1. Introduction
The ZOHAN Shot Timer is a professional-grade device designed for competitive shooting and practice across various disciplines such as USPSA, IDPA, IPSC, APSC, 3 Gun, and Steel Challenge. This compact and portable timer accurately records shot times, split times, and provides essential feedback to help shooters improve their performance. Featuring an intuitive LCD display and multiple operating modes, it is an indispensable tool for serious shooters.
2. Key Features
- Portable Design: Compact and lightweight (11*8.5*3.5 cm) with an easy-to-carry belt clip for convenience at the range.
- Intuitive Controls: Sensitive and easy-to-operate buttons for quick adjustments and mode selection.
- Night Vision LCD Screen: Clear LCD display with a green backlight that activates for 10 seconds upon button press, ensuring visibility in low-light conditions.
- Four Operating Modes:
- Default Delay Mode
- Instant Mode
- Delay & PAR Mode
- Instant & PAR Mode
- Accurate Shot Detection: Equipped with a sensitive microphone to accurately detect gunshots.
- Power Supply: Operates on a standard 9V high-quality alkaline battery.
- Durable Construction: Made from ABS Plastic.

3. Package Contents
Please check the package carefully to ensure all items are present:
- ZOHAN Shot Timer
- Carrying Pouch with belt clip
- User Manual (this document)

4. Setup
4.1 Battery Installation
- Locate the battery compartment on the back of the ZOHAN Shot Timer.
- Open the battery compartment cover.
- Insert one 9V high-quality alkaline battery, ensuring correct polarity (+/-).
- Close the battery compartment cover securely.

4.2 Power On/Off
- To power on the device, press and hold the "GO" button until the screen illuminates.
- To power off the device, press and hold the "GO" button again until the screen turns off.
5. Operating Instructions
5.1 Button Functions

- UP / DOWN Buttons:
- Choose between DELAY or INSTANT mode.
- Adjust the PAR time.
- View the last recorded round of shooting time.
- Buzzer: Produces an audible signal to start or indicate PAR time.
- RVW (Review) Button:
- View the last recorded round of shooting time.
- Enter settings menu.
- Confirm selected settings.
- Microphone: Detects gunshots to record timing data.
- GO Button:
- Powers the device On/Off.
- Initiates the timing sequence.
5.2 Display Information

| Indicator | Description |
|---|---|
| # | Shot Number |
| TIME | Total Shot Time |
| PAR | Indicates PAR State (target time) |
| FIRST SHOT | Time of the First Shot |
| LOWBAT | Low Battery Prompt |
| SET | Indicates setting mode for DELAY / INSTANT and PAR Mode |
| SPLIT | The Time Interval Between Two Consecutive Shots |
5.3 Operating Modes

- INSTANT Only: After pressing the "GO" button, the buzzer will sound immediately, and timing will start.
- DELAY Only: After pressing the "GO" button, the buzzer will sound and start timing after a 2.5-3 second countdown.
- INSTANT & PAR: PAR time is added to the instant mode. The buzzer will sound again at the end of the set PAR time.
- DELAY & PAR: PAR time is added to the delay mode. The buzzer will sound again at the end of the set PAR time.
To switch between modes and set PAR time, use the UP/DOWN buttons to navigate the settings menu after entering it with the RVW button. Confirm selections with RVW.
5.4 Setting Modes (Video Demonstration)
For a visual guide on setting the Instant & PAR Mode and Delay & PAR Mode, please refer to the video below:
6. Maintenance
- Keep the device clean and dry. Wipe with a soft, damp cloth if necessary. Do not use harsh chemicals or abrasive cleaners.
- Store the timer in its protective carrying pouch when not in use to prevent damage and dust accumulation.
- Remove the battery if the device will not be used for an extended period to prevent battery leakage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not power on. | Battery is dead or incorrectly installed. | Check battery polarity. Replace with a new 9V alkaline battery. |
| "LOWBAT" indicator appears on screen. | Battery power is low. | Replace the 9V alkaline battery immediately. |
| Inaccurate shot detection. | Microphone obstructed or ambient noise too high. | Ensure microphone is clear. Reduce ambient noise or adjust sensitivity settings if available (refer to advanced settings in manual if applicable). |
8. Specifications
| Attribute | Detail |
|---|---|
| Brand Name | ZOHAN |
| Model Number | Shot Timer |
| Product Name | Shot Timer |
| Features 1 | Firearms Shooting timer |
| Features 2 | Shot Watch |
| Features 3 | Buzzer shot timer |
| Size | 11*8.5*3.5 cm |
| Use for | USPSA, IDPA, IPSC, APSC, 3 Gun, Steel Challenge |
| Material | ABS Plastic |
| Certification | CE |
| Origin | Mainland China |
9. User Tips
- For optimal performance, ensure the timer's microphone is not obstructed and is positioned to clearly pick up gunshots.
- Practice with different modes to find the one that best suits your training needs.
- Regularly check the battery level, especially before important training sessions or competitions, to avoid interruptions.
10. Warranty and Support
ZOHAN products are manufactured to high-quality standards. For any issues or support inquiries, please refer to the seller's contact information or the official ZOHAN website for warranty details and customer service assistance.