizer. Please read it thoroughly before use to ensure proper functionality and safety.
2. Features
- Compact Design: Small unit size and light, thin remote control for easy carrying and discreet use.
- Wide Compatibility: Suitable for various 12V car and motorcycle models (excluding electric vehicles).
- Simple Installation: Easy fuse replacement installation without complex wiring.
- Intelligent Auto-Sensing: Remote control automatically senses proximity, eliminating the need for manual operation.
- Anti-Robbery Mode: Engine shuts off after 30 seconds if the remote control signal is not detected while driving (in automatic mode).
- Engine Start Protection: If the car does not receive the remote control signal within 16 seconds after starting, the engine will turn off. Normal operation resumes if the signal is received within 16 seconds.
- LED Indication: An LED flashes once when a remote control signal is received, confirming normal operation.
- Oil Circuit Cut-Off: Effectively cuts off the oil circuit to prevent unauthorized vehicle use.
3. Package Contents
Please check the package for the following items:
- 1 x Host Unit
- 2 x Remote Controllers
- 1 x User Manual

4. Installation Guide
The M506 immobilizer is designed for simple installation by replacing the vehicle's oil circuit fuse. Ensure the vehicle's ignition is off and the battery is disconnected before beginning installation.
- Identify the Oil Circuit Fuse: Locate the oil circuit fuse in your car's engine compartment. Refer to your vehicle's owner's manual for the exact location and identification of this fuse.
- Disconnect and Connect Main Unit: Carefully unplug the original oil circuit fuse. Plug the main unit of the M506 immobilizer directly into the fuse slot, replacing the original fuse.
- Connect to Battery Negative Terminal: Loosen the nut on the negative pole of your car's battery. Insert the immobilizer's negative wire plug into the connection point and tighten the nut securely. There is no need to connect to the positive pole.


After installation, ensure all connections are secure. Fix the main unit in a suitable location within the engine compartment and close the engine cover.
5. Operation
The M506 immobilizer operates with intelligent automatic induction, requiring minimal user interaction.
5.1 Normal Operation
- Keep one of the remote controllers with you (e.g., in your wallet or pocket). The system will automatically detect its presence.
- When you start your car, the immobilizer will search for the remote control signal.
- If the signal is detected within 16 seconds of starting the car, the engine will operate normally.
- If the signal is NOT detected within 16 seconds, the engine will turn off automatically.
- Once the car has started successfully with the remote control signal, it will continue to run even if the signal is temporarily lost (e.g., if the remote is moved out of range after starting).
5.2 Anti-Robbery Mode
This feature provides an additional layer of security against theft while driving.
- In automatic mode, the system continuously senses the remote control signal while the vehicle is in motion.
- If the remote control signal is lost (e.g., if the remote is taken from the driver during a robbery), the engine will shut off after 30 seconds.

5.3 LED Indication
- The LED indicator on the main unit will flash once when it successfully receives a signal from the remote control. This indicates that the signal is normal.
- If the LED does not flash, it indicates that no signal is being received.
6. Maintenance
The M506 Car Wireless Immobilizer requires minimal maintenance.
- Remote Control Battery: The remote controls use CR2032 3V batteries. If the remote control's range decreases or the system becomes unreliable, replace the battery.
- Keep Dry: Ensure the main unit and remote controls are kept dry and away from extreme temperatures.
- Regular Checks: Periodically check the wiring connections for any signs of wear or looseness.
7. Troubleshooting
If you encounter issues with your M506 Car Wireless Immobilizer, refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| Engine does not start or shuts off unexpectedly. | Remote control not detected or out of range. | Ensure the remote control is within range and its battery is functional. Keep the remote control on your person. |
| LED indicator on main unit does not flash. | No signal from remote control. | Check remote control battery. Ensure no strong interference sources are nearby. |
| System seems unresponsive. | Improper installation or loose connections. | Verify all installation steps, especially the fuse replacement and battery negative terminal connection. |
| Remote control range is reduced. | Low remote control battery. | Replace the CR2032 battery in the remote control. |
8. Specifications
| Parameter | Value |
|---|---|
| Unit Working Voltage | 12V±3V |
| Unit Quiescent Current | ≤12mA |
| Unit Control Current | ≤30A |
| Remote Control Operating Current | ≤3~8mA |
| Remote Control Standby Current | ≤1uA |
| Remote Control Battery Specification | CR2032, 3V, 240mAh |
| Remote Control Frequency | 433.92MHz |
| Unit Size (L x W x H) | 48 x 26 x 15mm (1.9 x 1.0 x 0.6in) |
| Remote Size (L x W x H) | 33 x 33 x 5mm (1.3 x 1.3 x 0.2in) |
| Package Size (L x W x H) | 165 x 92 x 48mm (6.5 x 3.6 x 1.9in) |
| Package Weight | 200g (7.1oz) |
8.1 Compatible Vehicle Types

- Car
- SUV
- Van / Small Truck
- Motorcycle (Gasoline)
Note: Electric cars, electric motorcycles, electric tricycles, and other electric vehicles are NOT suitable for this device.
9. Warranty and Support
For warranty information and customer support, please refer to your purchase documentation or contact the seller directly. Keep your proof of purchase for any warranty claims.
If you experience any issues not covered in the troubleshooting section, please reach out to the manufacturer's or seller's customer service for assistance.