1. Introduction
The Tedeligo Tuya WiFi RF Smart Garage/Gate Controller is a versatile device designed to provide smart control over your garage doors, sliding gates, and other compatible devices. It integrates WiFi, RF 433MHz, and voice control capabilities, offering convenience and enhanced automation for your home or property.
Key features include:
- Multiple Control Methods: Control via Tuya/Smart Life App, RF 433MHz remote controls, and voice assistants like Alexa and Google Assistant.
- Wide Compatibility: Supports various garage/gate brands such as FAAC, DITEC, NICE, BFT, and DOORHAN.
- Code Support: Compatible with rolling code (e.g., HCS301), learning code (e.g., EV1527), and fixed code (e.g., PT2262) remotes.
- Flexible Power Input: Operates on DC / AC 5-48V, making it suitable for a wide range of applications (12V and 24V systems supported).
- Timing Functions: Set schedules and countdown timers via the mobile application.
- Multi-Device Control: Supports pairing with up to 32 RF remotes for group control.
- Certified Quality: Products are CE, CCC, and RoHS certified.
2. Safety Information
- Ensure all wiring is performed by a qualified professional to prevent electrical hazards.
- Always disconnect power before performing any installation or maintenance.
- Do not expose the device to moisture or extreme temperatures.
- Signal pairing is required before using the remote control functions.
- Keep the device out of reach of children.
3. Package Contents
Depending on your purchase, the package may include:
- 1 x Tedeligo Smart Switch (Receiver)
- 1 x RF Remote Control (2 or 4 buttons, with 2*CR2016 / 1*CR2016 battery included) - Note: Remote quantity may vary based on selected SKU.
- 1 x User Manual (PDF available online)
4. Specifications
Receiver (Smart Switch)
| Feature | Specification |
|---|---|
| Model Number | TEDE Tuya WiFi RF Garage Controller DC AC 12V 24V |
| Working Voltage | DC / AC 5V - 48V (e.g., 6V, 12V, 24V) |
| Max Current | 3A |
| Channels | 2 |
| Control Way | Tuya APP + 433MHz RF + Voice (Alexa / Google / Alice) |
| WiFi Standard | IEEE 802.11 b/g/n |
| RF Code Support | Rolling code / Learning code / Fixed code (HCS300, HCS301, EV1527, PT2262, HT6P20, etc.) |
| Working Mode | Momentary / Toggle |
| Switch Size | 94*60*28 mm |
| Application | Led light lamp bulb switch, Home garage control system (FAAC, DITEC, NICE, BFT, DOORHAN, etc.) |
| Certification | CE |
RF Remote Control
| Feature | Specification |
|---|---|
| Buttons | 2 / 4 buttons |
| Size | 60*30 mm |
| Battery | 2*CR2016 / 1*CR2016 (Included) |
| Remote Range | Up to 30m (in open area) |
| Material | Plastic |
5. Setup
5.1 Wiring the Smart Switch
The input power can be DC / AC 5-48V. You can connect the smart switch to your garage control system, sliding door opener, or lights. Ensure the device is in the wiring state before connecting.
5.2 Tuya App Connection (WiFi)
Follow these steps to connect your smart switch to the Tuya/Smart Life App:
- Scan the QR code (provided in the product packaging or online) to download the Tuya/Smart Life App.
- Open the App and click "Add Device".
- Select the device automatically searched by Bluetooth, or manually add it (e.g., select "Breaker" or "Garage Door Opener").
- Connect your phone to a 2.4GHz WiFi network and enter the WiFi password in the App.
- Press and hold the learning button on the device (refer to Figure 1 for location) for more than 8 seconds until the WiFi indicator flashes rapidly.
- Click "Next" in the App and wait for the device to connect successfully.
- Once connected, you can control the device via your phone. You can also share control with other phones through the App's sharing function.
5.3 RF Remote Pairing
Before pairing, you need to select a working mode for the switch:
- Momentary Mode: Connect the jumper cap with 'M' on the board. In this mode, the relay activates only while the remote button is pressed and held.
- Toggle Mode: Connect the jumper cap with 'T' on the board. In this mode, pressing the remote button once activates the relay, and pressing it again deactivates it.
To pair the remote:
- Ensure the jumper cap is set to either 'M' (Momentary) or 'T' (Toggle) mode.
- Press learning button 1 once on the smart switch (refer to Figure 1 for location). The RF indicator will light up.
- Press button A on your RF remote control once. The RF indicator will flash, indicating successful pairing for the 1st channel.
- Press learning button 2 once on the smart switch. The RF indicator will light up.
- Press button B on your RF remote control once. The RF indicator will flash, indicating successful pairing for the 2nd channel.
6. Operation
6.1 Control Methods
The smart switch offers three primary control methods:
- RF Remote Control: Use the paired 433MHz RF remote to open/close your garage door or gate.
- Tuya/Smart Life App Control: Use your smartphone to control the device from anywhere, set schedules, and countdown timers.
- Voice Control: Integrate with Alexa or Google Assistant for hands-free operation.
6.2 Group Control
The system supports both WiFi group control and RF multi-control, allowing you to manage multiple devices or control a single device from multiple remotes.
7. Maintenance
- Keep the device clean and dry. Avoid exposure to dust, dirt, and liquids.
- Regularly check wiring connections for any signs of wear or damage.
- Replace remote control batteries as needed (CR2016 or CR2032).
- Ensure the device is placed in a well-ventilated area to prevent overheating.
8. Troubleshooting
| Problem | Possible Cause / Solution |
|---|---|
| Device not connecting to WiFi (Blue indicator flashing) |
|
| Device not responding (Blue indicator not blinking) |
|
| RF Remote not working |
|
| Cannot use different modes for channels | The two channels (CH1 and CH2) must operate in the same mode (either Momentary or Toggle). You cannot mix modes. |
| Deleting paired remotes | Click the learning button (1 or 2) 8 times continuously. The indicator will flash, and all matched remotes will be deleted. |
9. User Tips
- Remote Compatibility: Note that the receiver is designed to work with the specific remotes provided by Tedeligo. Your existing remotes may not be compatible.
- Multiple Remotes: The receiver supports pairing with up to 32 RF remotes. This is useful for multi-user access or controlling from different locations.
- PDF Manual: For a comprehensive guide, refer to the official user manual (PDF) available online.
10. Warranty and Support
This product is manufactured under strict quality control and is CE, CCC, and RoHS certified.
For further assistance or inquiries, please contact customer support:
- WhatsApp: +8613502278583 / +86181 3880 5271
- Email: dieseelectronic@163.com
A detailed user manual in PDF format is available for download. Please refer to the product page or contact support for the link.