Lemorele R100

Contents

Lemorele Wireless HDMI Extender Kit R100 Instruction Manual

Model: R100

1. Product Overview

The Lemorele R100 Wireless HDMI Extender Kit provides a reliable solution for transmitting 1080P Full HD video and audio wirelessly over long distances. This kit includes a Transmitter (TX) and a Receiver (RX) unit, designed for various applications such as monitoring, live production, and presentations.

Key Features:

  • 1080P HD Resolution: Supports up to 1080p @60Hz for clear and stable video.
  • Low Latency: Features approximately 0.12 seconds latency, suitable for real-time monitoring.
  • Extended Transmission Range: Up to 200 meters (656 feet) in open environments.
  • 5.8GHz Wireless Technology: Utilizes 5.8G high-speed transmission for strong signal.
  • USB-C Power: Both TX and RX units are powered via USB-C.
  • HDMI Loop Out: The Transmitter unit includes an HDMI output for local monitoring.
  • IR Remote Control: Allows control of the source device from the receiver location.
  • Multi-Receiver Support: One Transmitter can connect to up to four Receiver units.
Lemorele R100 Wireless HDMI Extender Kit

Lemorele R100 Wireless HDMI Extender Kit showing both transmitter and receiver units.

2. Package Contents

Please check the package carefully to ensure all items are present:

Packing list for Lemorele R100 Wireless HDMI Extender Kit

Diagram illustrating the components included in the R100 Wireless HDMI Extender Kit.

  • 1 x Transmitter-Receiver Unit (TX)
  • 1 x Receiver Unit (RX) (Note: Some kits may include only one RX unit, or additional RX units can be purchased separately.)
  • 4 x Antennas
  • 1 x User Manual
  • 2 x HDMI Cables
  • 2 x USB-C Power Cables
  • 2 x HDMI Converters (adapters)
  • 1 x Cold Shoe Mount
  • 2 x IR Cables

3. Setup and Installation

Follow these steps to set up your Lemorele Wireless HDMI Extender Kit:

Official installation and usage video for the Lemorele R100 Wireless HDMI Extender Kit.

  1. Connect Antennas: Screw the two antennas firmly onto the TX (Transmitter) unit and the two antennas onto the RX (Receiver) unit.
  2. Power the TX Unit: Connect one end of a USB-C power cable to the TX unit's USB-C port and the other end to a 5V/2A power adapter (not included) or a compatible USB power source.
  3. Connect Source Device to TX: Connect an HDMI cable from your source device (e.g., camera, laptop, DVD player) to the HDMI IN port on the TX unit.
  4. Optional: TX Loop Out: If you need a local display for monitoring, connect an HDMI cable from the HDMI OUT port on the TX unit to a local monitor.
  5. Mount TX Unit (Optional): If using with a camera, attach the cold shoe mount to the TX unit and then to your camera's hot shoe.
  6. Power the RX Unit: Connect the second USB-C power cable to the RX unit's USB-C port and to a 5V/2A power adapter or compatible USB power source.
  7. Connect Display to RX: Connect an HDMI cable from the HDMI OUT port on the RX unit to your display device (e.g., TV, projector, monitor).
  8. Power On: Press the power button on both the TX and RX units to turn them on. The LED indicators will light up.
  9. Pairing: The TX and RX units should automatically pair. Wait for a successful connection, indicated by the status lights on both units. Once connected, the video from your source device will appear on the display connected to the RX unit.
  10. IR Remote Setup: Connect the IR Blaster cable to the IR OUT port on the TX unit and position the IR emitter near the IR sensor of your source device. Connect the IR Receiver cable to the IR IN port on the RX unit and position the IR receiver where it can receive signals from your remote control.
Diagram of TX and RX ports and connections

Detailed view of the Transmitter (TX) and Receiver (RX) units, highlighting power buttons, LED indicators, USB-C chargers, HDMI IN/OUT, and IR ports.

4. Operation

4.1 Video Transmission

Once the TX and RX units are successfully connected, the video and audio from your HDMI source will be wirelessly transmitted to the connected display. The system operates on the 5.8GHz frequency band, providing a stable connection.

1080p 60Hz live stream setup with Lemorele R100

Illustration of the R100 providing direct video for live streaming at HD 1080P 60Hz with no compression.

4.2 Multi-Receiver Functionality (1 TX to 4 RX)

The Lemorele R100 system supports connecting one Transmitter unit to up to four Receiver units simultaneously. This allows for multi-screen monitoring or distribution of the video signal to multiple displays.

Diagram showing one transmitter connected to four receivers

Visual representation of one Transmitter (TX) unit broadcasting to four Receiver (RX) units for multi-screen monitoring.

4.3 IR Remote Control

The included IR cables enable you to control your HDMI source device (e.g., DVD player, set-top box) from the location of your display. Ensure the IR Blaster is correctly positioned near the source device's IR sensor and the IR Receiver is visible to your remote control.

4.4 Transmission Distance Considerations

The maximum transmission range of 200 meters (656 feet) is achieved in an open, unobstructed environment. Obstacles such as walls, bricks, or glass can significantly reduce the effective transmission distance and signal quality. For optimal performance, minimize obstructions between the TX and RX units.

Diagram illustrating 200m transmission range with low latency

Visualizing the 656ft (200M) transmission range and 0.12S low latency for real-time monitoring and efficient live production.

5. Specifications

FeatureDescription
BrandLemorele
Model NumberR100
Connectivity TechnologyUSB, HDMI
Resolution1080P @60Hz
Latency0.12 seconds (approx.)
Transmission RangeUp to 200m (656ft) in open field
Frequency Band5.8GHz
ColorBlack
MaterialAluminum alloy
Power Input5V/2A (USB-C)
Memory1Gbit
ApplicationMonitor, DVD Player, Projector, Television, TV box, Camera, Laptop, PC systems
Connector TypeHDMI-Compatible (Male-Female)
CertificationCE
OriginMainland China
Package TypeCarton Box
Dimensions (approx.)4.6in x 2.7in x 0.9in (per unit)

6. Troubleshooting

6.1 No Signal / Disrupted Signal

  • Check Power: Ensure both TX and RX units are properly connected to a 5V/2A power source via their USB-C cables. The units do not contain internal batteries and require continuous external power.
  • Check HDMI Connections: Verify that all HDMI cables are securely connected to the correct IN/OUT ports on the TX/RX units and your source/display devices.
  • Antenna Connection: Make sure all four antennas are securely screwed onto their respective units.
  • Obstructions: Wireless signal can be significantly affected by physical barriers. Try to minimize walls, furniture, or other objects between the TX and RX units. Walls, bricks, or glass can shorten signal coverage or cause severe signal loss.
  • Distance: Ensure the TX and RX units are within the effective transmission range (up to 200m in open line-of-sight).
  • Interference: Other 5.8GHz wireless devices might cause interference. Try to move the units away from other wireless equipment.
  • Pairing: Confirm that the TX and RX units are paired. If not, power cycle both units.

6.2 RX Unit Not Working Independently

The RX (Receiver) unit cannot be used independently. It must be paired and used in conjunction with a TX (Transmitter) unit to function.

Lemorele R100 RX unit with note about pairing

The RX unit, with a crucial note: it cannot be used independently and must be paired with the TX for operation.

6.3 IR Remote Control Issues

  • IR Cable Placement: Ensure the IR Blaster is directly facing the IR sensor of your source device and the IR Receiver is in a clear line of sight of your remote control.
  • Remote Compatibility: Verify your remote control is compatible with your source device.

7. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the units. Do not use liquid cleaners or aerosols.
  • Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures.
  • Handling: Handle the units with care to avoid physical damage. Do not drop or expose them to excessive force.
  • Ventilation: Ensure the units have adequate ventilation to prevent overheating.

8. User Tips

  • Power Supply: Always use a stable 5V/2A power adapter for both the Transmitter and Receiver units to ensure consistent performance.
  • Optimal Placement: For the best signal quality and range, try to maintain a clear line of sight between the TX and RX antennas. Avoid placing units behind large metal objects or thick walls.
  • Multi-Receiver Setup: When using multiple RX units, ensure they are all within the effective range of the single TX unit. The transmission distance may decrease slightly with more RX units connected.
  • Latency Awareness: While the latency is low (approx. 0.12s), it's important to be aware of this slight delay for applications requiring absolute real-time synchronization.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or visit the official Lemorele website. Keep your purchase receipt as proof of purchase.


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.