1. Introduction
This manual provides comprehensive instructions for the safe and efficient operation, installation, and maintenance of your FDIK 5KW Portable Diesel Heater. Please read this manual thoroughly before using the heater and keep it for future reference.
The FDIK 5KW Portable Diesel Heater is an all-in-one heating solution designed for various applications, including vehicles, RVs, tents, and other spaces requiring efficient and portable heating. It features a knob LCD control panel with Bluetooth connectivity for convenient operation.
2. Safety Information
Always prioritize safety when operating the diesel heater. Failure to follow these instructions could result in fire, electric shock, serious injury, or death.
- Ensure adequate ventilation when operating the heater to prevent carbon monoxide buildup.
- Do not operate the heater in enclosed spaces without proper exhaust ventilation.
- Keep flammable materials at a safe distance from the heater (minimum 1 meter / 3 feet).
- Do not touch hot surfaces during or immediately after operation.
- Ensure the heater is placed on a stable, non-flammable surface.
- Only use diesel fuel as specified.
- Keep children and pets away from the operating heater.
- Disconnect power before performing any maintenance or cleaning.
3. Product Overview
The FDIK 5KW Portable Diesel Heater is designed for efficient and reliable heating. Key features include:
- Integrated shell molding for durability and aesthetics.
- Thickened casing (0.3-1.1mm) for enhanced protection and heat transfer.
- Efficient combustion system with aluminum body for fuel saving and 100% combustion.
- LCD controller with knob switch, function button, and OK button.
- Bluetooth control via a dedicated APP (for Android devices).
- 24-hour timing function for scheduled startup and shutdown.
- Adjustable temperature (10°C to 40°C) and power (H1 to H6).
- Aviation plug for waterproof, moisture-proof, and easy connections.
- Foldable handle for portability and space-saving.

Figure 3.1: FDIK 5KW Portable Diesel Heater (White and Black models shown).

Figure 3.2: Included Accessories: Heater unit, Remote Control, Air filter, Exhaust pipe, Tubing, Silencer, Instructions, Power cable, Screw accessory kit, Transformer.

Figure 3.3: Internal Components: Motor Assembly (copper core, dynamic balance), Combustion Chamber (aluminum, 310S stainless steel, 100% combustion), Glow Plug (Kyocera ignition pin, 1200-1300°C stable), Oil Pump (high-quality copper core, low noise, 95% fuel efficiency).

Figure 3.4: Combustion Process Diagram, showing air intake, diesel injection, and fume exhaust, highlighting fuel saving, aluminum body, and 100% combustion.

Figure 3.5: Design Features: Integrated shell molding, thickened casing for durability, waterproof aviation plug, and foldable handle for portability.
4. Specifications
| Attribute | Value |
|---|---|
| Brand Name | FDIK |
| Model Name | Panda S (also available as Panda M) |
| Item Type | Heating & Fans |
| Thermal Power (W) | 1000-5000W |
| Power (W) | 5000W |
| Voltage | 12V, 24V, 220V (depending on model/configuration) |
| Fuel | Diesel |
| Operating Temperature | -40°C to 40°C |
| Air Volume | 60-180m³/h |
| Item Weight | 9.5kg |
| Item Diameter | 7.5cm |
| Origin | Mainland China |
| Certification | CE, RoHS |

Figure 4.1: Technical Specifications Summary.
5. Setup and Installation
Before starting, ensure you have all components listed in the accessories section (Figure 3.2).
5.1 Component Identification (LCD Controller)

Figure 5.1: LCD Controller Layout. Features include a Function button, Knob switch, and OK button for navigation and settings adjustment.
5.2 Initial Setup Steps
- Placement: Position the heater on a flat, stable, and non-flammable surface. Ensure there is sufficient clearance around the air intake and exhaust outlets.
- Exhaust System: Connect the exhaust pipe and silencer securely. Ensure the exhaust fumes are directed safely outside and away from any occupied spaces or flammable materials.
- Air Filter: Install the air filter onto the air intake.
- Fuel Connection: Fill the integrated fuel tank with clean diesel fuel. Ensure the fuel cap is securely tightened.
- Power Connection: Connect the power cable to the heater and then to the appropriate power source (12V, 24V, or 220V, depending on your model and power supply). Use the provided transformer if necessary for 220V operation. Ensure the aviation plug is securely connected, as it is designed to be waterproof and moisture-proof.
- Remote Control: Insert batteries into the remote control.
6. Operating Instructions
The heater can be operated via the LCD control panel, remote control, or Bluetooth APP.
6.1 Using the LCD Control Panel
- Power On/Off: Press and hold the OK button (usually the power symbol) to turn the heater on or off.
- Temperature Adjustment: Rotate the Knob switch to adjust the desired temperature. The temperature can be adjusted from 10°C to 40°C. Press the OK button to confirm the setting.
- Power Adjustment: Press the Function button to cycle through settings until you reach the power adjustment mode. Rotate the Knob switch to select power levels from H1 to H6. Press the OK button to confirm.
- 24-Hour Timing: Use the Function button to navigate to the timing settings. Rotate the Knob switch to set the desired startup and shutdown times. Press the OK button to activate the timer.
- Run Time Display: The LCD displays the heater's run time. This resets every 100 hours.
6.2 Bluetooth Control (Android APP)
For Android users, the heater can be controlled via a dedicated Bluetooth APP. Ensure your device is within Bluetooth connection range. If the device exceeds the range, control will be lost.
- Download and install the official FDIK heater APP on your Android device.
- Enable Bluetooth on your device and ensure the heater is powered on.
- Open the APP and follow the on-screen instructions to pair with your heater.
- Once connected, you can adjust temperature, power, and set timers directly from the APP.
6.3 Remote Control
The included remote control allows for convenient operation from a distance.
- Use the ON/OFF buttons to power the heater.
- Refer to the remote control's specific buttons for temperature and power adjustments.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your heater.
- Cleaning: Periodically clean the exterior of the heater with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Air Filter: Check and clean the air filter regularly. A clogged filter can reduce efficiency and lead to overheating. Replace if damaged.
- Exhaust System: Inspect the exhaust pipe and silencer for any blockages or damage. Ensure connections remain secure.
- Fuel System: Use clean diesel fuel. Avoid using contaminated or old fuel, which can cause blockages and damage to the fuel pump and combustion chamber.
- Glow Plug: While designed for durability, if the heater fails to ignite, the glow plug may need inspection or replacement by a qualified technician.
- Storage: If storing the heater for an extended period, drain the fuel tank and ensure all components are clean and dry. Store in a cool, dry place.
8. Troubleshooting
If you encounter issues with your FDIK diesel heater, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on | No power, loose connection, faulty switch | Check power supply and connections. Ensure the power button is pressed correctly. |
| Heater turns on but does not ignite | No fuel, clogged fuel line, faulty glow plug, air in fuel line | Check fuel level. Inspect fuel lines for blockages. Bleed air from the fuel system if necessary. Consult a technician for glow plug issues. |
| Low heat output | Clogged air filter, low power setting, insufficient fuel flow | Clean or replace air filter. Increase power setting. Check fuel supply. |
| Excessive smoke or unusual odor | Poor combustion, incorrect fuel, exhaust blockage | Ensure proper ventilation. Use clean diesel fuel. Check exhaust for blockages. Turn off immediately and inspect if problem persists. |
| Bluetooth connection issues | Out of range, APP not installed, Bluetooth off on device | Ensure device is within range. Verify APP installation and Bluetooth is enabled. Restart APP and heater. |
If the problem persists after attempting these solutions, please contact customer support.
9. User Tips
- Pre-heating: For optimal performance in very cold conditions, allow the heater to run on a lower setting for a few minutes before increasing to the desired heat level.
- Fuel Quality: Always use high-quality, clean diesel fuel to prevent clogging and ensure efficient combustion.
- Ventilation: Even with proper exhaust, ensure some fresh air circulation to prevent stuffiness and maintain air quality.
- Power Source: If using a 12V or 24V power source (e.g., vehicle battery), monitor battery voltage to avoid draining it completely.
- Bluetooth Range: Keep your Android device relatively close to the heater for stable Bluetooth control.
10. Warranty and Support
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your seller or the official FDIK website. Keep your purchase receipt as proof of purchase.